Microtubes X Ultra Bass Preamp & Distortion


Price:
Sale priceCAD$619.95
Stock:
Sold out

Description

The Microtubes X Ultra greatly expands on the already immense versatility of the Microtubes X7. Featuring all the great controls that its predecessor has that allows users to select exactly what frequencies they want to compress and saturate for the low and treble respectively, but with four major additions providing an additional layer of flexibility, while maintaining the same compact footprint, making it an extremely complete tool for the modern bassist.

Front Features

Low Comp

Controls compression amount for the low band. Both threshold and makeup gain are controlled to maintain a constant level. This control is also used to control the compression amount when the compressor is enabled for clean signal in Darkglass Suite.

Low Level

Sets the output volume of the low-pass signal.

Low Pass Frequency

Controls the cut-off frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.

High Level

Sets the output volume of the distorted high-pass signal.

High Drive

Sets the amount of distortion for the high pass side.

High Pass Frequency

Controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.

Master

+-12 dB. Sets the overall volume of the unit.

Bass

Low shelf +-12dB @ 80 Hz

Mid bands

+-10dB @ 250 Hz, 500 Hz, 1.5 kHz, 3 kHz

Treble

High shelf +-12dB @ 5 kHz

Darkglass Suite 

Utilizing the desktop version of the Darkglass Suite allows you to load one of the available impulses responses of our library or add you custom / third party impulses to use with your pedal. In addition you can control the headphones level output.

Input & Outputs

nput

Connect your instrument or output from your pedal board to the ¼” mono jack. 

Aux In

This 3.5mm stereo input allows you to practice with backing tracks from e.g. your smartphone or laptop. Auxiliary input can only be used with the headphone output.

The pedal does not control the level, it must be set from your audio source. Remember to always first set the level low before connecting anything to the aux in! 

Headphone Output

Microtubes X Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack. Use the Master volume control to adjust the level.

9V DC

Only use a regulated 9V DC adapter with a center-negative plug 

Output

Connect from the ¼” Output jack to the input of your amplifier or another effects pedal. 

Direct Output

Balanced XLR output for connecting the pedal to a microphone preamp, PA system etc. 

Ground lift

Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output.

Cab Sim

Toggle the cabinet simulation on/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed. 

USB

A Micro USB B connector allows you to connect the pedal to PC/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.

Video Review: Microtubes X Ultra Bass Preamp & Distortion

Specifications

Brand Darkglass Electronics
Weight (kg) 0.43 kg
Width (cm) 12.5
Length (cm) 9.5
Height (cm) 5.7
Battery No
Expression No
Jacks position on top Yes
Switching presets No
Power Supply 9 Volt
Tap tempo No
Bypass True bypass
Digital or Analog Analog
Current Draw, mA 200
Input Impedance, kΩ 1000
Output Impedance, Ω 1000
Best For Bass Guitars

You May Also Like

Recently viewed