{"title":"New Arrivals","description":"","products":[{"product_id":"meris-enzo-multi-voice-instrument-synthesizer","title":"Meris Enzo Multi-Voice Instrument Synthesizer Pedal, Poly\/Mono\/Arp Modes, Stereo, MIDI","description":"\u003cp\u003eThe Meris Enzo turns your guitar or bass into a multi-voice synthesizer, tracking your playing in real time for tight monosynth leads, thick polyphonic chords, or sequenced arpeggios — with no special pickup to install.\u003c\/p\u003e\u003cp\u003eEnzo is the original two-footswitch Multi-Voice Instrument Synthesizer: a six-type filter with an envelope, a two-tap delay of up to \u003cstrong\u003e530 ms\u003c\/strong\u003e, ring modulation, stereo input and output, and presets over MIDI or the Meris Preset Switch, in a compact brushed-aluminum enclosure designed and built in California.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Enzo\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTracks a standard guitar or bass signal directly — no special synth pickup to install; switchable headroom also accepts synth and line-level sources.\u003c\/li\u003e\n\u003cli\u003eFour playable modes (Poly, Mono, Arp, Dry) cover chordal pads, dual-oscillator monophonic leads, sequenced arpeggios linked to tap tempo, and a Dry mode that runs your own signal through the filter, delay and pitch shift.\u003c\/li\u003e\n\u003cli\u003eSix-type multimode filter spans Ladder and State Variable lowpass, bandpass and highpass tones.\u003c\/li\u003e\n\u003cli\u003eBuilt-in two-tap delay and ring modulator add movement and texture without extra pedals.\u003c\/li\u003e\n\u003cli\u003eUp to \u003cstrong\u003e16\u003c\/strong\u003e presets over MIDI, or \u003cstrong\u003e4\u003c\/strong\u003e with the Meris Preset Switch.\u003c\/li\u003e\n\u003cli\u003eSelectable delay trails let echoes ring out naturally after you bypass.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch \/ Portamento (Alt)\u003c\/strong\u003e — Shifts the synth or dry signal in half-step increments; the Alt layer sets portamento glide time between notes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter \/ Filter Type (Alt)\u003c\/strong\u003e — Sweeps the multimode synth filter's cutoff; Alt cycles through six filter types: Ladder Lowpass, Ladder Shelving Bandpass, Ladder Highpass, State Variable Lowpass, State Variable Bandpass and State Variable Highpass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix \/ Delay Level (Alt)\u003c\/strong\u003e — Blends synth signal with your dry input; Alt sets the level of the built-in two-tap delay (\u003cstrong\u003e530 ms\u003c\/strong\u003e max).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Envelope \/ Filter Bandwidth (Alt)\u003c\/strong\u003e — Sets attack and decay for the triggered envelope, or direction and sensitivity for the envelope follower; Alt adjusts filter bandwidth (resonance).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModulation \/ Delay Feedback (Alt)\u003c\/strong\u003e — Detunes the synth oscillators (sets delay modulation in Dry mode); Alt sets delay feedback for longer, more repeating echoes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSustain \/ Ring Mod (Alt)\u003c\/strong\u003e — Extends synth note sustain up to an endless hold (compresses the input in Dry mode); Alt dials in ring modulator frequency for metallic, bell-like overtones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlt (HOLD) button\u003c\/strong\u003e — Press and hold to access the second layer of functions on every knob above.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode button\u003c\/strong\u003e — Chooses Poly, Mono, Arp, or Dry mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap footswitch \/ Envelope Type (Alt)\u003c\/strong\u003e — Taps in delay time and arpeggiator tempo; hold for momentary max delay feedback. Alt toggles between Triggered and Envelope Follower envelope types.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBypass footswitch \/ Synth Waveshape (Alt)\u003c\/strong\u003e — Engages or bypasses the effect; Alt selects sawtooth or square oscillator waveshape.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput: one 1\/4\" TRS jack, switchable mono or stereo (use a TRS-Y cable for stereo sources).\u003c\/li\u003e\n\u003cli\u003eOutputs: two 1\/4\" jacks, LEFT and RIGHT; use LEFT alone for mono.\u003c\/li\u003e\n\u003cli\u003eMulti-function EXP jack: expression pedal (controls all parameters at once), Meris Preset Switch, external tap switch, or MIDI in\/out over TRS with a MIDI-to-TRS box such as the Meris MIDI I\/O. MIDI beat clock sync is supported.\u003c\/li\u003e\n\u003cli\u003eSelectable relay true bypass or analog buffered bypass.\u003c\/li\u003e\n\u003cli\u003ePower: \u003cstrong\u003e9V DC\u003c\/strong\u003e, center-negative, \u003cstrong\u003e2.1 mm\u003c\/strong\u003e barrel, drawing under \u003cstrong\u003e150 mA\u003c\/strong\u003e. Power supply not included; battery operation is not supported.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMeris Enzo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect type\u003c\/th\u003e\n\u003ctd\u003eMulti-voice instrument synthesizer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSynth modes\u003c\/th\u003e\n\u003ctd\u003ePoly, Mono, Arp, Dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e6\u003c\/strong\u003e types (Ladder and State Variable LP \/ BP \/ HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDelay\u003c\/th\u003e\n\u003ctd\u003eTwo-tap, \u003cstrong\u003e530 ms\u003c\/strong\u003e max, selectable trails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePresets\u003c\/th\u003e\n\u003ctd\u003eUp to \u003cstrong\u003e16\u003c\/strong\u003e via MIDI, \u003cstrong\u003e4\u003c\/strong\u003e via Preset Switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverters \/ DSP\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24\u003c\/strong\u003e-bit A\/D and D\/A, \u003cstrong\u003e32\u003c\/strong\u003e-bit floating-point DSP, JFET input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInputs\u003c\/th\u003e\n\u003ctd\u003e1 x 1\/4\" TRS (mono \/ stereo), guitar or synth\/line headroom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e2 x 1\/4\" (L \/ R)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003ctd\u003eEXP jack: expression, Preset Switch, tap, MIDI over TRS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBypass\u003c\/th\u003e\n\u003ctd\u003eSelectable relay true bypass or analog buffered bypass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, 2.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; \u003cstrong\u003e150 mA\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4.25 W x 4.5 L x 2 H in\u003c\/strong\u003e (\u003cstrong\u003e108 x 114 x 51 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e410 g\u003c\/strong\u003e (\u003cstrong\u003e14.5 oz\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGold over brushed aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a special pickup for Enzo to track my guitar?\u003c\/strong\u003e No. Enzo tracks a standard guitar or bass signal directly, with no special pickup installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between Enzo and Enzo X?\u003c\/strong\u003e Enzo has a single Filter Envelope knob plus a Sustain control, one \u003cstrong\u003e530 ms\u003c\/strong\u003e two-tap delay and no onboard reverb, in a compact two-footswitch pedal. Enzo X adds full ADSR envelopes, dual \u003cstrong\u003e2500 ms\u003c\/strong\u003e delays, three reverbs, drives, 6-voice polyphony playable by MIDI keyboard, a color screen and \u003cstrong\u003e99\u003c\/strong\u003e presets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I recall presets without MIDI?\u003c\/strong\u003e Yes. Four presets are reachable with the Meris Preset Switch, and up to \u003cstrong\u003e16\u003c\/strong\u003e over MIDI using a MIDI-to-TRS interface such as the Meris MIDI I\/O.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Enzo work in stereo?\u003c\/strong\u003e Yes. The input can be switched to accept a TRS stereo signal with a TRS-Y cable, and Enzo has separate LEFT and RIGHT outputs; use LEFT alone for mono.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Enzo work on bass and keyboards?\u003c\/strong\u003e Yes. It tracks bass as well as guitar, and the input\/output headroom switches between guitar and synth\/line level for keyboards and other line sources.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does Enzo need?\u003c\/strong\u003e \u003cstrong\u003e9V DC\u003c\/strong\u003e, center-negative, \u003cstrong\u003e2.1 mm\u003c\/strong\u003e barrel, drawing under \u003cstrong\u003e150 mA\u003c\/strong\u003e. A power supply is not included and the pedal does not run on batteries; an isolated multi-output supply is recommended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I add MIDI control to Enzo?\u003c\/strong\u003e Connect a MIDI-to-TRS interface such as the Meris MIDI I\/O to Enzo's EXP jack with a TRS cable; it converts standard 5-pin DIN MIDI to the TRS connection Enzo uses, including beat clock sync.\u003c\/p\u003e","brand":"Meris","offers":[{"title":"Default Title","offer_id":43126138568957,"sku":"862539000483","price":429.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/meris-enzo-front.jpg?v=1785534488"},{"product_id":"meris-hedra-3-voice-rhythmic-pitch-shifter","title":"Meris Hedra 3-Voice Rhythmic Pitch Shifter Pedal, Diatonic Harmonies, Tap Tempo, Stereo","description":"\u003cp\u003eThe Meris Hedra stacks up to three independently pitch-shifted, tempo-synced voices to turn a single guitar or bass line into rhythmic arpeggios, thick harmonies, or pulsing textures.\u003c\/p\u003e\u003cp\u003eEach voice has its own interval, from two octaves down to two octaves up, and its own rhythmic time division, and the Key control keeps harmonies diatonic in a chosen key and scale or switches to chromatic shifting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Hedra\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThree independently pitched voices turn a single note or chord into rhythmic arpeggios and thick harmonies.\u003c\/li\u003e\n\u003cli\u003eTap tempo locks every voice's rhythm to your song, and MIDI beat clock sync is available too.\u003c\/li\u003e\n\u003cli\u003ePer-voice pitch intervals span wide harmony and unison-detune textures in one pedal; Micro Tune adds synth-like detuned fattening.\u003c\/li\u003e\n\u003cli\u003ePitch correction and glide let voices snap to the scale or slide between intervals.\u003c\/li\u003e\n\u003cli\u003eUp to \u003cstrong\u003e16\u003c\/strong\u003e presets over MIDI, or \u003cstrong\u003e4\u003c\/strong\u003e with the Meris Preset Switch.\u003c\/li\u003e\n\u003cli\u003eMIDI over the multi-function EXP jack unlocks full remote control with a MIDI-to-TRS interface such as the Meris MIDI I\/O.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey \/ Scale Type (Alt)\u003c\/strong\u003e — Sets the key for diatonic harmonies (maximum = chromatic shifting); Alt selects the scale: Major, Minor, Melodic Minor, Harmonic Minor, Double Harmonic, Eastern Pentatonic or Minor Pentatonic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicro Tune \/ Pitch Correction + Glide (Alt)\u003c\/strong\u003e — Slightly detunes all three voices; Alt selects no, loose or strict pitch correction (min to mid) or sets glide time between shifted notes (mid to max).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix \/ Delay Feedback (Alt)\u003c\/strong\u003e — Balances shifted voices against your dry signal; Alt sets feedback on Hedra's onboard delay for repeating pitched trails.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch 1 \/ Time Division 1 (Alt)\u003c\/strong\u003e — Sets the shifted interval for voice 1; Alt sets that voice's rhythmic time division relative to the tapped tempo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch 2 \/ Time Division 2 (Alt)\u003c\/strong\u003e — Sets the shifted interval for voice 2; Alt sets that voice's rhythmic time division.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch 3 \/ Time Division 3 (Alt)\u003c\/strong\u003e — Sets the shifted interval for voice 3; Alt sets that voice's rhythmic time division.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlt (HOLD) button\u003c\/strong\u003e — Hold to access the second layer of functions on every knob and footswitch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode button\u003c\/strong\u003e — Chooses the delay arrangement: Dual (two short delays, stereo output), Dual + Series (with cross-feedback), Series (one long delay) or Pitch Feedback (pitch shifters inside the feedback loop).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap footswitch \/ Half Speed (Alt)\u003c\/strong\u003e — Taps in the tempo the three voices sync to; hold for an automatic volume swell based on pick attack; Alt engages half-speed timing for slower, more spacious patterns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBypass footswitch \/ Pitch Smoothing (Alt)\u003c\/strong\u003e — Engages or bypasses the effect; Alt toggles pitch control smoothing (off gives hard-stepped intervals).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput: one 1\/4\" TRS jack, switchable mono or stereo; switchable guitar or synth\/line headroom.\u003c\/li\u003e\n\u003cli\u003eOutputs: two 1\/4\" jacks, left and right.\u003c\/li\u003e\n\u003cli\u003eMulti-function EXP jack: expression pedal (controls all parameters at once), Meris Preset Switch, external tap switch, or MIDI in\/out over TRS with a MIDI-to-TRS box.\u003c\/li\u003e\n\u003cli\u003eSelectable relay true bypass or analog buffered bypass.\u003c\/li\u003e\n\u003cli\u003eHedra runs on \u003cstrong\u003e9V DC\u003c\/strong\u003e, center-negative, \u003cstrong\u003e2.1 mm\u003c\/strong\u003e barrel, drawing under \u003cstrong\u003e150 mA\u003c\/strong\u003e — well within range for a standard isolated pedalboard supply. A power supply is not included; battery operation is not supported.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMeris Hedra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect type\u003c\/th\u003e\n\u003ctd\u003e3-voice rhythmic pitch shifter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePitch range\u003c\/th\u003e\n\u003ctd\u003eTwo octaves down to two octaves up, diatonic or chromatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScales\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e7\u003c\/strong\u003e: Major, Minor, Melodic Minor, Harmonic Minor, Double Harmonic, Eastern Pentatonic, Minor Pentatonic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDelay modes\u003c\/th\u003e\n\u003ctd\u003eDual, Dual + Series, Series, Pitch Feedback\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax delay\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e520 ms\u003c\/strong\u003e (series modes), \u003cstrong\u003e260 ms\u003c\/strong\u003e (dual modes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePresets\u003c\/th\u003e\n\u003ctd\u003eUp to \u003cstrong\u003e16\u003c\/strong\u003e via MIDI, \u003cstrong\u003e4\u003c\/strong\u003e via Preset Switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverters \/ DSP\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24\u003c\/strong\u003e-bit A\/D and D\/A, \u003cstrong\u003e32\u003c\/strong\u003e-bit floating-point DSP, JFET input, analog dry path\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInputs\u003c\/th\u003e\n\u003ctd\u003e1 x 1\/4\" TRS (mono \/ stereo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e2 x 1\/4\" (L \/ R)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003ctd\u003eEXP jack: expression, Preset Switch, tap, MIDI over TRS; MIDI beat clock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBypass\u003c\/th\u003e\n\u003ctd\u003eSelectable relay true bypass or analog buffered bypass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, 2.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; \u003cstrong\u003e150 mA\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4.25 W x 4.5 L x 2 H in\u003c\/strong\u003e (\u003cstrong\u003e108 x 114 x 51 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e410 g\u003c\/strong\u003e (\u003cstrong\u003e14.5 oz\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw brushed aluminum with clear coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pitch voices does Hedra have?\u003c\/strong\u003e Three independently pitched voices, each with its own interval and rhythmic time division, combinable in Dual, Dual + Series, Series, or Pitch Feedback modes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I quantize the pitch shifting to a key?\u003c\/strong\u003e Yes. The Key and Scale controls keep all three voices in a chosen key and scale so shifted intervals stay musical; set Key to maximum for chromatic shifting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I recall presets without MIDI?\u003c\/strong\u003e Yes. Four presets are reachable with the Meris Preset Switch, and up to \u003cstrong\u003e16\u003c\/strong\u003e over MIDI with a MIDI-to-TRS interface such as the Meris MIDI I\/O.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Hedra work in stereo?\u003c\/strong\u003e Yes. The input can be switched to stereo over a TRS cable, and there are separate left and right outputs; Dual mode splits the delays across the stereo outputs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Hedra work on bass?\u003c\/strong\u003e Yes. Hedra shifts any instrument signal, and the headroom switch accepts both guitar\/bass and synth\/line levels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does Hedra need?\u003c\/strong\u003e \u003cstrong\u003e9V DC\u003c\/strong\u003e, center-negative, \u003cstrong\u003e2.1 mm\u003c\/strong\u003e barrel, drawing under \u003cstrong\u003e150 mA\u003c\/strong\u003e. A power supply is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I add MIDI control to Hedra?\u003c\/strong\u003e Connect a MIDI-to-TRS interface such as the Meris MIDI I\/O to Hedra's EXP jack with a TRS cable to convert standard 5-pin DIN MIDI; MIDI beat clock sync is supported.\u003c\/p\u003e","brand":"Meris","offers":[{"title":"Default Title","offer_id":43126272098557,"sku":"862539000490","price":429.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/meris-hedra-front.jpg?v=1785534488"},{"product_id":"meris-mercury7-reverb","title":"Meris Mercury7 Stereo Reverb Pedal, Ultraplate and Cathedra Algorithms, Pitch Vector, Swell","description":"\u003cp\u003eThe Meris Mercury7 blends two spacious reverb algorithms with a built-in pitch vector, turning simple chords or single notes into shimmering, off-world ambience. Its sound is inspired by the 1982 Blade Runner soundtrack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Meris Mercury7 is this?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMercury7 is the original compact two-footswitch reverb: two algorithms (Ultraplate and Cathedra), a built-in pitch vector, a Swell footswitch, stereo input and output, and no tap-tempo footswitch. If you want eight reverb algorithms, a color screen, \u003cstrong\u003e99\u003c\/strong\u003e presets across \u003cstrong\u003e33\u003c\/strong\u003e banks, native 5-pin DIN and USB-C MIDI, and a Hold Modifier switch that can be configured for tap tempo, that is the larger Meris MercuryX.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Mercury7\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo spacious reverb algorithms: Ultraplate, a lush plate with a fast build, and Cathedra, a massive, ethereal space with a slow build.\u003c\/li\u003e\n\u003cli\u003eBuilt-in pitch vector shifts the reverb tail an octave down, slightly down or up, a fifth up, or an octave up for shimmering, synth-like ambience.\u003c\/li\u003e\n\u003cli\u003eDedicated Swell footswitch engages an auto-swell envelope for volume-pedal-style pads with no extra pedal.\u003c\/li\u003e\n\u003cli\u003eStereo input and output, with input\/output headroom switchable for guitar, synth or line level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16\u003c\/strong\u003e preset locations: the first \u003cstrong\u003e4\u003c\/strong\u003e recall from the Meris Preset Switch, all \u003cstrong\u003e16\u003c\/strong\u003e over MIDI.\u003c\/li\u003e\n\u003cli\u003eTrails-enabled bypass lets the reverb tail decay naturally after you switch off.\u003c\/li\u003e\n\u003cli\u003eMIDI over the multi-function EXP jack unlocks full remote control with the Meris MIDI I\/O.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpace Decay \/ Predelay (Alt)\u003c\/strong\u003e — Sets how long the reverb tail rings out; Alt sets predelay time before the reverb onset, separating dry attack from the wash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModulate \/ Mod Speed (Alt)\u003c\/strong\u003e — Controls the depth of internal modulation inside the reverb tank; Alt sets the speed of that modulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix \/ Pitch Vector Mix (Alt)\u003c\/strong\u003e — Blends reverb with your dry signal; Alt sets how much of the pitch-shifted vector is mixed into the reverb tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLo Frequency \/ Density (Alt)\u003c\/strong\u003e — Shapes low-frequency content in the reverb tail; Alt adjusts reverb density.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Vector \/ Attack Time (Alt)\u003c\/strong\u003e — Sets the pitch interval fed into the reverb tank (octave down, slight down, slight up, fifth up, octave up); Alt sets the attack time of the swell envelope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi Frequency \/ Vibrato Depth (Alt)\u003c\/strong\u003e — Shapes high-frequency content in the tail; Alt sets vibrato depth applied within the reverb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eALT switch\u003c\/strong\u003e — Hold to reach the second-layer knob functions and to save presets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlgorithm select switch\u003c\/strong\u003e — Chooses between Ultraplate and Cathedra; its LED shows the active algorithm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwell footswitch\u003c\/strong\u003e — Press to engage the auto swell; hold to maximize Space Decay sustain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBypass footswitch\u003c\/strong\u003e — Engages or bypasses the effect.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput: 1\/4\" jack, mono or stereo TRS (selected in global settings); outputs: Left and Right 1\/4\" jacks.\u003c\/li\u003e\n\u003cli\u003eInstrument or line\/synth level setting; Kill Dry option for use in parallel effects loops.\u003c\/li\u003e\n\u003cli\u003eMulti-function EXP jack: expression pedal (controls any or all parameters), external switch (Swell), Meris 4-button Preset Switch, or MIDI In\/Out via the Meris MIDI I\/O.\u003c\/li\u003e\n\u003cli\u003ePower: \u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, 2.1 mm barrel, \u003cstrong\u003e150 mA\u003c\/strong\u003e. A power supply is not included and battery operation is not supported.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse a supply output that delivers at least \u003cstrong\u003e150 mA\u003c\/strong\u003e; isolated multi-output supplies are recommended over daisy chains, which can cause noise. With Trails enabled the reverb tail continues to ring out naturally after bypass, and most players place Mercury7 last in the chain, after drive, modulation, and delay.\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMeris Mercury7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect type\u003c\/th\u003e\n\u003ctd\u003eStereo algorithmic reverb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlgorithms\u003c\/th\u003e\n\u003ctd\u003eUltraplate, Cathedra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopology\u003c\/th\u003e\n\u003ctd\u003eDigital (24-bit A\/D and D\/A, 32-bit floating-point DSP, \u003cstrong\u003e48 kHz\u003c\/strong\u003e) with analog dry path\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAudio I\/O\u003c\/th\u003e\n\u003ctd\u003eMono or stereo (TRS) input, stereo L\/R outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e1 MΩ\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax input level\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e+9 dBu\u003c\/strong\u003e (Instrument), \u003cstrong\u003e+12.5 dBu\u003c\/strong\u003e (Line\/Synth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e20 Hz – 20 kHz\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal-to-noise ratio\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e115 dB\u003c\/strong\u003e typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBypass\u003c\/th\u003e\n\u003ctd\u003eSelectable relay true bypass or analog buffered bypass; Trails option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePresets\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e16\u003c\/strong\u003e (1–4 via Preset Switch, 1–16 via MIDI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpression \/ MIDI\u003c\/th\u003e\n\u003ctd\u003eMulti-function TRS EXP jack (expression, external switch, preset switch, MIDI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTap tempo\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, 2.1 mm, \u003cstrong\u003e150 mA\u003c\/strong\u003e (supply not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4.25 × 4.5 × 2 in\u003c\/strong\u003e (\u003cstrong\u003e108 × 114 × 51 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e14.6 oz\u003c\/strong\u003e (\u003cstrong\u003e414 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade in\u003c\/th\u003e\n\u003ctd\u003eDesigned and built in California, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Mercury7 have a tap-tempo footswitch?\u003c\/strong\u003e No. Mercury7's two footswitches are dedicated to Swell and Bypass, and the EXP jack's external-switch mode controls Swell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Mercury7 stereo?\u003c\/strong\u003e Yes. It has a TRS input that can be set to mono or stereo and separate Left and Right outputs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between Mercury7 and MercuryX?\u003c\/strong\u003e Mercury7 is a compact 6-knob, two-footswitch reverb with two algorithms and 16 presets. MercuryX keeps Ultraplate and Cathedra and adds six more algorithms (eight in total), a color screen, 2.54 seconds of stereo predelay, Freeze, 99 presets and native 5-pin DIN and USB-C MIDI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do the two algorithms sound like?\u003c\/strong\u003e Ultraplate is a lush plate with a fast build; Cathedra is a massive, ethereal space with a slow build.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I recall presets without MIDI?\u003c\/strong\u003e Yes. The first four of Mercury7's 16 presets are reachable with the Meris Preset Switch, and all 16 over MIDI with the Meris MIDI I\/O.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Mercury7 have trails?\u003c\/strong\u003e Yes. A global Trails setting lets the reverb tail decay naturally after bypass instead of cutting off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does Mercury7 need?\u003c\/strong\u003e \u003cstrong\u003e9V DC, center-negative\u003c\/strong\u003e, 2.1 mm barrel, \u003cstrong\u003e150 mA\u003c\/strong\u003e. A power supply is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it with synths or keyboards?\u003c\/strong\u003e Yes. The input can be set to line\/synth level, which raises maximum input to +12.5 dBu.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I add MIDI control to Mercury7?\u003c\/strong\u003e Set the EXP jack to MIDI mode in the global settings and connect a Meris MIDI I\/O with a TRS cable to convert standard 5-pin DIN MIDI.\u003c\/p\u003e","brand":"Meris","offers":[{"title":"Default Title","offer_id":43126285402365,"sku":"862539000414","price":429.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/meris-mercury7-front.jpg?v=1785534488"},{"product_id":"meris-polymoon-super-modulated-multiple-tap-delay","title":"Meris Polymoon Super-Modulated Multi-Tap Delay Pedal, Stereo, Phaser and Flanger, Tap Tempo","description":"\u003cp\u003eThe Meris Polymoon stacks a \u003cstrong\u003e1200 ms\u003c\/strong\u003e multiple-tap delay with six custom LFOs, a tempo-syncable barberpole phaser, and a dynamic flanger for tidal, dream-state soundscapes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Meris Polymoon is this?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePolymoon is a fixed-architecture 1200 ms super-modulated multi-tap delay with six knobs, two footswitches, and 16 presets, inspired by cascaded rack gear. Its signal flows through parallel dynamic flangers, six serial multi-tap delays, and a pair of barberpole phasers, one per stereo side. Meris's larger LVX modular delay system shares many processing elements with Polymoon but does not fully replicate its engine, and the two pair well on the same board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Polymoon\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUp to 1200 ms of multi-tap delay creates dense, evolving echo textures beyond a standard single-tap delay.\u003c\/li\u003e\n\u003cli\u003eSix custom LFOs continuously modulate the delay taps for tidal, ever-shifting movement.\u003c\/li\u003e\n\u003cli\u003eTempo-syncable barberpole phaser and dynamic flanger add swirling motion without extra pedals.\u003c\/li\u003e\n\u003cli\u003e16 onboard presets store your favorite modulated-delay soundscapes for instant recall.\u003c\/li\u003e\n\u003cli\u003eTrails-enabled bypass lets delay and modulation tails ring out naturally after you switch off.\u003c\/li\u003e\n\u003cli\u003eMIDI over the multi-function EXP jack unlocks full remote control with the Meris MIDI I\/O.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime \/ Early Modulation (Alt)\u003c\/strong\u003e — Sets the base delay time up to 1200 ms and the synced phaser speed; Alt sets the depth of triangle-wave modulation applied to the early delay taps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeedback \/ Feedback Filter (Alt)\u003c\/strong\u003e — Controls how many times delay repeats feed back into themselves; Alt tilts an EQ filter inside the feedback path — noon is flat, lower is darker, higher is brighter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix \/ Delay Level (Alt)\u003c\/strong\u003e — Blends delay with dry signal; Alt trims delay output level from 0 dB down to -12 dB, with automatic level scaling at minimum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiply \/ Late Modulation (Alt)\u003c\/strong\u003e — Sets how many delay taps are added to the output for denser repeats; Alt sets modulation depth applied to later taps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension \/ Dynamic Flanger Mode (Alt)\u003c\/strong\u003e — Smears and sustains reflections for added dimension; Alt selects the Dynamic Flanger's response mode — Envelope Down, Envelope Up, or LFO.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamics \/ Dynamic Flanger Speed (Alt)\u003c\/strong\u003e — Sets the intensity of the stereo dynamic flanger (off at minimum); Alt sets the flanger's envelope attack time or LFO speed, depending on mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlt button\u003c\/strong\u003e — Hold to access the Alt functions of the knobs and footswitches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser select button\u003c\/strong\u003e — Chooses Slow (fixed 0.1 Hz), Sync (locked to a quarter note of the delay time), or Slow + Sync (locked to a whole note) for the built-in barberpole phaser, or turns it off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap footswitch \/ Dotted Eighth (Alt)\u003c\/strong\u003e — Taps in delay and synced phaser time; hold for half-speed delay. Alt switches the tapped subdivision from quarter notes to dotted eighth notes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBypass footswitch \/ Dynamic Flanger Feedback (Alt)\u003c\/strong\u003e — Engages or bypasses the effect; Alt sets feedback amount for the Dynamic Flanger.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStereo input (switchable mono\/stereo, TRS) and left\/right outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable input\/output headroom for guitar, synth, or line levels\u003c\/li\u003e\n\u003cli\u003eMulti-function EXP jack: expression pedal (controls all parameters at once, morphing between toe-up and toe-down settings), external tap switch, Meris Preset Switch, or MIDI through the Meris MIDI I\/O\u003c\/li\u003e\n\u003cli\u003eMIDI CC control, MIDI beat clock sync, and SysEx preset backup via the MIDI I\/O\u003c\/li\u003e\n\u003cli\u003ePower: \u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, 2.1 mm barrel, under \u003cstrong\u003e150 mA\u003c\/strong\u003e — no battery; power supply not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBypass is selectable between relay true bypass and analog buffered bypass, set in the global configuration. With Trails enabled, delay and modulation trails ring out naturally after bypass; a Glide option keeps the delay buffer running between presets for smooth transitions. Most players place Polymoon last or near-last in the chain, after drive and modulation. For instant preset recall without a computer, pair it with the Meris Preset Switch; for full MIDI control, use the Meris MIDI I\/O.\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMeris Polymoon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect type\u003c\/th\u003e\n\u003ctd\u003eSuper-modulated multiple-tap delay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDelay time\u003c\/th\u003e\n\u003ctd\u003eUp to \u003cstrong\u003e1200 ms\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModulation\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e6\u003c\/strong\u003e LFOs, stereo barberpole phaser, stereo dynamic flanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopology\u003c\/th\u003e\n\u003ctd\u003eDigital, \u003cstrong\u003e24\u003c\/strong\u003e-bit A\/D and D\/A, \u003cstrong\u003e32\u003c\/strong\u003e-bit floating-point DSP; analog dry path\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStereo\u003c\/th\u003e\n\u003ctd\u003eStereo in (switchable mono\/stereo), stereo out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBypass\u003c\/th\u003e\n\u003ctd\u003eSelectable relay true bypass or analog buffered bypass; Trails option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePresets\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e16\u003c\/strong\u003e (1–4 via Preset Switch, 1–16 via MIDI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpression \/ MIDI\u003c\/th\u003e\n\u003ctd\u003eMulti-function TRS EXP jack (expression, tap, Preset Switch, MIDI via MIDI I\/O)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTap tempo\u003c\/th\u003e\n\u003ctd\u003eYes, onboard footswitch (quarter or dotted eighth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, 2.1 mm, under \u003cstrong\u003e150 mA\u003c\/strong\u003e (supply not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBattery\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4.25 × 4.5 × 2 in\u003c\/strong\u003e (\u003cstrong\u003e108 × 114 × 51 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e14.5 oz\u003c\/strong\u003e (\u003cstrong\u003e410 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eWhite powder coat with fine iridescent flake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade in\u003c\/th\u003e\n\u003ctd\u003eCalifornia, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the delay?\u003c\/strong\u003e A 1200 ms real-time selectable multiple-tap delay line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Multiply do?\u003c\/strong\u003e It sets how many delay taps are added to the output for denser, more layered repeats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many LFOs does Polymoon have?\u003c\/strong\u003e Six custom-tuned LFOs with adjustable waveforms, split into separate Early and Late Modulation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat phaser modes are available?\u003c\/strong\u003e Slow (fixed 0.1 Hz stereo barberpole), Sync (locked to a quarter note of the delay time), and Slow + Sync (locked to a whole note), or off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Polymoon stereo?\u003c\/strong\u003e Yes. The input switches between mono and stereo, and there are separate left and right outputs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the delays ring out when I switch it off?\u003c\/strong\u003e Yes, with the Trails option enabled in the global settings, repeats decay naturally after bypass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between Polymoon and LVX?\u003c\/strong\u003e Polymoon is a fixed 1200 ms multi-tap delay engine in a compact two-footswitch pedal. LVX is Meris's larger modular delay system with a color screen and 99 presets; it shares processing elements with Polymoon but cannot fully replicate its engine, so the two pair well together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I recall presets without MIDI?\u003c\/strong\u003e Yes. The first four of Polymoon's 16 presets are reachable with the Meris Preset Switch, and all 16 over MIDI with the Meris MIDI I\/O.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does Polymoon need?\u003c\/strong\u003e 9V DC, center-negative, 2.1 mm barrel, drawing under 150 mA. A power supply is not included.\u003c\/p\u003e","brand":"Meris","offers":[{"title":"Default Title","offer_id":43126315516157,"sku":"862539000452","price":429.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/meris-polymoon-front.jpg?v=1785534488"},{"product_id":"meris-midi-i-o","title":"Meris MIDI I\/O Interface, 5-Pin DIN to TRS MIDI for up to 4 Meris Pedals","description":"\u003cp\u003eThe Meris MIDI I\/O converts standard 5-pin DIN MIDI to the TRS MIDI that Meris's compact two-footswitch pedals use, unlocking full MIDI parameter control, all \u003cstrong\u003e16\u003c\/strong\u003e internal presets, and offline preset backup on up to \u003cstrong\u003e4\u003c\/strong\u003e pedals at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe MIDI I\/O is a compact, pedalboard-friendly interface that sits between a standard 5-pin DIN MIDI source — a controller, a DAW, or a computer — and the TRS EXP jack on a Meris two-footswitch pedal. Because the MIDI standard calls for active opto-isolator electronics, Meris recommends this box over a passive MIDI-to-TRS cable, which can suffer grounding issues, latency, or unreliable operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade for the Meris Enzo, Hedra, Mercury7, Ottobit Jr. and Polymoon — the compact pedals whose EXP jack can be set to MIDI mode in the global settings. One MIDI I\/O controls up to \u003cstrong\u003e4\u003c\/strong\u003e Meris pedals, passing MIDI from the output of one pedal to the input of the next. It is not needed for LVX, MercuryX, Enzo X, or Ottobit X, which have their own built-in 5-pin DIN and USB-C MIDI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy players choose it\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFull MIDI CC control over every knob, switch, mode and expression setting on a connected pedal, not just preset recall\u003c\/li\u003e\n\u003cli\u003eProgram Change \u003cstrong\u003e1–16\u003c\/strong\u003e selects and enables presets 1–16 (the 4-button Preset Switch reaches only presets 1–4); Program Change 0 bypasses the pedal\u003c\/li\u003e\n\u003cli\u003eUnlimited offline preset saving and loading over SysEx, for backing up or sharing patches\u003c\/li\u003e\n\u003cli\u003eGive each pedal its own MIDI channel (1–16 or Omni) to control several pedals individually\u003c\/li\u003e\n\u003cli\u003eMIDI in\/out activity status LEDs so you can confirm a connection at a glance\u003c\/li\u003e\n\u003cli\u003eWireless operation possible with a separately sold Bluetooth MIDI adapter (Yamaha MD-BT01)\u003c\/li\u003e\n\u003cli\u003eWorks out of the box with Empress pedals; Chase Bliss pedals need a custom cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5-pin DIN MIDI In and MIDI Out for your controller, DAW interface or computer\u003c\/li\u003e\n\u003cli\u003eTRS connection to each pedal's EXP jack (set the pedal's EXP mode to MIDI)\u003c\/li\u003e\n\u003cli\u003ePower: \u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, 2.1 mm barrel, \u003cstrong\u003e10 mA\u003c\/strong\u003e — any standard isolated pedalboard supply output easily covers it\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeris MIDI I\/O\u003c\/li\u003e\n\u003cli\u003eOne flat \u003cstrong\u003e11-inch\u003c\/strong\u003e TRS cable (connect additional pedals with your own TRS cables)\u003c\/li\u003e\n\u003cli\u003ePower supply not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003e5-pin DIN to TRS MIDI interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePedals controlled\u003c\/th\u003e\n\u003ctd\u003eUp to \u003cstrong\u003e4\u003c\/strong\u003e Meris pedals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e5-pin DIN MIDI In and Out; TRS MIDI to pedal EXP jacks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIndicators\u003c\/th\u003e\n\u003ctd\u003eMIDI In and MIDI Out activity LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, 2.1 mm, \u003cstrong\u003e10 mA\u003c\/strong\u003e (supply not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003eFlat \u003cstrong\u003e11 in\u003c\/strong\u003e TRS cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.7 × 2.6 × 1.5 in\u003c\/strong\u003e (\u003cstrong\u003e94 × 66 × 38 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e6.4 oz\u003c\/strong\u003e (\u003cstrong\u003e181 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pedals does the MIDI I\/O work with?\u003c\/strong\u003e The Meris Enzo, Hedra, Mercury7, Ottobit Jr. and Polymoon. LVX, MercuryX, Enzo X and Ottobit X have their own built-in MIDI and do not need it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pedals can one MIDI I\/O control?\u003c\/strong\u003e Up to four Meris pedals, with MIDI passed from the output of one pedal to the input of the next. Give each pedal its own MIDI channel to control them separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it unlock all 16 presets?\u003c\/strong\u003e Yes. Program Change 1–16 selects presets 1–16 on a compatible pedal; Program Change 0 bypasses it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do I need to set on the pedal?\u003c\/strong\u003e Set the pedal's EXP jack to MIDI mode in its global settings, then connect it to the MIDI I\/O with a TRS cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy not use a simple MIDI-to-TRS cable instead?\u003c\/strong\u003e The MIDI standard requires active opto-isolator electronics; passive cables can cause grounding issues, latency, or unreliable operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it go wireless?\u003c\/strong\u003e Yes, with a separately sold Bluetooth MIDI adapter (Yamaha MD-BT01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power does it need?\u003c\/strong\u003e \u003cstrong\u003e9V DC, center-negative\u003c\/strong\u003e, 2.1 mm barrel, about \u003cstrong\u003e10 mA\u003c\/strong\u003e. A power supply is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it work with non-Meris pedals?\u003c\/strong\u003e Most pedals using TRS MIDI are compatible: Empress works out of the box, and Chase Bliss needs a custom cable. Check each pedal's manual to confirm how it passes MIDI.\u003c\/p\u003e","brand":"Meris","offers":[{"title":"Default Title","offer_id":43126354084093,"sku":"862539000469","price":129.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/meris-midi-io-top-label.jpg?v=1785534488"},{"product_id":"meris-preset-switch","title":"Meris Preset Switch, 4-Button Preset Footswitch for Meris Pedals, No Power Required","description":"\u003cp\u003eThe Meris Preset Switch is a compact 4-button footswitch that gives instant, no-MIDI-required access to the first four presets on a compatible Meris pedal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Preset Switch connects to a compatible Meris pedal's EXP jack with a single TRS cable and gives instantaneous, one-press access to that pedal's first four presets — no external power and no MIDI rig required. Footswitch 1 recalls preset 1, footswitch 2 recalls preset 2, and so on. To save a preset, press the desired footswitch on the Preset Switch, dial in the sound on the pedal, then hold the pedal's ALT button.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade for Meris's compact two-footswitch pedals with a multi-function EXP jack: Enzo, Hedra, Mercury7, Ottobit Jr., and Polymoon. The pedal's EXP jack must be set to \"PRESET\" in its global configuration mode. LVX, MercuryX, Enzo X, and Ottobit X select presets from their own footswitches and 5-pin DIN MIDI instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy players choose it\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInstantaneous access to \u003cstrong\u003e4\u003c\/strong\u003e presets with a single footswitch press each\u003c\/li\u003e\n\u003cli\u003eNo external power required\u003c\/li\u003e\n\u003cli\u003eConnects with a single included TRS cable\u003c\/li\u003e\n\u003cli\u003eCan drive multiple compatible pedals at once with a TRS Y cable (not included) that joins tip, ring and sleeve in parallel; each footswitch then recalls the same-numbered preset on every connected pedal\u003c\/li\u003e\n\u003cli\u003eSized to sit aesthetically in front of two Meris two-footswitch pedals\u003c\/li\u003e\n\u003cli\u003ePCB socket for an optional DIY mini-Arduino MIDI project (Arduino not included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSetup\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHold the pedal's ALT switch while powering it on for about 3 seconds; the front-panel LEDs blink 3 times to confirm configuration mode\u003c\/li\u003e\n\u003cli\u003eUse the knob shown in your pedal's quick start guide (bottom row, rightmost) to set the EXP jack to PRESET\u003c\/li\u003e\n\u003cli\u003eUnplug the pedal to store the setting\u003c\/li\u003e\n\u003cli\u003eConnect the Preset Switch to the EXP jack with the included TRS cable and power the pedal as usual\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeris Preset Switch\u003c\/li\u003e\n\u003cli\u003eOne flat \u003cstrong\u003e11-inch\u003c\/strong\u003e TRS cable\u003c\/li\u003e\n\u003cli\u003eA TRS Y cable, needed only to drive more than one pedal, is not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003e4-button preset footswitch for Meris pedals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePresets\u003c\/th\u003e\n\u003ctd\u003eRecalls presets \u003cstrong\u003e1–4\u003c\/strong\u003e of the connected pedal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eTRS to the pedal's EXP jack (EXP mode set to PRESET)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eNone required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eEnzo, Hedra, Mercury7, Ottobit Jr., Polymoon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003eFlat \u003cstrong\u003e11 in\u003c\/strong\u003e TRS cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8.5 × 2.25 × 2 in\u003c\/strong\u003e (\u003cstrong\u003e216 × 57 × 51 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e10 oz\u003c\/strong\u003e (\u003cstrong\u003e285 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pedals does the Preset Switch work with?\u003c\/strong\u003e The Meris Enzo, Hedra, Mercury7, Ottobit Jr., and Polymoon — the compact pedals with a multi-function EXP jack. LVX, MercuryX, Enzo X, and Ottobit X handle presets on their own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many presets can it reach?\u003c\/strong\u003e The first four presets of the connected pedal. All 16 presets of a compact Meris pedal are available over MIDI with the Meris MIDI I\/O.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I save a preset from the Preset Switch?\u003c\/strong\u003e Press the desired footswitch on the Preset Switch, adjust the sound to taste on the pedal, then hold the pedal's ALT button to store it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it need power?\u003c\/strong\u003e No external power is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan one Preset Switch drive more than one pedal?\u003c\/strong\u003e Yes, with a TRS Y cable that connects the tips, rings and sleeves in parallel (not included), with every connected pedal's EXP jack set to PRESET mode. Each footswitch recalls the same-numbered preset on all connected pedals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat setup is needed on the pedal?\u003c\/strong\u003e Set the pedal's EXP jack to \"PRESET\" in its global configuration mode, then power cycle to store the setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The Preset Switch and one flat 11-inch TRS cable.\u003c\/p\u003e","brand":"Meris","offers":[{"title":"Default Title","offer_id":43126365815037,"sku":"862539000476","price":139.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/meris-preset-switch-front-straight.jpg?v=1785534488"},{"product_id":"t-rex-moller-2-overdrive-with-boost","title":"T-Rex Moller 2 Overdrive Pedal with 0–20 dB Clean Boost, Mix Control, Bass Boost Switch","description":"\u003cp\u003eAn overdrive plus dedicated clean boost in one enclosure — the Moller 2 delivers T-Rex's classic bluesy, dynamic overdrive with a switchable boost that pushes leads over the top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich T-Rex Moller is this?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Møller 2 is the updated version of T-Rex's overdrive named after Danish guitarist Knud Møller. It keeps the original's classic bluesy overdrive — dynamic tones with just a little dirt around the edges — and adds a Mix control, a sturdier Bass Boost toggle and easier-to-read knob graphics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose this pedal\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo stages — Overdrive plus dedicated Clean Boost — controlled by separate footswitches.\u003c\/li\u003e\n\u003cli\u003eWarm, dynamic breakup that responds to your picking.\u003c\/li\u003e\n\u003cli\u003eMix control blends clean signal back in with the overdrive for clarity and punch.\u003c\/li\u003e\n\u003cli\u003eClean Boost adds \u003cstrong\u003e0–20 dB\u003c\/strong\u003e and sets a solo level whether or not the overdrive is engaged.\u003c\/li\u003e\n\u003cli\u003eBass Boost toggle for extra low end.\u003c\/li\u003e\n\u003cli\u003e9V DC operation, with a 9V battery option.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTone — broad tone control across a wide range of frequencies.\u003c\/li\u003e\n\u003cli\u003eGain — how hard the overdrive stage clips.\u003c\/li\u003e\n\u003cli\u003eMix — balance between distorted and clean signal; lower settings let more clean signal through.\u003c\/li\u003e\n\u003cli\u003eLevel — master output volume.\u003c\/li\u003e\n\u003cli\u003eBoost — clean boost level, \u003cstrong\u003e0–20 dB\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eBass Boost toggle — adds low-end weight.\u003c\/li\u003e\n\u003cli\u003eOn\/Off footswitch — engages the overdrive.\u003c\/li\u003e\n\u003cli\u003eBoost On\/Off footswitch — engages the clean boost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMono input and output jacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e, center-negative; accepts \u003cstrong\u003e8.5–12.5V DC\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eCurrent draw \u003cstrong\u003e16 mA\u003c\/strong\u003e — a trivial load on any isolated supply.\u003c\/li\u003e\n\u003cli\u003e9V (6F22) battery capable — battery life \u003cstrong\u003e5–8 hours\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003cli\u003eWorks especially well early in the chain (guitar → tuner → Moller 2 → modulation → delay\/reverb → amp).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eT-Rex Møller 2 Overdrive with Clean Boost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect type\u003c\/th\u003e\n\u003ctd\u003eOverdrive + clean boost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCircuit\u003c\/th\u003e\n\u003ctd\u003eAnalog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControls\u003c\/th\u003e\n\u003ctd\u003eTone, Gain, Mix, Level, Boost, Bass Boost toggle, On\/Off and Boost On\/Off footswitches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoost range\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e0–20 dB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; \u003cstrong\u003e1 MΩ\u003c\/strong\u003e at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput impedance\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; \u003cstrong\u003e1 kΩ\u003c\/strong\u003e at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax input level\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e2.5 Vp-p\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative (\u003cstrong\u003e8.5–12.5V\u003c\/strong\u003e) or 9V battery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e16 mA\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBattery life\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e5–8 hours\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (incl. knobs)\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4.7 × 3.9 × 2.2 in\u003c\/strong\u003e (\u003cstrong\u003e120 × 100 × 55 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e12.2 oz\u003c\/strong\u003e (\u003cstrong\u003e345 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of overdrive is the Moller 2?\u003c\/strong\u003e A classic bluesy overdrive with dynamic response rather than a voicing of a specific amp. The Mix control lets you keep more of your clean signal in the sound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the boost on its own for a cleaner solo bump?\u003c\/strong\u003e Yes — the two footswitches are independent, so you can run only the clean boost (up to 20 dB), only the overdrive, or both together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Mix knob do?\u003c\/strong\u003e It balances distorted and clean signal. Turn it down to let more of the clean guitar through for clarity, up for full overdrive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bass Boost switch do?\u003c\/strong\u003e It is a toggle that adds low-end weight to the overdrive — useful with thin-sounding single-coils or small amps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBattery life?\u003c\/strong\u003e Around \u003cstrong\u003e5–8 hours\u003c\/strong\u003e from a 9V battery. Unplug the input jack when not in use to avoid draining the battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty?\u003c\/strong\u003e 2-year manufacturer warranty.\u003c\/p\u003e","brand":"T-Rex","offers":[{"title":"Default Title","offer_id":43126418211069,"sku":"811059010342","price":149.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/t-rex-moller-2-front.jpg?v=1785529038"},{"product_id":"t-rex-mudhoney-distortion","title":"T-Rex Mudhoney Distortion Pedal (Danish Collection), Gain Boost Switch, True Bypass","description":"\u003cp\u003eThe yellow one: the Danish Collection Mudhoney reproduces the circuit of the original T-Rex Mudhoney, first hand-built in \u003cstrong\u003e1998\u003c\/strong\u003e — a single-channel analog distortion with a punchy, mid-forward voice and a Boost switch that takes it from natural rock grit to a thick, fuzz-like high-gain sound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich T-Rex Mudhoney is this?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the Mudhoney Distortion (Danish Collection) — the original single-channel circuit in its mellow-yellow finish, built with selected parts chosen to match or surpass the old ones in quality and sound. The Mudhoney II is a separate, later pedal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose this pedal\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe original Mudhoney recipe — the pedal that made the Mudhoney name.\u003c\/li\u003e\n\u003cli\u003eRich, mid-forward distortion voice that cuts through a band mix.\u003c\/li\u003e\n\u003cli\u003eBoost switch moves the circuit from moderate gain to high gain, where it starts to resemble a fuzz.\u003c\/li\u003e\n\u003cli\u003eTrue bypass and a very low \u003cstrong\u003e6 mA\u003c\/strong\u003e current draw for pedalboard-friendly integration.\u003c\/li\u003e\n\u003cli\u003e9 V DC or 9 V battery — road-ready anywhere.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain\u003c\/strong\u003e — sets the amount of distortion, working together with the Boost switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTone\u003c\/strong\u003e — adjusts the high\/treble frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel\u003c\/strong\u003e — output volume; past 12 o'clock it raises the level above the bypassed signal, by roughly \u003cstrong\u003e15 dB\u003c\/strong\u003e at maximum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoost (mode) switch\u003c\/strong\u003e — illuminated toggle that sets the overall distortion range from moderate to high gain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootswitch\u003c\/strong\u003e — engages the distortion; an LED shows the effect status.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" input and 1\/4\" output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, 2.1 mm barrel; operating range \u003cstrong\u003e8–12.5 V DC\u003c\/strong\u003e. Power supply not included.\u003c\/li\u003e\n\u003cli\u003eCurrent draw \u003cstrong\u003e6 mA\u003c\/strong\u003e at 9 V — a negligible load for any supply.\u003c\/li\u003e\n\u003cli\u003eRuns on a 9 V (6F22) battery for about \u003cstrong\u003e14–18 hours\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eTrue bypass — place it after buffers\/tuners and before modulation and time-based effects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eT-Rex Mudhoney Distortion (Danish Collection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect type\u003c\/th\u003e\n\u003ctd\u003eSingle-channel analog distortion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControls\u003c\/th\u003e\n\u003ctd\u003eGain, Tone, Level, Boost (mode) switch, on\/off footswitch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBypass\u003c\/th\u003e\n\u003ctd\u003eTrue bypass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; \u003cstrong\u003e1 MΩ\u003c\/strong\u003e (at 1 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput impedance\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; \u003cstrong\u003e1 kΩ\u003c\/strong\u003e (at 1 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum input signal\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e1.5 Vp-p\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, 2.1 mm barrel (\u003cstrong\u003e8–12.5 V DC\u003c\/strong\u003e) or 9 V battery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e6 mA\u003c\/strong\u003e at 9 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBattery life\u003c\/th\u003e\n\u003ctd\u003eapprox. \u003cstrong\u003e14–18 hours\u003c\/strong\u003e (9 V 6F22)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W × H × D, incl. knobs)\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.9 × 2.2 × 4.7 in\u003c\/strong\u003e (\u003cstrong\u003e100 × 55 × 120 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e12.3 oz\u003c\/strong\u003e (\u003cstrong\u003e350 g\u003c\/strong\u003e), without battery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e2 years\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the original Mudhoney?\u003c\/strong\u003e Yes — the Danish Collection Mudhoney reproduces the original single-channel Mudhoney circuit first built in 1998. The Mudhoney II is a different, later pedal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Boost switch do?\u003c\/strong\u003e It sets the distortion range: off for moderate, natural rock grit; on for high gain with a fuzzier edge. The Gain knob then fine-tunes the amount within that range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrue bypass or buffered?\u003c\/strong\u003e True bypass. The pedal is out of your signal path when it is off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power does it need?\u003c\/strong\u003e 9 V DC, center-negative, 2.1 mm barrel (it accepts 8–12.5 V DC). It draws only 6 mA. A power supply is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it run on a battery?\u003c\/strong\u003e Yes — a 9 V battery lasts about 14–18 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty?\u003c\/strong\u003e T-Rex offers a 2-year warranty on its products.\u003c\/p\u003e","brand":"T-Rex","offers":[{"title":"Default Title","offer_id":43126431351037,"sku":"811059010403","price":149.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/t-rex-mudhoney-danish-front.jpg?v=1785529044"},{"product_id":"t-rex-fuel-tank-chameleon-power-supply","title":"T-Rex Fuel Tank Chameleon Isolated Pedal Power Supply, 6 Outputs, 9\/12\/18V DC and 12V AC","description":"\u003cp\u003eA six-output, multi-voltage isolated power supply built for real pedalboards — the Fuel Tank Chameleon delivers 9V DC, 12V DC and 18V DC plus a 12V AC option, with five outputs usable at the same time, all from a single road-worthy enclosure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose this power supply\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSix isolated outputs, five usable at the same time — every pedal gets its own feed with no shared-ground hum.\u003c\/li\u003e\n\u003cli\u003eMulti-voltage — 9V DC, 12V DC, 18V DC and 12V AC from one brick to handle a mixed pedalboard.\u003c\/li\u003e\n\u003cli\u003eSwitchable \u003cstrong\u003e115V \/ 230V\u003c\/strong\u003e AC input — supports North American and European mains without a step-down transformer.\u003c\/li\u003e\n\u003cli\u003eGalvanically isolated outputs — a fault on one circuit will not pull down the others.\u003c\/li\u003e\n\u003cli\u003eTraditional EI transformer inside (not switch-mode) — designed for low noise on high-gain and vintage-style pedals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOutput configuration\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutputs 1–3 supply 9V DC or 12V DC at \u003cstrong\u003e300 mA\u003c\/strong\u003e each — sized for most stompboxes (fuzz, overdrive, EQ, tuner, small delays).\u003c\/li\u003e\n\u003cli\u003eOutput 4 switches to \u003cstrong\u003e18V DC\u003c\/strong\u003e, where it delivers \u003cstrong\u003e150 mA\u003c\/strong\u003e, for pedals that run at 18V.\u003c\/li\u003e\n\u003cli\u003eOutputs 5 and 6 are alternatives — 9V\/12V DC or 12V AC, one at a time, not both; the choice is made with a small DIP switch.\u003c\/li\u003e\n\u003cli\u003eFive outputs run at once at \u003cstrong\u003e300 mA\u003c\/strong\u003e each, for \u003cstrong\u003e1500 mA\u003c\/strong\u003e in total. Each outlet has its own limit (current is not shared between outputs), and a current-doubler cable (sold separately) can combine two identical outputs for up to \u003cstrong\u003e600 mA\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eAll outlets are center-negative — standard Boss polarity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowers a mixed pedalboard of up to five pedals at once, analog and digital.\u003c\/li\u003e\n\u003cli\u003eIsolated design eliminates the ground-loop hum common with daisy-chain adapters.\u003c\/li\u003e\n\u003cli\u003e18V output for pedals with an 18V headroom option (many boosts, overdrives and preamps).\u003c\/li\u003e\n\u003cli\u003e12V AC output for pedals that specifically call for 12V AC — check your pedal's power requirements before selecting AC.\u003c\/li\u003e\n\u003cli\u003eIncluded polarity inverter and mini-jack cables cover center-positive pedals and pedals with 3.5 mm power jacks.\u003c\/li\u003e\n\u003cli\u003eFor the lowest noise, mount the supply as far from your pedals as practical, ideally at the end of the board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel Tank Chameleon power supply\u003c\/li\u003e\n\u003cli\u003eRegion-specific mains power cable (detachable IEC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\u003c\/strong\u003e × red AC cable, 2.1 mm to 2.5 mm, for the 12V AC outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\u003c\/strong\u003e × orange polarity inverter cable, 2.1 mm plug to 2.1 mm socket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\u003c\/strong\u003e × black DC cable, 2.1 mm to 3.5 mm mini-jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8\u003c\/strong\u003e × black 2.1 mm DC cables: \u003cstrong\u003e2\u003c\/strong\u003e × 20 cm, \u003cstrong\u003e4\u003c\/strong\u003e × 50 cm, \u003cstrong\u003e1\u003c\/strong\u003e × 75 cm, \u003cstrong\u003e1\u003c\/strong\u003e × 100 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eT-Rex Fuel Tank Chameleon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eIsolated multi-voltage pedalboard power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of outputs\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e6\u003c\/strong\u003e isolated outputs (\u003cstrong\u003e5\u003c\/strong\u003e usable simultaneously)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs 1–3\u003c\/th\u003e\n\u003ctd\u003e9V or 12V DC, \u003cstrong\u003e300 mA\u003c\/strong\u003e each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput 4\u003c\/th\u003e\n\u003ctd\u003eswitchable to \u003cstrong\u003e18V DC\u003c\/strong\u003e, \u003cstrong\u003e150 mA\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput 5 \/ 6\u003c\/th\u003e\n\u003ctd\u003e9V\/12V DC or \u003cstrong\u003e12V AC\u003c\/strong\u003e (one at a time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal output capacity\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1500 mA\u003c\/strong\u003e (5 × 300 mA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent doubling\u003c\/th\u003e\n\u003ctd\u003eup to \u003cstrong\u003e600 mA\u003c\/strong\u003e with a doubler cable (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector polarity\u003c\/th\u003e\n\u003ctd\u003eCenter-negative, all outlets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIsolation\u003c\/th\u003e\n\u003ctd\u003eGalvanically isolated outputs, EI transformer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMains input\u003c\/th\u003e\n\u003ctd\u003eSwitchable \u003cstrong\u003e115V \/ 230V\u003c\/strong\u003e, detachable IEC cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003emax. \u003cstrong\u003e40 W\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFuse\u003c\/th\u003e\n\u003ctd\u003eT315mA\/250V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W × D × H)\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e6.3 × 3.2 × 1.5 in\u003c\/strong\u003e (\u003cstrong\u003e160 × 80 × 38 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e27.9 oz\u003c\/strong\u003e (\u003cstrong\u003e790 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current does each output supply?\u003c\/strong\u003e Every 9V DC \/ 12V DC outlet supplies \u003cstrong\u003e300 mA\u003c\/strong\u003e, with five outputs running at once for 1500 mA in total. Current is not shared, so an unused outlet does not add capacity to another; for a pedal that needs more, a current-doubler cable combines two outputs for up to \u003cstrong\u003e600 mA\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 12V AC output work?\u003c\/strong\u003e Output 5\/6 can be set to 12V AC as an alternative to 9V\/12V DC. Use the included red AC cable, and only connect pedals that specifically require 12V AC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it truly isolated?\u003c\/strong\u003e Yes — the outputs are galvanically isolated from a traditional EI transformer, so a noisy pedal will not inject hum into your other pedals via a shared ground.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it work internationally?\u003c\/strong\u003e The mains input switches between 115V and 230V, and the mains cable is a standard detachable IEC lead. Set the voltage switch before plugging in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it with 18V pedals?\u003c\/strong\u003e Yes — outlet 4 switches to 18V DC at 150 mA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I power a center-positive pedal?\u003c\/strong\u003e Yes — use the included orange polarity inverter cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty?\u003c\/strong\u003e 2-year manufacturer warranty.\u003c\/p\u003e","brand":"T-Rex","offers":[{"title":"PSU","offer_id":43472554623229,"sku":"811059013343","price":159.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/t-rex-fuel-tank-chameleon-front-outputs.jpg?v=1785529058"},{"product_id":"meris-mercury7-alt-function-overlay","title":"Meris Mercury7 Alt Function Overlay v2, Clear Static-Cling Vinyl Control Guide","description":"\u003cp\u003eThis clear vinyl overlay labels the hidden Alt-layer functions on your Mercury7's knobs directly on the pedal face, so you can read the second parameter at a glance without memorizing it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach Mercury7 knob does double duty: a primary function on a normal turn, and a second, Alt-layer function accessed by holding the pedal's ALT switch. This overlay is a clear, soft vinyl cling that sits over the control panel and prints the Alt-layer name next to every knob, along with the pedal's global parameters, so the hidden settings are always visible instead of memorized.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlt functions shown\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpace Decay — Predelay\u003c\/li\u003e\n\u003cli\u003eModulate — Mod Speed\u003c\/li\u003e\n\u003cli\u003eMix — Pitch Vector Mix\u003c\/li\u003e\n\u003cli\u003eLo Frequency — Density\u003c\/li\u003e\n\u003cli\u003ePitch Vector — Attack Time\u003c\/li\u003e\n\u003cli\u003eHi Frequency — Vibrato Depth\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade specifically for the Meris Mercury7 reverb pedal. Meris offers Alt Function Overlays only for its five compact pedals — Enzo, Hedra, Mercury7, Ottobit Jr. and Polymoon. They are not made for LVX, MercuryX, Enzo X or Ottobit X, which use on-screen menus instead of an Alt knob layer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy players choose it\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClear, soft, thin vinyl construction (v2 revision)\u003c\/li\u003e\n\u003cli\u003eNo adhesive — applies instantly by static cling and lifts off cleanly, without residue\u003c\/li\u003e\n\u003cli\u003ePrinted and made in Massachusetts, USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne Mercury7-specific overlay\u003c\/li\u003e\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eMeris Alt Function Overlay v2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMeris Mercury7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eClear, soft, thin vinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAttachment\u003c\/th\u003e\n\u003ctd\u003eStatic cling, no adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShows\u003c\/th\u003e\n\u003ctd\u003eAlt functions of all six knobs and global parameters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade in\u003c\/th\u003e\n\u003ctd\u003eMassachusetts, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pedal is this overlay made for?\u003c\/strong\u003e The Meris Mercury7 only. Separate overlays are made for Enzo, Hedra, Ottobit Jr. and Polymoon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it use adhesive?\u003c\/strong\u003e No. It applies instantly by static cling and can be removed and repositioned without leaving residue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e Clear, soft, thin vinyl that removes cleanly with no adhesive residue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it show?\u003c\/strong\u003e The Alt-layer function of each knob — Predelay, Mod Speed, Pitch Vector Mix, Density, Attack Time and Vibrato Depth — plus the pedal's global parameters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I reach the Alt functions on Mercury7?\u003c\/strong\u003e Hold the ALT switch and turn a knob; the overlay shows which parameter each knob controls on that layer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it fit the X-series pedals or LVX?\u003c\/strong\u003e No. Overlays are offered only for the five compact two-footswitch pedals (Enzo, Hedra, Mercury7, Ottobit Jr., Polymoon).\u003c\/p\u003e","brand":"Meris","offers":[{"title":"Default Title","offer_id":43472585457917,"sku":"850015619038","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/meris-mercury7-alt-function-overlay.webp?v=1785534507"},{"product_id":"meris-polymoon-alt-function-overlay","title":"Meris Polymoon Alt Function Overlay v2, Clear Static-Cling Vinyl Control Guide","description":"\u003cp\u003eThis clear vinyl overlay labels the hidden Alt-layer functions on your Polymoon's knobs directly on the pedal face, so you can read the second parameter at a glance without memorizing it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach Polymoon knob does double duty: a primary function on a normal turn, and a second, Alt-layer function accessed by holding the pedal's ALT button. This overlay is a clear, soft vinyl cling that sits over the control panel and prints the Alt-layer name next to every knob, along with the pedal's global parameters, so the hidden settings are always visible instead of memorized.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlt functions shown\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTime — Early Modulation\u003c\/li\u003e\n\u003cli\u003eFeedback — Feedback Filter\u003c\/li\u003e\n\u003cli\u003eMix — Delay Level\u003c\/li\u003e\n\u003cli\u003eMultiply — Late Modulation\u003c\/li\u003e\n\u003cli\u003eDimension — Dynamic Flanger Mode\u003c\/li\u003e\n\u003cli\u003eDynamics — Dynamic Flanger Speed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade specifically for the Meris Polymoon delay pedal. Meris offers Alt Function Overlays only for its five compact pedals — Enzo, Hedra, Mercury7, Ottobit Jr. and Polymoon. They are not made for LVX, MercuryX, Enzo X or Ottobit X, which use on-screen menus instead of an Alt knob layer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy players choose it\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClear, soft, thin vinyl construction (v2 revision)\u003c\/li\u003e\n\u003cli\u003eNo adhesive — applies instantly by static cling and lifts off cleanly, without residue\u003c\/li\u003e\n\u003cli\u003ePrinted and made in Massachusetts, USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne Polymoon-specific overlay\u003c\/li\u003e\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eMeris Alt Function Overlay v2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMeris Polymoon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eClear, soft, thin vinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAttachment\u003c\/th\u003e\n\u003ctd\u003eStatic cling, no adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShows\u003c\/th\u003e\n\u003ctd\u003eAlt functions of all six knobs and global parameters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade in\u003c\/th\u003e\n\u003ctd\u003eMassachusetts, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pedal is this overlay made for?\u003c\/strong\u003e The Meris Polymoon only. Separate overlays are made for Enzo, Hedra, Mercury7 and Ottobit Jr.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it use adhesive?\u003c\/strong\u003e No. It applies instantly by static cling and can be removed and repositioned without leaving residue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e Clear, soft, thin vinyl that removes cleanly with no adhesive residue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it show?\u003c\/strong\u003e The Alt-layer function of each knob — Early Modulation, Feedback Filter, Delay Level, Late Modulation, Dynamic Flanger Mode and Dynamic Flanger Speed — plus the pedal's global parameters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I reach the Alt functions on Polymoon?\u003c\/strong\u003e Hold the ALT button and turn a knob; the overlay shows which parameter each knob controls on that layer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it fit the X-series pedals or LVX?\u003c\/strong\u003e No. Overlays are offered only for the five compact two-footswitch pedals (Enzo, Hedra, Mercury7, Ottobit Jr., Polymoon).\u003c\/p\u003e","brand":"Meris","offers":[{"title":"Default Title","offer_id":43472592568573,"sku":"850015619052","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/meris-polymoon-alt-function-overlay.webp?v=1785534507"},{"product_id":"meris-ottobit-jr-alt-function-overlay","title":"Meris Ottobit Jr. Alt Function Overlay v2, Clear Static-Cling Vinyl Control Guide","description":"\u003cp\u003eThis clear vinyl overlay labels the hidden Alt-layer functions on your Ottobit Jr.'s knobs directly on the pedal face, so you can read the second parameter at a glance without memorizing it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach Ottobit Jr. knob does double duty: a primary function on a normal turn, and a second, Alt-layer function accessed by holding the pedal's ALT (Tap\/Alt) switch — on Ottobit Jr. the Alt layer sets the six sequencer steps. This overlay is a clear, soft vinyl cling that sits over the control panel and prints the Alt-layer name next to every knob, along with the pedal's global parameters, so the hidden settings are always visible instead of memorized.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlt functions shown\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSample Rate — Step 1\u003c\/li\u003e\n\u003cli\u003eFilter — Step 2\u003c\/li\u003e\n\u003cli\u003eBits — Step 3\u003c\/li\u003e\n\u003cli\u003eStutter — Step 4\u003c\/li\u003e\n\u003cli\u003eSequencer Play Mode — Step 5\u003c\/li\u003e\n\u003cli\u003eSequencer Multiply — Step 6\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade specifically for the Meris Ottobit Jr. bitcrusher. Meris offers Alt Function Overlays only for its five compact pedals — Enzo, Hedra, Mercury7, Ottobit Jr. and Polymoon. They are not made for LVX, MercuryX, Enzo X or Ottobit X, which use on-screen menus instead of an Alt knob layer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy players choose it\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClear, soft, thin vinyl construction (v2 revision)\u003c\/li\u003e\n\u003cli\u003eNo adhesive — applies instantly by static cling and lifts off cleanly, without residue\u003c\/li\u003e\n\u003cli\u003ePrinted and made in Massachusetts, USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOne Ottobit Jr.-specific overlay\u003c\/li\u003e\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eMeris Alt Function Overlay v2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMeris Ottobit Jr.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eClear, soft, thin vinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAttachment\u003c\/th\u003e\n\u003ctd\u003eStatic cling, no adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShows\u003c\/th\u003e\n\u003ctd\u003eAlt functions (sequencer Steps 1–6) of all six knobs and global parameters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade in\u003c\/th\u003e\n\u003ctd\u003eMassachusetts, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pedal is this overlay made for?\u003c\/strong\u003e The Meris Ottobit Jr. only. Separate overlays are made for Enzo, Hedra, Mercury7 and Polymoon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it use adhesive?\u003c\/strong\u003e No. It applies instantly by static cling and can be removed and repositioned without leaving residue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e Clear, soft, thin vinyl that removes cleanly with no adhesive residue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it show?\u003c\/strong\u003e Which sequencer step (1–6) each knob sets on the Alt layer, plus the pedal's global parameters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I program the sequencer steps on Ottobit Jr.?\u003c\/strong\u003e Hold the ALT (Tap\/Alt) switch and turn each knob to set the value of its step; the overlay shows which knob is which step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it fit Ottobit X or other X-series pedals?\u003c\/strong\u003e No. Overlays are offered only for the five compact two-footswitch pedals (Enzo, Hedra, Mercury7, Ottobit Jr., Polymoon).\u003c\/p\u003e","brand":"Meris","offers":[{"title":"Default Title","offer_id":43472595484925,"sku":"850015619045","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/meris-ottobit-jr-alt-function-overlay.webp?v=1785534507"},{"product_id":"eventide-micropitch-delay","title":"Eventide MicroPitch Delay Pedal, Stereo Micro Pitch Shift and Delay, Tap Tempo, MIDI","description":"\u003cp\u003e\u003cstrong\u003eMicroPitch is the trick behind countless records that sound bigger than the take: shift one side a few cents sharp, the other a few cents flat, add a handful of milliseconds of delay, and a single guitar becomes a wide, glued stereo image.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMicroPitch Delay is the specialist: fine detuning plus delay for width and thickening, not transposition. Two pitch-shifted delay lines do the work: Pitch A shifts up by as much as \u003cstrong\u003e50 cents\u003c\/strong\u003e and Pitch B down by as much as \u003cstrong\u003e50 cents\u003c\/strong\u003e, each with its own delay of up to \u003cstrong\u003e3 seconds\u003c\/strong\u003e (up to \u003cstrong\u003e6 seconds\u003c\/strong\u003e in tap tempo mode).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the MicroPitch Delay\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFine detuning across a stereo pair widens a mono source without the obvious wobble of a chorus.\u003c\/li\u003e\n\u003cli\u003eA dedicated delay per voice goes from tight doubling to slapback-length spread and long detuned echoes with feedback.\u003c\/li\u003e\n\u003cli\u003ePositive and Negative Envelope modulation sources make the detune respond to your picking dynamics and can push the shift as far as major and minor thirds.\u003c\/li\u003e\n\u003cli\u003eFLEX, on a single aux switch, doubles the pitch amounts on demand.\u003c\/li\u003e\n\u003cli\u003eCatch-up mode smooths changes between presets and parameter settings.\u003c\/li\u003e\n\u003cli\u003eFive onboard presets and \u003cstrong\u003e127\u003c\/strong\u003e slots over MIDI keep a subtle rhythm thickener and a wide lead sound in the same pedal; the Guitar\/Line switch lets it work on vocals, keys and other line sources.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix \/ Tone\u003c\/strong\u003e Wet\/dry balance; secondary function shapes the tone of the effect.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch A \/ Delay A\u003c\/strong\u003e Upward detune (up to +50 cents) and delay time for voice A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch B \/ Delay B\u003c\/strong\u003e Downward detune (up to -50 cents) and delay time for voice B.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth \/ Mod\u003c\/strong\u003e Modulation depth and modulation source, including the envelope options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRate \/ Sens \/ Feedback\u003c\/strong\u003e Modulation rate or envelope sensitivity; secondary function sets delay feedback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Mix \/ Output Level\u003c\/strong\u003e Balance between the two pitch voices and overall output level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive footswitch\u003c\/strong\u003e Engages the effect; dual-action, latching or momentary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap footswitch\u003c\/strong\u003e Sets tap tempo in Tap Tempo mode, otherwise scrolls through presets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono\/Stereo and Guitar\/Line switches\u003c\/strong\u003e Set how the TRS input is read and match levels to guitar, synths, effects loops or interfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e 1\/4\" TRS: mono on the tip, stereo on tip and ring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOut 1 \/ Out 2\u003c\/strong\u003e 1\/4\" TS; Out 1 mono, Out 2 mono or the second stereo channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEXP\u003c\/strong\u003e 1\/4\" TRS for an expression pedal (any combination of knob parameters), a single aux switch (FLEX), a triple aux switch (preset up\/down\/load) or MIDI I\/O with a MIDI-to-TRS cable or converter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini USB\u003c\/strong\u003e Software updates and MIDI I\/O.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBypass\u003c\/strong\u003e Selectable: Buffered, Relay (true bypass), DSP+FX (tails continue) or Kill Dry for parallel loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e \u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, \u003cstrong\u003e300 mA\u003c\/strong\u003e, 5.5 mm \/ 2.1 mm barrel. Use an isolated output rated 300 mA or more.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMicroPitch Delay pedal\u003c\/li\u003e\n\u003cli\u003eUniversal power supply with US, EU, UK, JP and AU adapters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eStereo micro pitch shift and delay pedal (digital)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePitch range\u003c\/th\u003e\n\u003ctd\u003ePitch A up to \u003cstrong\u003e+50 cents\u003c\/strong\u003e, Pitch B down to \u003cstrong\u003e-50 cents\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDelay\u003c\/th\u003e\n\u003ctd\u003eUp to \u003cstrong\u003e3 s\u003c\/strong\u003e per voice (\u003cstrong\u003e6 s\u003c\/strong\u003e in tap tempo mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePresets\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e5\u003c\/strong\u003e onboard, \u003cstrong\u003e127\u003c\/strong\u003e via MIDI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBypass\u003c\/th\u003e\n\u003ctd\u003eBuffered, Relay, DSP+FX or Kill Dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAudio I\/O\u003c\/th\u003e\n\u003ctd\u003e1\/4\" TRS input (mono or stereo); 2 x 1\/4\" TS outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl I\/O\u003c\/th\u003e\n\u003ctd\u003eEXP 1\/4\" TRS (expression, aux switch, MIDI); Mini USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e700 kOhm\u003c\/strong\u003e (mono), \u003cstrong\u003e990 kOhm\u003c\/strong\u003e (stereo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput impedance\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e220 Ohm\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended load\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e10 kOhm\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum input level\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e+8 dBu\u003c\/strong\u003e (Guitar), \u003cstrong\u003e+14 dBu\u003c\/strong\u003e (Line)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, 5.5 mm \/ 2.1 mm barrel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e300 mA\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4 x 4.25 x 1.68 in\u003c\/strong\u003e (\u003cstrong\u003e102 x 108 x 43 mm\u003c\/strong\u003e), W x D x H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1.06 lb\u003c\/strong\u003e (\u003cstrong\u003e0.48 kg\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e1 year\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is micro pitch shifting?\u003c\/strong\u003e Very small pitch changes, a few cents, applied to duplicated copies of your signal. Panned apart and delayed slightly, they read as width and thickness rather than as a pitch effect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan MicroPitch do harmonies?\u003c\/strong\u003e Not in the usual sense. Pitch A shifts up by as much as 50 cents and Pitch B down by as much as 50 cents; only the Positive and Negative Envelope modulation can push the shift as far as major and minor thirds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it work on vocals and keys?\u003c\/strong\u003e Yes. Set the rear Guitar\/Line switch to Line when feeding it from a preamp, an interface, a synth or an effects loop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes MicroPitch have tap tempo?\u003c\/strong\u003e Yes. The Tap footswitch sets the tempo in Tap Tempo mode and otherwise scrolls through presets; in tap tempo mode each delay reaches up to 6 seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a daisy chain power it?\u003c\/strong\u003e Not reliably. It draws 300 mA at 9V DC center-negative, so use an isolated output rated 300 mA or more.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I get MIDI into it?\u003c\/strong\u003e Over the 1\/4\" TRS EXP jack with a MIDI-to-TRS cable or converter, or over Mini USB. There is no 5-pin DIN socket on this pedal.\u003c\/p\u003e","brand":"Eventide","offers":[{"title":"Default Title","offer_id":43561276702973,"sku":"840694002078","price":381.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/eventide-micropitch-delay-front-view.jpg?v=1785541779"},{"product_id":"meris-lvx-modular-delay-system","title":"Meris LVX Modular Delay System Pedal, Stereo Dual Delay, 60-Second Looper, MIDI","description":"\u003cp\u003eThe Meris LVX breaks from fixed delay presets entirely, letting you connect processing elements and control-signal modifiers however you like for up to \u003cstrong\u003e2540 ms\u003c\/strong\u003e of configurable dual delay, plus an always-available true stereo looper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Meris LVX is this?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLVX is a modular delay system: you connect discrete processing elements and control-signal modifiers however you like for up to \u003cstrong\u003e2540 ms\u003c\/strong\u003e of configurable dual delay, with a color screen, \u003cstrong\u003e99\u003c\/strong\u003e presets across \u003cstrong\u003e33\u003c\/strong\u003e banks, a true stereo \u003cstrong\u003e60-second\u003c\/strong\u003e looper, an instant tuner, and native 5-pin DIN plus USB-C MIDI. Many of its processing elements are adapted from other Meris pedals: the Poly delay structure, Chorus, Flanger, Dynamic Flanger and Barberpole come from Polymoon; the Compressor, Ladder Filter and State Variable Filter from Enzo; Harmony, Micro Tune and Mono Chroma from Hedra; and the Bit Crusher and Lo-Fi elements from Ottobit Jr.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the LVX\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModular architecture lets you patch processing elements and control-signal modifiers however you like, instead of picking from fixed delay presets.\u003c\/li\u003e\n\u003cli\u003eUp to \u003cstrong\u003e2540 ms\u003c\/strong\u003e of dual delay, with selectable note divisions for each side, covers everything from tight slap-back to long ambient trails.\u003c\/li\u003e\n\u003cli\u003eAlways-available true stereo \u003cstrong\u003e60-second\u003c\/strong\u003e looper works independently of the delay engine.\u003c\/li\u003e\n\u003cli\u003eColor screen and \u003cstrong\u003e99\u003c\/strong\u003e onboard presets make deep patches easy to build, name, and recall, with a Favorites bank for \u003cstrong\u003e3\u003c\/strong\u003e instant-access presets.\u003c\/li\u003e\n\u003cli\u003eInstant-access tuner with configurable reference and output mode, available without leaving your patch or stepping on an extra pedal.\u003c\/li\u003e\n\u003cli\u003eNative 5-pin DIN MIDI In\/Out plus USB-C give full remote control with no external converter box needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDelay Structures, Types and Processing\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelay structures:\u003c\/strong\u003e Standard, MultiTap, Multi Filter, Poly, Reverse, Series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelay types:\u003c\/strong\u003e Digital, BBD (bucket-brigade style), Magnetic (tape-style).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamics:\u003c\/strong\u003e Compressor, Swell, Diffusion, Limiter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreamp:\u003c\/strong\u003e Volume Pedal, Tube, Transistor, Op-Amp, Drive, Bit Crusher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e Ladder Filter, State Variable Filter, Comb Filter, Parametric.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch:\u003c\/strong\u003e Poly Chroma, Harmony, Micro Tune, Mono Chroma, Lo-Fi.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModulation:\u003c\/strong\u003e Chorus, Flanger, Dynamic Flanger, Cassette, Barberpole, Granulize, Ring Mod.\u003c\/li\u003e\n\u003cli\u003eA Modifier section routes control signals to processing parameters; the expression pedal can morph several parameters at once.\u003c\/li\u003e\n\u003cli\u003eTrue stereo processing throughout; the Poly Pitch shifter runs in mono.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime\u003c\/strong\u003e — Sets the base delay time, up to \u003cstrong\u003e2540 ms\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeedback\u003c\/strong\u003e — Controls how many times the delay repeats feed back into themselves for shorter slaps or long, cascading trails.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix\u003c\/strong\u003e — Blends delay output with your dry signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMod\u003c\/strong\u003e — Sets the amount of modulation applied to the repeats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC1 \/ C2 controllers\u003c\/strong\u003e — On the preset page, edit the two favorite parameters assigned to them; in the edit pages, C1 selects a parameter and C2 changes its value.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC3 controller\u003c\/strong\u003e — Turns to change presets, pushes to enter edit mode, and holds to save — the main way to browse LVX's \u003cstrong\u003e99\u003c\/strong\u003e presets across \u003cstrong\u003e33\u003c\/strong\u003e banks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 LED buttons (1, 2, 3, Tap)\u003c\/strong\u003e — Mirror the four footswitches for desktop and studio use without reaching for the floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootswitches 1, 2, 3\u003c\/strong\u003e — Engage or bypass presets in normal play (hold 1 + 2 for the Favorites bank); in Looper Mode they become Record\/Overdub, Play\/Stop, and Loop FX 1 (Play Once, Retrigger, or Expression Pedal Warp).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap footswitch\u003c\/strong\u003e — Taps in delay time; hold to enter the always-available true stereo \u003cstrong\u003e60-second\u003c\/strong\u003e looper, where it doubles as Loop FX 2 (Reverse, Half Speed, or Half Speed\/Reverse). Hold 3 + Tap for the tuner.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStereo input and output on separate 1\/4\" jacks; headroom switchable between Instrument and Line\/Synth levels, so LVX works with guitar, bass, synths and line-level sources.\u003c\/li\u003e\n\u003cli\u003eDedicated expression pedal jack.\u003c\/li\u003e\n\u003cli\u003e5-pin DIN MIDI In and Out (MIDI Thru selectable in Globals): continuous control, preset send\/receive and MIDI beat clock sync.\u003c\/li\u003e\n\u003cli\u003eUSB-C for firmware updates and MIDI over USB (firmware \u003cstrong\u003e1.5\u003c\/strong\u003e and later).\u003c\/li\u003e\n\u003cli\u003eFree prEDITOR desktop editor\/librarian (Mac\/PC) for editing, organizing and sharing presets.\u003c\/li\u003e\n\u003cli\u003ePower: \u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, 2.1 mm barrel, at least \u003cstrong\u003e300 mA\u003c\/strong\u003e. A power supply is not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse an isolated supply output rated for at least \u003cstrong\u003e300 mA\u003c\/strong\u003e. Tested-compatible supplies include the Meris 9V supply, MXR Mini Iso-Brick, MXR Iso-Brick and Cioks DC7; units shipped from November 10, 2022 have a startup-delay modification that adds compatibility with supplies such as the Voodoo Lab Pedal Power 3, Pedal Power 4x4 and X8, Strymon Zuma and Ojai, Truetone 1 SPOT Pro CS12, Cioks Ciokolate, RockBoard ISO Power Block 9 and MXR Iso-Brick Pro. The relay true bypass works with mono input and output only; stereo connections, Trails, Spillover, or Kill Dry automatically switch LVX to Analog Buffered Bypass, so plan pedalboard placement around whichever bypass mode your patch uses.\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMeris LVX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect type\u003c\/th\u003e\n\u003ctd\u003eModular delay system with looper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDelay time\u003c\/th\u003e\n\u003ctd\u003eDual delay, up to \u003cstrong\u003e2540 ms\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLooper\u003c\/th\u003e\n\u003ctd\u003eTrue stereo, \u003cstrong\u003e60 seconds\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePresets\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e99\u003c\/strong\u003e in \u003cstrong\u003e33\u003c\/strong\u003e banks, plus a Favorites bank of \u003cstrong\u003e3\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopology\u003c\/th\u003e\n\u003ctd\u003eDigital (24-bit A\/D and D\/A, 32-bit floating-point DSP, \u003cstrong\u003e48 kHz\u003c\/strong\u003e) with analog mix bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAudio I\/O\u003c\/th\u003e\n\u003ctd\u003eStereo in \/ stereo out, separate 1\/4\" jacks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e1 MΩ\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax input level\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e+9 dBu\u003c\/strong\u003e (Instrument), \u003cstrong\u003e+12.5 dBu\u003c\/strong\u003e (Line\/Synth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e20 Hz – 20 kHz\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal-to-noise ratio\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e115 dB\u003c\/strong\u003e typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBypass\u003c\/th\u003e\n\u003ctd\u003eSelectable relay true bypass (mono only) or analog buffered bypass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMIDI\u003c\/th\u003e\n\u003ctd\u003e5-pin DIN In and Out (Thru selectable); MIDI over USB-C (firmware 1.5+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpression input\u003c\/th\u003e\n\u003ctd\u003eYes, dedicated jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTap tempo\u003c\/th\u003e\n\u003ctd\u003eYes, Tap footswitch and MIDI beat clock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, 2.1 mm, at least \u003cstrong\u003e300 mA\u003c\/strong\u003e (supply not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e7.25 × 4.5 × 2 in\u003c\/strong\u003e (\u003cstrong\u003e184 × 114 × 51 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24 oz\u003c\/strong\u003e (\u003cstrong\u003e680 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade in\u003c\/th\u003e\n\u003ctd\u003eDesigned and built in California, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much delay time does LVX have?\u003c\/strong\u003e Up to \u003cstrong\u003e2540 ms\u003c\/strong\u003e of highly configurable dual delay, with selectable note divisions for each side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes LVX have a looper?\u003c\/strong\u003e Yes. An always-available true stereo \u003cstrong\u003e60-second\u003c\/strong\u003e looper, entered by holding the Tap footswitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes LVX have a tuner?\u003c\/strong\u003e Yes. Hold footswitch 3 and Tap together to open the instant-access tuner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan LVX replace my Polymoon, Enzo or Hedra?\u003c\/strong\u003e LVX includes processing elements adapted from those pedals — for example the Poly structure and Barberpole from Polymoon, the Ladder Filter from Enzo and Harmony from Hedra — but it is a different, modular delay platform rather than a copy of their effect engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes LVX work with the Meris Preset Switch?\u003c\/strong\u003e No. LVX selects presets with its own four footswitches and over MIDI; its EXP jack is a dedicated expression pedal input.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes LVX need the Meris MIDI I\/O box?\u003c\/strong\u003e No. LVX has its own 5-pin DIN MIDI In\/Out jacks plus MIDI over USB-C on firmware 1.5 and later.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does LVX need?\u003c\/strong\u003e \u003cstrong\u003e9V DC, center-negative\u003c\/strong\u003e, 2.1 mm barrel, at least \u003cstrong\u003e300 mA\u003c\/strong\u003e. A power supply is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs LVX true bypass in stereo?\u003c\/strong\u003e No. Relay true bypass works only with mono input and output; stereo connections, Trails, Spillover and Kill Dry use analog buffered bypass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I update LVX firmware?\u003c\/strong\u003e Hold footswitches 1 and 3 while powering up, connect the rear USB-C jack to a computer, copy the extracted .bin firmware file onto the LVX drive, eject, then power cycle.\u003c\/p\u003e","brand":"Meris","offers":[{"title":"Default Title","offer_id":43599399583997,"sku":"850015619069","price":849.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/meris-lvx-front.jpg?v=1785534507"},{"product_id":"death-by-audio-reverberation-machine","title":"Death by Audio Reverberation Machine Reverb Pedal","description":"\u003cp\u003e\u003cstrong\u003eA reverb that can be louder than the note that caused it.\u003c\/strong\u003e Reverberation Machine is a synthetic atmosphere creator: drippy saturated spring reverbs and cavernous expanses at moderate settings, and a distorted wall of shimmering gloom when you push the Altitude control. The Verb knob runs to 125 percent, so the reflection can outweigh the source.\u003c\/p\u003e\n\u003ch3\u003eWhich Death by Audio reverb is this?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-int\/products\/death-by-audio-rooms-stereo-reverberator\"\u003eRooms\u003c\/a\u003e: six programmed stereo reverb algorithms with expression control.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-int\/products\/death-by-audio-dream-station-stereo-reverb-delay-pedal-with-filters-ping-pong-stereo-trails\"\u003eDream Station\u003c\/a\u003e: reverb and delay together in a small stereo enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-int\/products\/death-by-audio-echo-dream-2\"\u003eEcho Dream 2\u003c\/a\u003e: modulated echo with a fuzz stage after the repeats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReverberation Machine is the saturated mono one. It is the choice when you want the reverb itself to distort rather than to stay clean behind the guitar.\u003c\/p\u003e\n\u003ch3\u003eWhy guitarists choose the Reverberation Machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAltitude adds gain to the reverb, which turns a clean tail into a wide open distorted wash.\u003c\/li\u003e\n\u003cli\u003eThe Verb control reaches 125 percent wet, so the reverb can be louder than your input signal.\u003c\/li\u003e\n\u003cli\u003eA dark and light toggle switches between cavernous reverberation and bright shimmer without touching the other controls.\u003c\/li\u003e\n\u003cli\u003eThree controls and one toggle keep it fast to dial in during a set.\u003c\/li\u003e\n\u003cli\u003eIt runs from a standard 9 V battery as well as a DC adapter.\u003c\/li\u003e\n\u003cli\u003eTrue bypass, hand built in New York City.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControls and switches\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVOL sets the master output volume, on a scale running from silence to full.\u003c\/li\u003e\n\u003cli\u003eALTITUDE works like a gain control: turn it up for a wider open and more distorted sound.\u003c\/li\u003e\n\u003cli\u003eVERB blends in the amount of reverb on a scale that runs up to 125 percent.\u003c\/li\u003e\n\u003cli\u003eThe dark and light toggle chooses between dark cavernous reverberation and bright shimmering reverberation.\u003c\/li\u003e\n\u003cli\u003eThe footswitch is true bypass, with a red indicator LED.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePower and pedalboard compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRuns on 9 V DC, 2.1 mm barrel, center negative.\u003c\/li\u003e\n\u003cli\u003eCurrent draw is 66 mA, so budget that on your supply.\u003c\/li\u003e\n\u003cli\u003eA 9 V battery can also power it.\u003c\/li\u003e\n\u003cli\u003eTrue bypass means it is completely out of the signal path when it is off, so place it wherever the chain sounds best.\u003c\/li\u003e\n\u003cli\u003eJacks sit along the top edge, which keeps patch cables out of the row in front.\u003c\/li\u003e\n\u003cli\u003eRouting: Mono (single OUTPUT and INPUT shown on the manual panel diagram).\u003c\/li\u003e\n\u003cli\u003eIt measures 12.34 x 9.32 x 5.23 cm including hardware, so measure your row before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDeath by Audio Reverberation Machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffect type\u003c\/td\u003e\n\u003ctd\u003eSaturated reverb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControls\u003c\/td\u003e\n\u003ctd\u003eVol, Altitude, Verb, dark and light toggle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBypass\u003c\/td\u003e\n\u003ctd\u003eTrue bypass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExpression or CV input\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e9 V DC, 2.1 mm barrel, center negative\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent draw (mA)\u003c\/td\u003e\n\u003ctd\u003e66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop mounted jacks\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRouting\u003c\/td\u003e\n\u003ctd\u003eMono (single OUTPUT and INPUT shown on the manual panel diagram)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003eINPUT jack, OUTPUT jack, POWER jack (per manual panel diagram); jack sizes not published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions including hardware\u003c\/td\u003e\n\u003ctd\u003e12.34 x 9.32 x 5.23 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e14 oz.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e720260152379\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e720260152379\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASIN\u003c\/td\u003e\n\u003ctd\u003eB07CFKPHTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacture and warranty\u003c\/td\u003e\n\u003ctd\u003eHandmade in New York City\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Altitude control actually change?\u003c\/strong\u003e It behaves like a gain control on the reverb. Higher settings open the sound up and add distortion to the tail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the Verb scale go past 100 percent?\u003c\/strong\u003e Because the reverb can be mixed louder than the dry signal. At the 125 percent end the reflections dominate completely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I be careful with the levels?\u003c\/strong\u003e Yes. Death By Audio warns that with Altitude and Verb past 12 o'clock the pedal can produce potentially harmful volumes, white noise and other artefacts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the toggle do?\u003c\/strong\u003e It selects dark cavernous reverberation or bright shimmering reverberation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it run on a battery?\u003c\/strong\u003e Yes, it runs on a standard 9 V battery as well as a 9 V DC adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much current does it draw?\u003c\/strong\u003e The official product page lists 66 mA and the manual lists 54 mA. Allow for the higher figure when planning a supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it true bypass?\u003c\/strong\u003e Yes.\u003c\/p\u003e","brand":"Death by Audio","offers":[{"title":"Default Title","offer_id":43599781921021,"sku":"720260152379","price":315.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/death-by-audio-reverberation-machine-reverb-pedal-top-view.jpg?v=1785565073"},{"product_id":"death-by-audio-echo-master","title":"Death by Audio Echo Master Vocal Delay Pedal, Lo-Fi Tape-Style Echo, XLR In\/Out, FX Loop","description":"\u003cp\u003e\u003cstrong\u003eA tape style echo built for a microphone, not a guitar amp.\u003c\/strong\u003e Echo Master is a lo fi, analog tape style delay designed for vocals. Matched Bourns input transformers create a vibrant, feedback minimizing transformer balanced microphone preamp, Neutrik XLR connectors handle the signal, and an impedance matched effects loop lets other pedals join the vocal chain.\u003c\/p\u003e\n\u003ch3\u003eWhich Death by Audio echo is this?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-int\/products\/death-by-audio-echo-dream-2\"\u003eEcho Dream 2\u003c\/a\u003e: the quarter inch instrument echo with modulation and fuzz.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-int\/products\/death-by-audio-dream-station-stereo-reverb-delay-pedal-with-filters-ping-pong-stereo-trails\"\u003eDream Station\u003c\/a\u003e: instrument level stereo reverb and delay.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-int\/products\/death-by-audio-reverberation-machine\"\u003eReverberation Machine\u003c\/a\u003e: instrument level saturated reverb.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEcho Master is the only unit in this group with XLR connections and a microphone preamp, so it is the one that belongs on a mic stand rather than a pedalboard.\u003c\/p\u003e\n\u003ch3\u003eWhy singers choose the Echo Master\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransformer balanced XLR input and output let it sit in a live vocal chain without unbalanced adapters.\u003c\/li\u003e\n\u003cli\u003eThe voicing is chosen to avoid the shriek that usually arrives when a delay meets a stage monitor.\u003c\/li\u003e\n\u003cli\u003eThe delay scale is printed in milliseconds with a red zone that shows exactly where the chip starts to break up.\u003c\/li\u003e\n\u003cli\u003eThe effects loop sits before the echo and affects both dry and delayed vocals, so other pedals can join the chain cleanly.\u003c\/li\u003e\n\u003cli\u003eThe Send jack can be used on its own to split a clean copy of the vocal.\u003c\/li\u003e\n\u003cli\u003eHandmade in New York with a lifetime warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControls and switches\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTIME sets the delay from 30 ms to 620 ms. In the marked Red Zone the delay chip is pushed beyond its comfort zone and fidelity drops as time increases.\u003c\/li\u003e\n\u003cli\u003eF-BACK sets the number of repeats, from one to infinite to a wall of oscillation, with a red scale showing feedback buildup time in seconds.\u003c\/li\u003e\n\u003cli\u003eMIX balances the dry vocal against the echo.\u003c\/li\u003e\n\u003cli\u003eSEND and RECEIVE form an effects loop before the echo, which is not affected by the Mix control.\u003c\/li\u003e\n\u003cli\u003eThere is no bypass footswitch. The unit is always on.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePower and pedalboard compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRuns on 9 V DC, 2.1 mm barrel, center negative.\u003c\/li\u003e\n\u003cli\u003eCurrent draw is 25 mA, so budget that on your supply.\u003c\/li\u003e\n\u003cli\u003eDeath By Audio does not publish battery operation for this one, so plan on a regulated DC supply.\u003c\/li\u003e\n\u003cli\u003eJacks sit along the top edge, which keeps patch cables out of the row in front.\u003c\/li\u003e\n\u003cli\u003eRouting: Mono vocal signal path (single XLR in \/ XLR out plus a mono FX loop).\u003c\/li\u003e\n\u003cli\u003eIt measures 15.47 x 8.76 x 6.99 cm including hardware, so measure your row before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDeath by Audio Echo Master\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffect type\u003c\/td\u003e\n\u003ctd\u003eVocal tape style delay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControls\u003c\/td\u003e\n\u003ctd\u003eTime, F-Back, Mix, Send and Receive effects loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExpression or CV input\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e9 V DC, 2.1 mm barrel, center negative\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent draw (mA)\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop mounted jacks\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRouting\u003c\/td\u003e\n\u003ctd\u003eMono vocal signal path (single XLR in \/ XLR out plus a mono FX loop)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions including hardware\u003c\/td\u003e\n\u003ctd\u003e15.47 x 8.76 x 6.99 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eStandard: 16 oz.; Alternate (mic stand clip) Back Plate: 30 oz.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e720260152287\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e720260152287\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASIN\u003c\/td\u003e\n\u003ctd\u003eB07C32G4BC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacture and warranty\u003c\/td\u003e\n\u003ctd\u003eHandmade in New York City, lifetime warranty from Death By Audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it pass phantom power?\u003c\/strong\u003e No. The official Death By Audio FAQ states the Echo Master will not pass +48 V phantom power through its XLR connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat level does it output?\u003c\/strong\u003e Death By Audio describes the output as closer to microphone level than line level, so treat it as a mic level device at the desk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a bypass switch?\u003c\/strong\u003e No. The Echo Master is always on, so set the Mix control to taste and leave the unit in the chain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere does the effects loop sit?\u003c\/strong\u003e The loop is placed before the echo. The manual notes that it affects both dry and delayed signals and is not controlled by the Mix knob.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the delay get noisy at long times?\u003c\/strong\u003e Above roughly 290 ms the delay chip is being pushed beyond its intended specification, which is what creates the lo fi noise and distortion marked on the Red Zone scale.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e A 9 VDC power supply in a US or EU version. Cords, a microphone and a stand are not included, and the mic stand clip backplate is offered separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I connect power or audio first?\u003c\/strong\u003e Connect the power supply before plugging in the XLR cables, as the manual instructs.\u003c\/p\u003e","brand":"Death by Audio","offers":[{"title":"Default Title","offer_id":43599788540157,"sku":"720260152287","price":415.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/death-by-audio-echo-master-vocal-delay-top-view.jpg?v=1785565054"},{"product_id":"death-by-audio-echo-dream-2","title":"Death by Audio Echo Dream 2 Modulating Delay Pedal with Fuzz, 9–18V, Kill-Dry Toggle","description":"\u003cp\u003e\u003cstrong\u003eA delay that warbles, warps and then gets pulverised by fuzz.\u003c\/strong\u003e Echo Dream 2 is a lush modulating echo with a fuzz stage after the delay. Gentle warble and chorus sit at one end, fully warped repeats and runaway self oscillation at the other, and the Fuzz control can distort clean signal and repeats alike.\u003c\/p\u003e\n\u003ch3\u003eWhich Death by Audio delay is this?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-int\/products\/death-by-audio-dream-station-stereo-reverb-delay-pedal-with-filters-ping-pong-stereo-trails\"\u003eDream Station\u003c\/a\u003e: reverb and delay together in a small stereo enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-int\/products\/death-by-audio-space-bender\"\u003eSpace Bender\u003c\/a\u003e: modulated delay lines used as a chorus rather than an echo.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-int\/products\/death-by-audio-echo-master\"\u003eEcho Master\u003c\/a\u003e: the XLR vocal version of the Death By Audio echo idea.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEcho Dream 2 is the full featured mono echo with its own modulator and fuzz. Reach for it when the repeats themselves need to be the effect.\u003c\/p\u003e\n\u003ch3\u003eWhy guitarists choose the Echo Dream 2\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA dedicated modulator with Speed and Depth turns plain repeats into warble, chorus or full pitch warp.\u003c\/li\u003e\n\u003cli\u003eThe Fuzz control sits after the echo, so you can dirty the repeats without losing the note you played.\u003c\/li\u003e\n\u003cli\u003eThe Dry toggle kills the dry signal, which makes it usable as a wet only send in a studio setup.\u003c\/li\u003e\n\u003cli\u003eFBACK runs from single slapback to runaway self oscillation for controlled chaos.\u003c\/li\u003e\n\u003cli\u003eIt accepts 9 V, 12 V or 18 V DC, so extra headroom is one power cable away.\u003c\/li\u003e\n\u003cli\u003eTrue bypass with a 9 V battery option and only 40 mA of current draw.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControls and switches\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMASTER sets the overall output volume.\u003c\/li\u003e\n\u003cli\u003eFUZZ sets the gain after the echo, from clean through overdrive to fuzz, and distorts both clean signal and repeats.\u003c\/li\u003e\n\u003cli\u003eDELAY sets the level of the delayed signal.\u003c\/li\u003e\n\u003cli\u003eD TIME sets the time between repeats, with the scale marked in milliseconds.\u003c\/li\u003e\n\u003cli\u003eFBACK sets the feedback, from slapback to runaway self oscillation.\u003c\/li\u003e\n\u003cli\u003eSPEED sets the modulator rate and DEPTH sets how far the modulator swings the delay time.\u003c\/li\u003e\n\u003cli\u003eThe DRY toggle up passes the dry signal, down kills it so only repeats are heard.\u003c\/li\u003e\n\u003cli\u003eThe MOD SHAPE toggle up gives a smoother sine like waveform and down gives a sharp square shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePower and pedalboard compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRuns on 9-18 V DC (page: \"9V, 12V, or 18V VDC supply\"; manual: \"9-18 Volt DC Adaptor\"), 2.1 mm barrel, center negative.\u003c\/li\u003e\n\u003cli\u003eCurrent draw is 40 mA, so budget that on your supply.\u003c\/li\u003e\n\u003cli\u003eA 9 V battery can also power it.\u003c\/li\u003e\n\u003cli\u003eTrue bypass means it is completely out of the signal path when it is off, so place it wherever the chain sounds best.\u003c\/li\u003e\n\u003cli\u003eJacks sit along the top edge, which keeps patch cables out of the row in front.\u003c\/li\u003e\n\u003cli\u003eRouting: Mono (single INPUT and OUTPUT shown on the manual panel diagram).\u003c\/li\u003e\n\u003cli\u003eIt measures 14.91 x 11.99 x 5.97 cm including hardware, so measure your row before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDeath by Audio Echo Dream 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffect type\u003c\/td\u003e\n\u003ctd\u003eModulating delay with fuzz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControls\u003c\/td\u003e\n\u003ctd\u003eMaster, Fuzz, Delay, D Time, FBack, Speed, Depth, Dry toggle, Mod Shape toggle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBypass\u003c\/td\u003e\n\u003ctd\u003eTrue bypass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExpression or CV input\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e9-18 V DC (page: \"9V, 12V, or 18V VDC supply\"; manual: \"9-18 Volt DC Adaptor\"), 2.1 mm barrel, center negative\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent draw (mA)\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop mounted jacks\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRouting\u003c\/td\u003e\n\u003ctd\u003eMono (single INPUT and OUTPUT shown on the manual panel diagram)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003eINPUT jack, OUTPUT jack, 9-18 V DC power jack (per manual panel diagram, which is labelled \"9-18V\"); jack sizes not published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions including hardware\u003c\/td\u003e\n\u003ctd\u003e14.91 x 11.99 x 5.97 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e21 oz.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e720260152270\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e720260152270\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASIN\u003c\/td\u003e\n\u003ctd\u003eB07C2JG1VC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacture and warranty\u003c\/td\u003e\n\u003ctd\u003eHandmade in New York City, lifetime warranty from Death By Audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow long are the repeats?\u003c\/strong\u003e The official product page describes D Time as running between 20 ms and 1 second, while the manual states 20 ms to 1.2 seconds. Both cover slapback through long, warped echoes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run it at 18 volts?\u003c\/strong\u003e Yes. Death By Audio lists 9 V, 12 V or 18 V DC operation for this pedal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Dry toggle do?\u003c\/strong\u003e Up lets the dry signal through, down removes it so you hear only the repeats. That makes it useful on an effects send.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the fuzz affect my clean tone?\u003c\/strong\u003e Yes if the dry signal is passing. The Fuzz stage sits after the echo and distorts both the dry sound and the repeats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the two modulation shapes?\u003c\/strong\u003e Up is a smoother sine like waveform for warble and chorus. Down is a sharp square shape for stepped, jarring pitch movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it run on a battery?\u003c\/strong\u003e Yes, a 9 V battery is supported. Current draw is 40 mA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a warranty?\u003c\/strong\u003e Death By Audio states the pedal is guaranteed for life and asks owners to contact repairs@deathbyaudio.com.\u003c\/p\u003e","brand":"Death by Audio","offers":[{"title":"Default Title","offer_id":43599794471165,"sku":"720260152270","price":390.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/death-by-audio-echo-dream-2-modulating-delay-pedal-top-view.jpg?v=1785565054"},{"product_id":"death-by-audio-rooms-stereo-reverberator","title":"Death by Audio Rooms Stereo Reverb Pedal, 6 Algorithms, ALT Footswitch, Expression\/CV Input","description":"\u003cp\u003e\u003cstrong\u003eSix programmed spaces, from a small room to a gong.\u003c\/strong\u003e Rooms is a stereo, multi function digital reverb capable of searing volume, gated walls of sound and long trailing ambiences. Six programmed algorithms named Room, Digit, Peak, Gate, Wave and Gong each remap the Freq and Depth controls, and an ALT footswitch gives you a second set of settings plus expression control.\u003c\/p\u003e\n\u003ch3\u003eWhich Death by Audio reverb is this?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-int\/products\/death-by-audio-reverberation-machine\"\u003eReverberation Machine\u003c\/a\u003e: a saturated mono reverb with an Altitude gain control.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-int\/products\/death-by-audio-dream-station-stereo-reverb-delay-pedal-with-filters-ping-pong-stereo-trails\"\u003eDream Station\u003c\/a\u003e: reverb and delay together in a small stereo enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-int\/products\/death-by-audio-echo-dream-2\"\u003eEcho Dream 2\u003c\/a\u003e: modulated echo rather than reverb.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRooms is the programmable stereo one. It is the choice when you want several distinct reverb characters and a footswitchable second setting rather than a single voice.\u003c\/p\u003e\n\u003ch3\u003eWhy guitarists choose the Rooms\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSix algorithms cover natural rooms, digital artefacts, resonant peaks, gated walls, modulated waves and gong style resonance.\u003c\/li\u003e\n\u003cli\u003eThe ALT footswitch stores a second position of the F, D and T knobs, so a verse and a chorus setting are one step apart.\u003c\/li\u003e\n\u003cli\u003eDry and FX each reach +20 dB, which lets the reverb sit gently under the guitar or completely swamp it.\u003c\/li\u003e\n\u003cli\u003eAn expression pedal or 0 to 3.3 V control voltage can sweep either Time or Frequency, selected with the side slider.\u003c\/li\u003e\n\u003cli\u003eStereo inputs and outputs with mono splitting mean it works in almost any rig layout.\u003c\/li\u003e\n\u003cli\u003eTrue bypass, hand built in New York City.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControls and switches\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFREQ sets the frequency parameter of the current mode and DEPTH sets the depth parameter, both remapped for each algorithm.\u003c\/li\u003e\n\u003cli\u003eTIME sets the reverb time in every mode.\u003c\/li\u003e\n\u003cli\u003eDRY sets the volume of the dry signal from silence to +20 dB, and FX does the same for the reverb signal.\u003c\/li\u003e\n\u003cli\u003eThe six position mode selection chooses 1 Room, 2 Digit, 3 Peak, 4 Gate, 5 Wave or 6 Gong.\u003c\/li\u003e\n\u003cli\u003eThe ALT footswitch engages the second set of F, D and T settings and enables expression control.\u003c\/li\u003e\n\u003cli\u003eThe F to T slider on the side selects whether the expression input controls Frequency or Time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePower and pedalboard compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRuns on 9 V DC, 2.1 mm barrel, center negative.\u003c\/li\u003e\n\u003cli\u003eCurrent draw is 80 mA, so budget that on your supply.\u003c\/li\u003e\n\u003cli\u003eDeath By Audio does not publish battery operation for this one, so plan on a regulated DC supply.\u003c\/li\u003e\n\u003cli\u003eTrue bypass means it is completely out of the signal path when it is off, so place it wherever the chain sounds best.\u003c\/li\u003e\n\u003cli\u003eJacks sit along the top edge, which keeps patch cables out of the row in front.\u003c\/li\u003e\n\u003cli\u003eRouting: Stereo (with mono-in splitting).\u003c\/li\u003e\n\u003cli\u003eIt measures 15.11 x 9.8 x 7.52 cm including hardware, so measure your row before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDeath by Audio Rooms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffect type\u003c\/td\u003e\n\u003ctd\u003eStereo digital reverb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControls\u003c\/td\u003e\n\u003ctd\u003eFreq, Depth, Time, Dry, FX, six position mode selection, ALT footswitch, F to T slider\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBypass\u003c\/td\u003e\n\u003ctd\u003eTrue bypass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal path\u003c\/td\u003e\n\u003ctd\u003eDigital\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExpression or CV input\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e9 V DC, 2.1 mm barrel, center negative\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent draw (mA)\u003c\/td\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop mounted jacks\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRouting\u003c\/td\u003e\n\u003ctd\u003eStereo (with mono-in splitting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions including hardware\u003c\/td\u003e\n\u003ctd\u003e15.11 x 9.8 x 7.52 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e13 oz.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e681827918749\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e681827918749\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASIN\u003c\/td\u003e\n\u003ctd\u003eB08LZRQG7T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacture and warranty\u003c\/td\u003e\n\u003ctd\u003eHandmade in New York City\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do the six modes do?\u003c\/strong\u003e They are six meticulously programmed reverb algorithms: Room, Digit, Peak, Gate, Wave and Gong. Each one remaps what the Freq and Depth controls change.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the ALT footswitch work?\u003c\/strong\u003e It switches between two sets of the F, D and T controls and turns on expression control, so you can jump between two reverb settings with one step.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I use an expression pedal?\u003c\/strong\u003e Plug any TRS expression pedal or a 0 to 3.3 V control voltage into the EXP input. Expression only works in ALT mode, and the small ALT knob sets the minimum value of the sweep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do the stereo inputs work?\u003c\/strong\u003e Plugging only into IN R splits the dry signal to both outputs. Plugging into IN L separates the left and right clean signals to their own outputs. The reverb always cascades for a wider stereo image.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow loud can the reverb get?\u003c\/strong\u003e Both Dry and FX reach +20 dB, which is where the searing volume and gated walls of sound come from.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it analog or digital?\u003c\/strong\u003e It is a digital reverb with six programmed algorithms, in a true bypass enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power does it need?\u003c\/strong\u003e 9 V DC through a 2.1 mm center negative barrel, drawing 80 mA.\u003c\/p\u003e","brand":"Death by Audio","offers":[{"title":"Default Title","offer_id":43599814328573,"sku":"681827918749","price":550.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/death-by-audio-rooms-stereo-reverb-pedal-top-view.jpg?v=1785565073"},{"product_id":"t-rex-soulmate-acoustic-effect-board","title":"T-Rex SoulMate Acoustic Multi-Effects Board, FET Preamp\/DI, Looper, Tuner, Stereo XLR Outs","description":"\u003cp\u003eAn all-in-one pedalboard for acoustic guitar and other acoustic string instruments with a pickup or microphone. The SoulMate Acoustic combines a FET input preamp, the effects acoustic players reach for most, a stereo looper and a fast chromatic tuner, and feeds the PA directly through balanced XLR outputs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SoulMate Acoustic?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a purpose-built acoustic board: input preamp with gain, impedance and phase controls, Compressor, Modulation (classic chorus\/detune), 3-band parametric EQ, warm Delay with tap tempo, Hall reverb with Shimmer, a post-effects Boost, a 5-minute stereo looper, an ultra-fast chromatic tuner and automatic feedback suppression. Dual stereo outputs on 1\/4\" and XLR make it the entire chain between the instrument and the front-of-house mixer. It is the acoustic-focused counterpart to the electric-guitar SoulMate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose this board\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eComplete acoustic toolbox on one board — no separate patch cables between pedals.\u003c\/li\u003e\n\u003cli\u003eFET input preamp with gain control, selectable \u003cstrong\u003e1 MΩ \/ 10 MΩ\u003c\/strong\u003e input impedance for pickups or microphones, and a phase switch for taming feedback and phase issues.\u003c\/li\u003e\n\u003cli\u003eAutomatic feedback suppression: a notch filter that detects feedback and cuts it.\u003c\/li\u003e\n\u003cli\u003eDual stereo outputs — 1\/4\" L\/R and balanced XLR L\/R with ground lift — go straight to a PA or recording interface without a separate DI box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-bit \/ 48 kHz\u003c\/strong\u003e effects processing with \u003cstrong\u003e1 ms\u003c\/strong\u003e latency.\u003c\/li\u003e\n\u003cli\u003eStereo looper with up to about \u003cstrong\u003e5 minutes\u003c\/strong\u003e of recording time and a fast chromatic tuner on board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSections and controls\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput preamp\u003c\/strong\u003e — gain control, impedance switch (1 MΩ \/ 10 MΩ), phase switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor\u003c\/strong\u003e — evens out picking dynamics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModulation\u003c\/strong\u003e — classic chorus \/ detune.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-band parametric EQ\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelay\u003c\/strong\u003e — warm delay with tap tempo footswitch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverb\u003c\/strong\u003e — Hall reverb with a Shimmer effect; Shimmer can be controlled by an expression pedal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoost\u003c\/strong\u003e — post-effects level boost on its own footswitch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLooper\u003c\/strong\u003e — stereo, record\/playback and stop\/clear footswitches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuner\u003c\/strong\u003e — ultra-fast chromatic tuner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeedback killer\u003c\/strong\u003e — automatic feedback suppression.\u003c\/li\u003e\n\u003cli\u003eOptional master volume control from an expression pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" instrument input.\u003c\/li\u003e\n\u003cli\u003eExpression inputs for Shimmer and for master Volume.\u003c\/li\u003e\n\u003cli\u003e1\/4\" outputs (L\/R) and XLR outputs (L\/R) with ground lift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12V DC center-negative\u003c\/strong\u003e power supply included; operating range \u003cstrong\u003e11.5–12.5 V DC\u003c\/strong\u003e — do not substitute a 9 V pedal supply.\u003c\/li\u003e\n\u003cli\u003eCurrent draw up to \u003cstrong\u003e560 mA\u003c\/strong\u003e at 12 V — well beyond a typical 100 mA isolated pedal-supply output.\u003c\/li\u003e\n\u003cli\u003eNo battery operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eT-Rex SoulMate Acoustic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eAll-in-one acoustic preamp \/ multi-effects board with looper and tuner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects\u003c\/th\u003e\n\u003ctd\u003eCompressor, chorus\/detune, 3-band parametric EQ, delay with tap tempo, hall reverb with shimmer, post boost, feedback suppression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects processor\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\u003c\/strong\u003e, \u003cstrong\u003e48 kHz\u003c\/strong\u003e, \u003cstrong\u003e1 ms\u003c\/strong\u003e latency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLooper\u003c\/th\u003e\n\u003ctd\u003eStereo, \u003cstrong\u003e24-bit\u003c\/strong\u003e, up to approx. \u003cstrong\u003e5.8 min\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1 MΩ \/ 10 MΩ\u003c\/strong\u003e, selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput impedance\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e330 Ω\u003c\/strong\u003e (XLR), \u003cstrong\u003e1.5 kΩ\u003c\/strong\u003e (1\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum input signal\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e3.5 Vp-p\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003ctd\u003eInput, Exp. Shimmer, Exp. Volume, 1\/4\" outputs L\/R, XLR outputs L\/R, power inlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e12V DC\u003c\/strong\u003e center-negative (\u003cstrong\u003e11.5–12.5 V\u003c\/strong\u003e), PSU included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e560 mA\u003c\/strong\u003e max. at 12 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W × H × D, incl. knobs)\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e15.75 × 2.44 × 5.83 in\u003c\/strong\u003e (\u003cstrong\u003e400 × 62 × 148 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4.4 lb\u003c\/strong\u003e (\u003cstrong\u003e2 kg\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it with an electric guitar?\u003c\/strong\u003e It is designed for acoustic string instruments with a pickup or microphone; the preamp, EQ and effects are voiced for that. For electric guitar, the standard T-Rex SoulMate is the intended model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I still need a DI box for the sound engineer?\u003c\/strong\u003e No — balanced XLR outputs (L\/R) with ground lift are built in, so the board can feed the PA or mixer directly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use my own 9 V power supply?\u003c\/strong\u003e No. It needs 12 V DC, center-negative, at up to 560 mA; the correct supply is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a tuner?\u003c\/strong\u003e Yes — a built-in, ultra-fast chromatic tuner. There is no separate tuner output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the looper?\u003c\/strong\u003e About 5 minutes of stereo recording (up to 5.8 minutes maximum).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it store presets?\u003c\/strong\u003e No — it works like a board of stompboxes: each section is switched on and off, and settings are set with the knobs rather than saved as presets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it help with feedback on stage?\u003c\/strong\u003e Yes — automatic feedback suppression detects and notches out feedback, and the phase switch helps with low-frequency feedback problems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty?\u003c\/strong\u003e T-Rex offers a 2-year warranty on its products.\u003c\/p\u003e","brand":"T-Rex","offers":[{"title":"Default Title","offer_id":43638180872445,"sku":"811059010366","price":829.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/t-rex-soulmate-acoustic-front.jpg?v=1785529065"},{"product_id":"t-rex-creamer-reverb","title":"T-Rex Creamer Reverb Pedal, Spring\/Room\/Hall Modes, Analog Dry Path","description":"\u003cp\u003eThree lush reverb algorithms in a compact, simple-to-use pedal — Spring for classic surf and country twang, Room for tight ambience, and Hall for big cinematic space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich T-Rex reverb is this?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Creamer is T-Rex's dedicated compact reverb pedal — three reverb modes, a Tone control for shaping the wet signal, and a fully analog dry path that keeps your guitar tone intact. The Creamer never digitizes your dry guitar signal: the reverb is mixed into it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose this pedal\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThree reverb algorithms — Spring, Room, and Hall — accessed with a single 3-way switch.\u003c\/li\u003e\n\u003cli\u003eAnalog dry signal path preserves your guitar's core tone and dynamic response.\u003c\/li\u003e\n\u003cli\u003eTone control shapes the top end of the reverb without affecting the dry signal.\u003c\/li\u003e\n\u003cli\u003eSmall footprint — fits into tight pedalboard spots.\u003c\/li\u003e\n\u003cli\u003e9V DC operation, with a 9V battery for backup use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReverb — mix of the wet reverb signal against the dry signal.\u003c\/li\u003e\n\u003cli\u003eDecay — length of the reverb tail.\u003c\/li\u003e\n\u003cli\u003eTone — high-frequency shape of the reverb (rolls off darker or opens up brighter).\u003c\/li\u003e\n\u003cli\u003e3-way mode switch — Spring \/ Room \/ Hall.\u003c\/li\u003e\n\u003cli\u003eFootswitch — turns the reverb on and off.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eReverb modes\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRoom — a small studio, rehearsal room or club.\u003c\/li\u003e\n\u003cli\u003eSpring — the reverb tank of a vintage guitar amp; a usable stand-in for an amp without built-in reverb.\u003c\/li\u003e\n\u003cli\u003eHall — a larger concert space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMono input and output jacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e, center-negative; accepts \u003cstrong\u003e8.5–12.5V DC\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eCurrent draw \u003cstrong\u003e70 mA\u003c\/strong\u003e at 9V DC.\u003c\/li\u003e\n\u003cli\u003e9V (6F22) battery capable — battery life is \u003cstrong\u003e30–60 minutes\u003c\/strong\u003e, so a regulated supply is the everyday choice.\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003cli\u003ePlace the Creamer near the end of the signal path, after drives and modulation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eT-Rex Creamer Reverb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect type\u003c\/th\u003e\n\u003ctd\u003eReverb (Spring \/ Room \/ Hall)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCircuit\u003c\/th\u003e\n\u003ctd\u003eAnalog dry path, digital reverb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControls\u003c\/th\u003e\n\u003ctd\u003eReverb, Decay, Tone, 3-way mode switch, on\/off footswitch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput \/ output\u003c\/th\u003e\n\u003ctd\u003eMono 1\/4\" in, mono 1\/4\" out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; \u003cstrong\u003e1 MΩ\u003c\/strong\u003e at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput impedance\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; \u003cstrong\u003e1 kΩ\u003c\/strong\u003e at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax input level\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e4 Vp-p\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative (\u003cstrong\u003e8.5–12.5V\u003c\/strong\u003e) or 9V battery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e70 mA\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBattery life\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e30–60 minutes\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (incl. knobs)\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4.5 × 2.4 × 2 in\u003c\/strong\u003e (\u003cstrong\u003e115 × 60 × 50 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9.5 oz\u003c\/strong\u003e (\u003cstrong\u003e250 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it compare to the Fat Shuga?\u003c\/strong\u003e The Creamer is a reverb-only pedal with three modes plus Decay and Tone controls. The Fat Shuga combines a creamy overdrive\/boost (Cream control) with a reverb that switches between Room and Hall. Choose the Creamer for more reverb shaping, the Fat Shuga if you also want drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the reverb analog?\u003c\/strong\u003e The dry signal path is fully analog. The reverb itself is generated digitally and mixed into the analog dry signal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I run it on a battery?\u003c\/strong\u003e Yes, but a 9V battery lasts only \u003cstrong\u003e30–60 minutes\u003c\/strong\u003e in the Creamer. Treat it as a backup and use a regulated 9V DC supply for regular playing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a power supply included?\u003c\/strong\u003e No. Use a 9V DC center-negative supply that can deliver at least 70 mA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it stereo?\u003c\/strong\u003e No — the Creamer has a mono input and a mono output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should it sit in my signal chain?\u003c\/strong\u003e Late in the chain — after drives, modulation, and delay when running in series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty?\u003c\/strong\u003e 2-year manufacturer warranty.\u003c\/p\u003e","brand":"T-Rex","offers":[{"title":"Default Title","offer_id":43638192701693,"sku":"811059010922","price":149.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/t-rex-creamer-reverb-front.jpg?v=1785529070"},{"product_id":"t-rex-replicator-dluxe-tape-delay","title":"T-Rex Replicator D'Luxe Tape Echo Pedal, Real Tape, 2 Playback Heads, Tap Tempo","description":"\u003cp\u003eA genuine tape echo — not an emulation, not a digital model. The Replicator D'Luxe runs real tape past one record head and two playback heads for authentic warmth, wow, and flutter that only real tape can produce.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose this pedal\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReal moving tape — an actual tape cassette passes over recording and playback heads for authentic tape-echo warmth.\u003c\/li\u003e\n\u003cli\u003eOne record head plus two switchable playback heads: Short (\u003cstrong\u003e108–520 ms\u003c\/strong\u003e) for slapback and Long (\u003cstrong\u003e215–1000 ms\u003c\/strong\u003e) for longer echoes; combine both for a more complex, room-like echo.\u003c\/li\u003e\n\u003cli\u003eTap tempo sets the Long head's time; the Short head runs at half of the Long head's time for rhythmic multi-head effects.\u003c\/li\u003e\n\u003cli\u003eNoiseless belt drive with a new motor suspension, plus a tape lock\/release mechanism that protects the pinch roller and tape and extends their life.\u003c\/li\u003e\n\u003cli\u003eAll-analog signal path from input to output, with true bypass on gold-plated relay switching.\u003c\/li\u003e\n\u003cli\u003eHandcrafted in Denmark.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelay Time\u003c\/strong\u003e — sets echo time; interacts with the head selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeedback\u003c\/strong\u003e — number of repeats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelay Level\u003c\/strong\u003e — mix of the echoed signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaturation\u003c\/strong\u003e (rear panel) — drives the tape circuit harder for gritty repeats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort\u003c\/strong\u003e head switch — engages the short playback head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong\u003c\/strong\u003e head switch — engages the long playback head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKill Dry\u003c\/strong\u003e switch — mutes the dry signal for wet-only, parallel use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn\/Off\u003c\/strong\u003e footswitch — engages the effect.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap\u003c\/strong\u003e footswitch — sets the Long head time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" input, 1\/4\" output and DC inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12V DC center-negative\u003c\/strong\u003e, current draw \u003cstrong\u003e300 mA\u003c\/strong\u003e at 12 V DC.\u003c\/li\u003e\n\u003cli\u003eUniversal power supply included, with exchangeable plugs for \u003cstrong\u003e90–240 V\u003c\/strong\u003e mains.\u003c\/li\u003e\n\u003cli\u003eNo battery operation — the tape motor requires the external supply.\u003c\/li\u003e\n\u003cli\u003eKill Dry lets you run it wet-only in a parallel effects loop.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplicator D'Luxe Tape Echo\u003c\/li\u003e\n\u003cli\u003e12V DC power supply with exchangeable mains plugs\u003c\/li\u003e\n\u003cli\u003eOne extra tape cartridge (\u003cstrong\u003e2\u003c\/strong\u003e cassettes in total)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eT-Rex Replicator D'Luxe Tape Echo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect type\u003c\/th\u003e\n\u003ctd\u003eGenuine tape echo delay (mechanical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeads\u003c\/th\u003e\n\u003ctd\u003e1 record head, 2 playback heads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDelay time\u003c\/th\u003e\n\u003ctd\u003eShort head \u003cstrong\u003e108–520 ms\u003c\/strong\u003e; Long head \u003cstrong\u003e215–1000 ms\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal path\u003c\/th\u003e\n\u003ctd\u003eAll analog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControls\u003c\/th\u003e\n\u003ctd\u003eDelay Time, Feedback, Delay Level, Saturation, Kill Dry, Short, Long, On\/Off, Tap Tempo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBypass\u003c\/th\u003e\n\u003ctd\u003eTrue bypass (gold-plated relay)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; \u003cstrong\u003e500 kΩ\u003c\/strong\u003e (at 1 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput impedance\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; \u003cstrong\u003e1 kΩ\u003c\/strong\u003e (at 1 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum input signal\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8.7 Vp-p\u003c\/strong\u003e (\u003cstrong\u003e12 dBu\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e12V DC\u003c\/strong\u003e center-negative, PSU included (\u003cstrong\u003e90–240 V\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e300 mA\u003c\/strong\u003e at 12 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJacks\u003c\/th\u003e\n\u003ctd\u003eInput, output, DC inlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTape\u003c\/th\u003e\n\u003ctd\u003eC30 1\/8\" chrome cassette; \u003cstrong\u003e2\u003c\/strong\u003e included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W × H × D, incl. knobs)\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.15 × 6.85 × 6.89 in\u003c\/strong\u003e (\u003cstrong\u003e80 × 174 × 175 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.3 lb\u003c\/strong\u003e (\u003cstrong\u003e1.50 kg\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of manufacture\u003c\/th\u003e\n\u003ctd\u003eDenmark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a real tape echo?\u003c\/strong\u003e Yes — physical tape runs across a record head and two playback heads, producing genuine analog tape-echo behavior. It is not a digital emulation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat delay times does it cover?\u003c\/strong\u003e The Short head covers 108–520 ms (slapback), the Long head 215–1000 ms. Engaging both gives a denser, room-like echo.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does tap tempo work?\u003c\/strong\u003e Tapping sets the Long head's time; the Short head automatically runs at half that time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre spare tapes included?\u003c\/strong\u003e Yes — one extra tape cartridge comes in the box, so you get two in total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it in a parallel effects loop?\u003c\/strong\u003e Yes — engage Kill Dry to mute the dry path for wet-only use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it run on a battery or a 9 V pedal supply?\u003c\/strong\u003e No — it needs 12 V DC, center-negative, at 300 mA. The included universal supply covers 90–240 V mains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is new compared with the original Replicator?\u003c\/strong\u003e A noiseless belt drive with new motor suspension, a tape lock\/release mechanism that protects the pinch roller and tape, and a streamlined control layout with tap tempo.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty?\u003c\/strong\u003e T-Rex offers a 2-year warranty on its products.\u003c\/p\u003e","brand":"T-Rex","offers":[{"title":"Default Title","offer_id":43638226714877,"sku":"811059010380","price":649.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/t-rex-replicator-dluxe-front.jpg?v=1785529077"},{"product_id":"hotone-ampero-ii-stomp-mp-300-amp-modeler","title":"Hotone Ampero II Stomp MP-300 Amp Modeler \u0026 Multi-Effects Pedal, 4\" Touchscreen, 5-Pin MIDI","description":"\u003cp\u003e\u003cstrong\u003eThe Hotone Ampero II Stomp MP-300 packs the same 460-effect Ampero II engine into the smallest, lightest board-mount chassis in the line, with stereo inputs and outputs, a stereo FX loop, 5-pin MIDI and an 8-in\/8-out USB audio interface.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAmpero II Stomp runs on a tri-core DSP platform with ESS Sabre AD\/DA converters and Hotone's CDCM HD and F.I.R.E. modeling. Patches are built on a dual effect chain with serial or parallel routing and edited on a 4\" 800 x 480 touchscreen, with three quick-access knobs under the screen, or in the free Ampero II software for Mac and Windows.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Ampero II Stomp\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e460\u003c\/strong\u003e effects (incl. global EQ) across \u003cstrong\u003e16\u003c\/strong\u003e modules with \u003cstrong\u003e12\u003c\/strong\u003e simultaneous slots and \u003cstrong\u003e300\u003c\/strong\u003e patches – the same processing depth as Ampero II Stage and Ampero II, in a smaller enclosure.\u003c\/li\u003e\n\u003cli\u003eSmallest and lightest of the three second-generation processors at \u003cstrong\u003e1050 g\u003c\/strong\u003e and \u003cstrong\u003e185 x 145 x 58 mm\u003c\/strong\u003e, so it drops onto a compact board where Stage or Ampero II would not fit.\u003c\/li\u003e\n\u003cli\u003eUp to \u003cstrong\u003e3\u003c\/strong\u003e scenes per patch for switching effect and parameter combinations inside one patch.\u003c\/li\u003e\n\u003cli\u003eSpeaker IR loader: \u003cstrong\u003e20\u003c\/strong\u003e Celestion IRs included, plus up to \u003cstrong\u003e50\u003c\/strong\u003e user IRs (24-bit\/44.1 kHz mono WAV, 1024 or 2048 points).\u003c\/li\u003e\n\u003cli\u003eStereo looper with up to \u003cstrong\u003e60\u003c\/strong\u003e seconds of recording and undo\/redo.\u003c\/li\u003e\n\u003cli\u003eEXP\/CTRL jack is made for Ampero Press or Ampero Switch, and MIDI IN is made for Ampero Control.\u003c\/li\u003e\n\u003cli\u003eStandard 5-pin MIDI in and out\/thru and 2 x 1\/4\" TRS balanced outputs, for players who prefer conventional studio and stage connectors.\u003c\/li\u003e\n\u003cli\u003eLower current draw than Stage or Ampero II at \u003cstrong\u003e800 mA\u003c\/strong\u003e max (9V), easier on a compact pedalboard power supply.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\"\u003c\/strong\u003e 800 x 480 color touchscreen – full patch\/effect editing on the unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\u003c\/strong\u003e assignable footswitches with halo LEDs – patch change, effect on\/off, tap tempo.\u003c\/li\u003e\n\u003cli\u003eVOLUME knob, MENU\/VALUE knob and \u003cstrong\u003e3\u003c\/strong\u003e quick-access knobs for the parameters shown on screen.\u003c\/li\u003e\n\u003cli\u003eIndividual input-mode setting per input: E.GT (electric guitar or bass), A.GT (acoustic) or Line.\u003c\/li\u003e\n\u003cli\u003eRear-panel power switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs\u003c\/strong\u003e – 2 x 1\/4\" TS (L\/mono and R), E.GT \u003cstrong\u003e1 MΩ\u003c\/strong\u003e \/ A.GT \u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e \/ LINE \u003cstrong\u003e10 kΩ\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e – 2 x 1\/4\" TRS balanced (L\/mono and R), \u003cstrong\u003e1 kΩ\u003c\/strong\u003e; no XLR.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX loop\u003c\/strong\u003e – stereo send and return on 1\/4\" TRS jacks (return \u003cstrong\u003e100 kΩ\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEXP\/CTRL\u003c\/strong\u003e – 1\/4\" TRS for an expression pedal or momentary footswitch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMIDI\u003c\/strong\u003e – 5-pin MIDI IN and MIDI OUT\/THRU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAux In\u003c\/strong\u003e – 1\/8\" stereo (\u003cstrong\u003e10 kΩ\u003c\/strong\u003e); \u003cstrong\u003ePhones\u003c\/strong\u003e – 1\/8\" stereo (\u003cstrong\u003e47 Ω\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e – USB 2.0 Type-C, USB Audio 2.0, \u003cstrong\u003e8\u003c\/strong\u003e-in\/\u003cstrong\u003e8\u003c\/strong\u003e-out audio interface with reamp support; firmware updates and editing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e – \u003cstrong\u003e9-18V DC\u003c\/strong\u003e center-negative, \u003cstrong\u003e800 mA\u003c\/strong\u003e max at 9V. Use the included power adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAmpero II Stomp processor\u003c\/li\u003e\n\u003cli\u003ePower adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAmpero II Stomp (MP-300)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eAmp modeler \/ multi-effects processor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScreen\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4\"\u003c\/strong\u003e \u003cstrong\u003e800 x 480\u003c\/strong\u003e color touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects \/ modules \/ slots \/ patches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e460\u003c\/strong\u003e (incl. global EQ) \/ \u003cstrong\u003e16\u003c\/strong\u003e \/ \u003cstrong\u003e12\u003c\/strong\u003e \/ \u003cstrong\u003e300\u003c\/strong\u003e (100 banks x 3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3\u003c\/strong\u003e assignable, halo LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProcessing\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\u003c\/strong\u003e \/ \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e, \u003cstrong\u003e127 dB\u003c\/strong\u003e max dynamic range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIR support\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e50\u003c\/strong\u003e user IRs + \u003cstrong\u003e20\u003c\/strong\u003e Celestion IRs; 1024\/2048 points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLooper\u003c\/th\u003e\n\u003ctd\u003eStereo, \u003cstrong\u003e60 s\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInputs\u003c\/th\u003e\n\u003ctd\u003e2 x 1\/4\" TS; 1\/8\" Aux In; 1\/4\" TRS EXP\/CTRL; stereo FX return\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e2 x 1\/4\" TRS balanced; stereo FX send; 1\/8\" headphones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMIDI\u003c\/th\u003e\n\u003ctd\u003e5-pin MIDI IN + MIDI OUT\/THRU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Type-C, USB Audio 2.0, 8 in \/ 8 out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003eE.GT \u003cstrong\u003e1 MΩ\u003c\/strong\u003e \/ A.GT \u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e \/ LINE \u003cstrong\u003e10 kΩ\u003c\/strong\u003e; FX return \u003cstrong\u003e100 kΩ\u003c\/strong\u003e; Aux \u003cstrong\u003e10 kΩ\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput impedance\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1 kΩ\u003c\/strong\u003e (main, FX send); headphones \u003cstrong\u003e47 Ω\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9-18V DC\u003c\/strong\u003e center-negative\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e800 mA\u003c\/strong\u003e max at 9V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e7.3 x 5.7 x 2.3 in\u003c\/strong\u003e (\u003cstrong\u003e185 x 145 x 58 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e2.3 lb\u003c\/strong\u003e (\u003cstrong\u003e1050 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e \u003cstrong\u003e9-18V DC\u003c\/strong\u003e center-negative, drawing up to \u003cstrong\u003e800 mA\u003c\/strong\u003e at 9V. A power adapter is included, and using it is recommended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is Ampero II Stomp different from Ampero II Stage?\u003c\/strong\u003e Stomp is smaller and lighter (\u003cstrong\u003e1050 g\u003c\/strong\u003e vs \u003cstrong\u003e1895 g\u003c\/strong\u003e) with a 4\" screen instead of 5\", three footswitches instead of eight, 5-pin MIDI instead of 1\/8\" TRS MIDI, TRS balanced outputs instead of XLR, and no mic preamp or Bluetooth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pedals and controllers work with it?\u003c\/strong\u003e The EXP\/CTRL jack takes Ampero Press or Ampero Switch, and the 5-pin MIDI IN is made for Ampero Control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many effect slots can I use at once?\u003c\/strong\u003e \u003cstrong\u003e12\u003c\/strong\u003e simultaneous effect slots on a dual chain with serial or parallel routing, drawn from a library of \u003cstrong\u003e460\u003c\/strong\u003e effects across \u003cstrong\u003e16\u003c\/strong\u003e modules.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I record with it?\u003c\/strong\u003e Yes. The USB-C port is an \u003cstrong\u003e8\u003c\/strong\u003e-in\/\u003cstrong\u003e8\u003c\/strong\u003e-out USB Audio 2.0 interface with reamp support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it with bass or acoustic guitar?\u003c\/strong\u003e Yes. Each input can be set to E.GT (electric guitar or bass), A.GT (acoustic) or Line.\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"MP-300","offer_id":43901213835517,"sku":"888506050084","price":699.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/hotone-ampero-ii-stomp-front-lit-switch.jpg?v=1785939858"},{"product_id":"hotone-ampero-one-mp-80-amp-modeler","title":"Hotone Ampero One MP-80 Amp Modeler \u0026 Multi-Effects, 4\" Touchscreen, Built-In EXP Pedal","description":"\u003cp\u003e\u003cstrong\u003eThe Hotone Ampero One MP-80 gives you a built-in expression pedal, three footswitches and 242 effects in a 9V floor unit with a 4\" touchscreen and USB audio.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAmpero One is built on Hotone's CDCM HD and F.I.R.E. modeling: \u003cstrong\u003e64\u003c\/strong\u003e amp models, \u003cstrong\u003e60\u003c\/strong\u003e cab models, more than \u003cstrong\u003e100\u003c\/strong\u003e pedal models and over \u003cstrong\u003e50\u003c\/strong\u003e Hotone original effects, with up to \u003cstrong\u003e9\u003c\/strong\u003e effect modules running at once. Patches are edited on the touchscreen or in the free Ampero Editor for Mac and Windows.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Ampero One\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in expression pedal plus an external TRS expression\/controller jack – no external expression pedal required to get started.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e242\u003c\/strong\u003e effects across \u003cstrong\u003e9\u003c\/strong\u003e effect modules and \u003cstrong\u003e198\u003c\/strong\u003e patches (\u003cstrong\u003e99\u003c\/strong\u003e user + \u003cstrong\u003e99\u003c\/strong\u003e factory) give you a broad palette in a compact floor unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\u003c\/strong\u003e assignable footswitches with halo LEDs for patch changes, effect on\/off and tap tempo.\u003c\/li\u003e\n\u003cli\u003e9V DC power (\u003cstrong\u003e500 mA\u003c\/strong\u003e max), the same supply voltage as Ampero Mini, so it is easy to power from a standard pedalboard supply with enough current.\u003c\/li\u003e\n\u003cli\u003eWorks with the optional Ampero Switch dual footswitch: in Dual FS mode its two buttons are assigned as FS4 TAP and FS5 TAP.\u003c\/li\u003e\n\u003cli\u003eUser IR loader with third-party IR support, mic type and position simulation, and built-in acoustic simulation presets.\u003c\/li\u003e\n\u003cli\u003eLooper up to \u003cstrong\u003e100 s\u003c\/strong\u003e mono or \u003cstrong\u003e50 s\u003c\/strong\u003e stereo, a drum machine with \u003cstrong\u003e100\u003c\/strong\u003e rhythm patterns, and a built-in tuner.\u003c\/li\u003e\n\u003cli\u003eSound Clone in firmware V3.1: import up to \u003cstrong\u003e10\u003c\/strong\u003e clone files through Ampero Editor into the FX 1, FX 2 or AMP module and use one at a time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" 800 x 480\u003c\/strong\u003e color touchscreen – full patch and effect editing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\u003c\/strong\u003e assignable footswitches with halo LEDs – patch change, effect on\/off, tap tempo.\u003c\/li\u003e\n\u003cli\u003eBuilt-in expression pedal (EXP 1) – volume, wah or any assigned parameter.\u003c\/li\u003e\n\u003cli\u003eExternal expression\/controller jack – a second expression pedal or a footswitch such as Ampero Switch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e – 1\/4\" TS instrument jack, \u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e, for electric guitar, bass or acoustic instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAux In\u003c\/strong\u003e – 1\/8\" stereo (\u003cstrong\u003e10 kΩ\u003c\/strong\u003e) for backing tracks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e – 2 x 1\/4\" TS unbalanced stereo outputs (\u003cstrong\u003e3.2 kΩ\u003c\/strong\u003e); 1\/8\" headphone output (\u003cstrong\u003e66 Ω\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEXP\u003c\/strong\u003e – 1\/4\" TRS expression\/footswitch input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e – USB Type-B: USB audio interface, editing with Ampero Editor, IR loading and firmware updates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e – \u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, \u003cstrong\u003e500 mA\u003c\/strong\u003e max, 5.5 x 2.1 mm barrel. No battery operation.\u003c\/li\u003e\n\u003cli\u003eNo MIDI jacks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAmpero One processor\u003c\/li\u003e\n\u003cli\u003e9V DC power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAmpero One (MP-80)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eAmp modeler \/ multi-effects floor processor with built-in expression pedal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e242\u003c\/strong\u003e (\u003cstrong\u003e64\u003c\/strong\u003e amps, \u003cstrong\u003e60\u003c\/strong\u003e cabs, \u003cstrong\u003e100+\u003c\/strong\u003e pedal models, \u003cstrong\u003e50+\u003c\/strong\u003e Hotone originals)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModules \/ patches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9\u003c\/strong\u003e simultaneous \/ \u003cstrong\u003e198\u003c\/strong\u003e (\u003cstrong\u003e99\u003c\/strong\u003e user + \u003cstrong\u003e99\u003c\/strong\u003e factory)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScreen\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4\"\u003c\/strong\u003e \u003cstrong\u003e800 x 480\u003c\/strong\u003e color touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3\u003c\/strong\u003e assignable, halo LEDs; built-in expression pedal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProcessing\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\u003c\/strong\u003e \/ \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e, \u003cstrong\u003e120 dB\u003c\/strong\u003e S\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIR support\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\/44.1 kHz\u003c\/strong\u003e mono WAV, \u003cstrong\u003e1024\u003c\/strong\u003e points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLooper\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e100 s\u003c\/strong\u003e mono \/ \u003cstrong\u003e50 s\u003c\/strong\u003e stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrum machine\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e100\u003c\/strong\u003e rhythm patterns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInputs\u003c\/th\u003e\n\u003ctd\u003e1\/4\" TS instrument (\u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e); 1\/8\" Aux In (\u003cstrong\u003e10 kΩ\u003c\/strong\u003e); 1\/4\" TRS EXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e2 x 1\/4\" TS unbalanced (\u003cstrong\u003e3.2 kΩ\u003c\/strong\u003e); 1\/8\" headphones (\u003cstrong\u003e66 Ω\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eUSB Type-B, USB audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMIDI\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, 5.5 x 2.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e500 mA\u003c\/strong\u003e max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e10.7 x 5.6 x 2.0 in\u003c\/strong\u003e (\u003cstrong\u003e273 x 143 x 51 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e2.65 lb\u003c\/strong\u003e (\u003cstrong\u003e1202 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does Ampero One need?\u003c\/strong\u003e \u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative with at least \u003cstrong\u003e500 mA\u003c\/strong\u003e, on a 5.5 x 2.1 mm plug. A 9V adapter is included; there is no battery option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it have a built-in expression pedal?\u003c\/strong\u003e Yes. The expression pedal is built into the chassis, and a separate 1\/4\" TRS jack accepts a second expression pedal or an external footswitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich footswitch can I add?\u003c\/strong\u003e The Ampero Switch dual footswitch: plug it into the external expression\/footswitch jack, set the jack mode to Dual FS, and assign functions to FS4 TAP and FS5 TAP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it have MIDI?\u003c\/strong\u003e No, Ampero One has no MIDI jacks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Ampero One support captured amp tones?\u003c\/strong\u003e Firmware V3.1 adds Sound Clone: up to \u003cstrong\u003e10\u003c\/strong\u003e clone files can be imported through Ampero Editor into the FX 1, FX 2 or AMP module, with one usable at a time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I record with it?\u003c\/strong\u003e Yes. The USB Type-B port works as a USB audio interface, and the same connection is used for Ampero Editor, IR loading and firmware updates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it work with bass and acoustic guitar?\u003c\/strong\u003e Yes. The \u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e input suits electric guitar, bass and acoustic instruments, and the unit includes acoustic simulation presets. There is no input mode selector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between Ampero One and Ampero Mini?\u003c\/strong\u003e Ampero One has more effects (\u003cstrong\u003e242\u003c\/strong\u003e vs \u003cstrong\u003e199\u003c\/strong\u003e), three footswitches, a built-in expression pedal and two TS outputs; Ampero Mini is much smaller (\u003cstrong\u003e529 g\u003c\/strong\u003e) with a single TRS stereo output and USB-C. Both run on \u003cstrong\u003e9V DC\u003c\/strong\u003e, \u003cstrong\u003e500 mA\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"Default Title","offer_id":43918756249853,"sku":"888506050046","price":419.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/hotone-ampero-one-effect-grid-screen.jpg?v=1785939881"},{"product_id":"hotone-ampero-switch-fs-1-footswitch","title":"Hotone FS-1 Ampero Switch Dual Momentary Footswitch, Aluminum, 80 cm TRS Cable Included","description":"\u003cp\u003e\u003cstrong\u003eThe Hotone Ampero Switch adds two extra momentary footswitches to an Ampero-family unit's external control jack, so you get looper, tap tempo, or bank-up\/down control without reaching for the touchscreen mid-song.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing is the same brushed aluminum alloy used on the original Ampero series, and the switches are chosen for comfortable action and long service life. It also works with other devices that have an external control jack and support momentary footswitch controllers; the available functions depend on the host device.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Ampero Switch\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade for the Ampero family: Ampero, Ampero One and Ampero Mini all support it on their external pedal jacks, and Ampero Control accepts it on either EXP\/CTRL jack.\u003c\/li\u003e\n\u003cli\u003eComes with an \u003cstrong\u003e80 cm\u003c\/strong\u003e TRS cable in the box, so there is no separate cable purchase to get it working.\u003c\/li\u003e\n\u003cli\u003eAssign each switch independently: Looper Rec\/Play, Looper Stop, Drum On\/Off, Tuner, Bank +\/-, Tap Tempo, Patch +\/-, EXP On\/Off, and individual FX-module on\/off are all assignable on Ampero.\u003c\/li\u003e\n\u003cli\u003eBank switching in Wait mode lets you preselect a bank while the current patch keeps playing, then confirm with a footswitch.\u003c\/li\u003e\n\u003cli\u003eUltra-compact and light at \u003cstrong\u003e130 g\u003c\/strong\u003e in a durable aluminum housing, so it barely adds bulk to a pedalboard.\u003c\/li\u003e\n\u003cli\u003eFully passive: no power supply, no battery, just a single TRS connection to your host's external pedal jack.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootswitch A\u003c\/strong\u003e – assignable momentary switch (FS5 TAP on Ampero, FS4 TAP on Ampero One; Bank - by default).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootswitch B\u003c\/strong\u003e – assignable momentary switch (FS6 TAP on Ampero, FS5 TAP on Ampero One; Bank + by default).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Setup\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e – one 1\/4\" (6.35 mm) TRS cable (included, \u003cstrong\u003e80 cm\u003c\/strong\u003e) to the host's external pedal\/footswitch jack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmpero \/ Ampero One\u003c\/strong\u003e – plug into EXP 2\/FS, then set GLOBAL \u0026gt; EXP2\/FS \u0026gt; MODE to Dual FS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmpero Mini\u003c\/strong\u003e – plug into EXP\/CTRL (FS 3\/4) and select Dual FS in the EXP\/FS menu.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmpero Control\u003c\/strong\u003e – plug into EXP\/CTRL 1 or 2 and set Type to Dual FS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e – none required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAmpero Switch footswitch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 cm\u003c\/strong\u003e 1\/4\" TRS cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAmpero Switch (FS-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePassive dual momentary footswitch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e2\u003c\/strong\u003e momentary (A and B)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003ctd\u003e1\/4\" TRS to host external pedal jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable included\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e80 cm\u003c\/strong\u003e (\u003cstrong\u003e31.5 in\u003c\/strong\u003e) TRS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eBrushed aluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eNone required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.9 x 1.6 x 1.7 in\u003c\/strong\u003e (\u003cstrong\u003e100 x 40 x 42 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4.6 oz\u003c\/strong\u003e (\u003cstrong\u003e130 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Hotone devices work with Ampero Switch?\u003c\/strong\u003e Ampero, Ampero One, Ampero Mini and Ampero Control. It also works with other devices that have an external control jack and support momentary footswitch controllers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy a cable separately?\u003c\/strong\u003e No, an \u003cstrong\u003e80 cm\u003c\/strong\u003e TRS cable is included in the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between Ampero Switch and Ampero Switch+ (FS-2)?\u003c\/strong\u003e Ampero Switch is the original dual momentary footswitch in the first-generation Ampero finish, \u003cstrong\u003e100 x 40 x 42 mm\u003c\/strong\u003e and \u003cstrong\u003e130 g\u003c\/strong\u003e. Ampero Switch+ has a sloped, anti-tip white aluminum-alloy case matching Ampero II Stomp\/Stage, at \u003cstrong\u003e102 x 63.5 x 49.6 mm\u003c\/strong\u003e and \u003cstrong\u003e190 g\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I set it up on Ampero or Ampero One?\u003c\/strong\u003e Connect to the EXP 2\/FS jack, then set GLOBAL \u0026gt; EXP2\/FS \u0026gt; MODE to Dual FS in the device menu and assign functions to footswitches A and B.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I assign looper or tuner functions to the switches?\u003c\/strong\u003e Yes, assignable functions on Ampero include Looper Rec\/Play, Looper Stop, Drum, Tuner, Bank +\/-, Tap Tempo, Patch +\/-, EXP On\/Off, and per-module FX on\/off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it need power?\u003c\/strong\u003e No. It is a passive switch with no DC jack or battery; a single TRS cable to the host is the whole setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this work with Ampero II Stomp or Stage?\u003c\/strong\u003e The model designed for the Ampero II series is Ampero Switch+ (FS-2); Ampero Switch is a momentary dual footswitch and works with hosts that support a dual momentary footswitch on their control jack.\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"Default Title","offer_id":43918768996605,"sku":"888506080043","price":29.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/hotone-ampero-switch-dual-footswitch-front.jpg?v=1785939757"},{"product_id":"hotone-ampero-mp-100-amp-modeler","title":"Hotone Ampero MP-100 Amp Modeler \u0026 Multi-Effects Processor, 4\" Touchscreen, XLR Outs, EXP Pedal","description":"\u003cp\u003e\u003cstrong\u003eThe Hotone Ampero MP-100 is the original full-size Ampero floor processor: more than 240 amp, cab and effect models, XLR balanced outs, a built-in expression pedal and 5-pin MIDI In, running on an 18V supply instead of the 9V used by Ampero Mini.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAmpero is built around Hotone's CDCM HD and F.I.R.E. modeling: \u003cstrong\u003e64\u003c\/strong\u003e amp models, \u003cstrong\u003e60\u003c\/strong\u003e cab models, more than \u003cstrong\u003e100\u003c\/strong\u003e pedal models and over \u003cstrong\u003e50\u003c\/strong\u003e Hotone original effects, with up to \u003cstrong\u003e9\u003c\/strong\u003e effect modules running at once. Patches are edited on a 4\" color touchscreen or in the free Ampero Editor for Mac and PC, and the unit doubles as a USB audio interface for recording.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Ampero\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLarge effect library: more than \u003cstrong\u003e240\u003c\/strong\u003e effects across \u003cstrong\u003e9\u003c\/strong\u003e simultaneous modules and \u003cstrong\u003e198\u003c\/strong\u003e patches (\u003cstrong\u003e99\u003c\/strong\u003e user + \u003cstrong\u003e99\u003c\/strong\u003e factory).\u003c\/li\u003e\n\u003cli\u003eFull XLR balanced outputs with ground-lift switching, alongside 2 x 1\/4\" TS unbalanced outs, for the cleanest connection to a mixing board or interface.\u003c\/li\u003e\n\u003cli\u003eStandard 5-pin MIDI In, so it can be switched from a MIDI controller such as Ampero Control (EC-4) by connecting the controller's MIDI OUT\/THRU to Ampero's MIDI IN.\u003c\/li\u003e\n\u003cli\u003eBuilt-in expression pedal plus an EXP 2\/FS jack for an external expression pedal or the Ampero Switch dual footswitch.\u003c\/li\u003e\n\u003cli\u003eUser IR loader with third-party IR support (\u003cstrong\u003e20\u003c\/strong\u003e user IR slots), plus microphone type and position simulation.\u003c\/li\u003e\n\u003cli\u003eBuilt-in looper (up to \u003cstrong\u003e100\u003c\/strong\u003e seconds mono or \u003cstrong\u003e50\u003c\/strong\u003e seconds stereo, pre- or post-effects, with reverse and half-speed) and a drum machine with \u003cstrong\u003e100\u003c\/strong\u003e rhythm patterns.\u003c\/li\u003e\n\u003cli\u003eSound Clone support in current firmware: import up to \u003cstrong\u003e10\u003c\/strong\u003e clone files and use one at a time in place of the amp or drive module, managed through Ampero Editor.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" 800 x 480 color touchscreen\u003c\/strong\u003e – full patch and effect editing, with three rotary knobs for on-screen parameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume knob and Menu\/Value knob\u003c\/strong\u003e – quick level and menu control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 assignable footswitches\u003c\/strong\u003e with halo LEDs, and a built-in expression pedal (EXP 1).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-way input mode selector\u003c\/strong\u003e – electric guitar, acoustic guitar or line level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGND LIFT switch\u003c\/strong\u003e – on the balanced XLR outputs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e – 1\/4\" TS instrument jack with three-way input mode (E.GT \u003cstrong\u003e1 MΩ\u003c\/strong\u003e, A.GT \u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e, LINE \u003cstrong\u003e10 kΩ\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAux In\u003c\/strong\u003e – 1\/8\" stereo jack (\u003cstrong\u003e10 kΩ\u003c\/strong\u003e) for backing tracks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e – 2 x 1\/4\" TS unbalanced (\u003cstrong\u003e3.2 kΩ\u003c\/strong\u003e), 2 x XLR balanced with ground lift (\u003cstrong\u003e2 kΩ\u003c\/strong\u003e), 1\/8\" stereo headphones (\u003cstrong\u003e66 Ω\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEXP 2\/FS\u003c\/strong\u003e – 1\/4\" TRS jack for an expression pedal or a dual footswitch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMIDI In\u003c\/strong\u003e – standard 5-pin DIN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e – USB 2.0 Type-B, USB Audio 2.0 interface, editing and firmware updates; class compliant on macOS and Windows 10.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e – \u003cstrong\u003e18V DC\u003c\/strong\u003e center-negative, \u003cstrong\u003e500 mA\u003c\/strong\u003e max, 5.5 x 2.1 mm barrel. This is 18V, not the 9V used by Ampero Mini, so a 9V pedal supply will not run it. No battery operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAmpero processor\u003c\/li\u003e\n\u003cli\u003e18V DC power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAmpero (MP-100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eAmp modeler \u0026amp; multi-effects floor processor with built-in expression pedal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e240+\u003c\/strong\u003e (\u003cstrong\u003e64\u003c\/strong\u003e amps, \u003cstrong\u003e60\u003c\/strong\u003e cabs, \u003cstrong\u003e100+\u003c\/strong\u003e pedal models, \u003cstrong\u003e50+\u003c\/strong\u003e Hotone originals)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModules \/ patches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9\u003c\/strong\u003e simultaneous \/ \u003cstrong\u003e198\u003c\/strong\u003e (\u003cstrong\u003e99\u003c\/strong\u003e user + \u003cstrong\u003e99\u003c\/strong\u003e factory)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScreen\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4\"\u003c\/strong\u003e \u003cstrong\u003e800 x 480\u003c\/strong\u003e color touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4\u003c\/strong\u003e assignable, halo LEDs; built-in expression pedal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProcessing\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\u003c\/strong\u003e \/ \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e, \u003cstrong\u003e120 dB\u003c\/strong\u003e S\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIR support\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\/44.1 kHz\u003c\/strong\u003e mono WAV, \u003cstrong\u003e1024\u003c\/strong\u003e points; \u003cstrong\u003e20\u003c\/strong\u003e user slots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLooper\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e100 s\u003c\/strong\u003e mono \/ \u003cstrong\u003e50 s\u003c\/strong\u003e stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrum machine\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e100\u003c\/strong\u003e rhythm patterns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e2 x 1\/4\" TS unbalanced; 2 x XLR balanced with ground lift; 1\/8\" headphones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInputs\u003c\/th\u003e\n\u003ctd\u003e1\/4\" TS instrument (3 modes); 1\/8\" Aux In; 1\/4\" TRS EXP 2\/FS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMIDI\u003c\/th\u003e\n\u003ctd\u003e5-pin MIDI In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Type-B, USB Audio 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003eE.GT \u003cstrong\u003e1 MΩ\u003c\/strong\u003e \/ A.GT \u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e \/ LINE \u003cstrong\u003e10 kΩ\u003c\/strong\u003e; Aux \u003cstrong\u003e10 kΩ\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput impedance\u003c\/th\u003e\n\u003ctd\u003eUnbalanced \u003cstrong\u003e3.2 kΩ\u003c\/strong\u003e; balanced \u003cstrong\u003e2 kΩ\u003c\/strong\u003e; headphones \u003cstrong\u003e66 Ω\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e18V DC\u003c\/strong\u003e center-negative, 5.5 x 2.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e500 mA\u003c\/strong\u003e max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e12.6 x 5.8 x 1.8 in\u003c\/strong\u003e (\u003cstrong\u003e320 x 147 x 46 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.1 lb\u003c\/strong\u003e (\u003cstrong\u003e1408 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does Ampero need?\u003c\/strong\u003e \u003cstrong\u003e18V DC\u003c\/strong\u003e center-negative with at least \u003cstrong\u003e500 mA\u003c\/strong\u003e, on a 5.5 x 2.1 mm plug. An 18V adapter is included. A standard 9V pedal supply, or the 9V supply of Ampero Mini, will not run it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it have MIDI Out?\u003c\/strong\u003e No. Ampero has a 5-pin MIDI In only, so it can receive program changes and control messages from a controller such as Ampero Control, but it cannot send MIDI to other gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I add an external expression pedal or footswitch?\u003c\/strong\u003e Yes. The EXP 2\/FS jack takes an expression pedal or the Ampero Switch: connect it, then set GLOBAL \u0026gt; EXP2\/FS \u0026gt; MODE to Dual FS for the footswitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Ampero support NAM or captured amp tones?\u003c\/strong\u003e Current firmware adds Sound Clone: up to \u003cstrong\u003e10\u003c\/strong\u003e clone files can be imported with Ampero Editor and used one at a time in place of the amp or drive module. Update both the firmware and Ampero Editor to see the Sound Clone tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I record with it?\u003c\/strong\u003e Yes. The USB 2.0 Type-B port works as a USB Audio 2.0 interface; it is plug-and-play on macOS and Windows 10, and older Windows versions use the Hotone ASIO driver. A USB cable is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it have an effects loop?\u003c\/strong\u003e No. There is no send\/return loop, so the four-cable method with external pedals is not available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I plug in an acoustic guitar or a line-level source?\u003c\/strong\u003e Yes. The three-way input selector has electric guitar (\u003cstrong\u003e1 MΩ\u003c\/strong\u003e), acoustic guitar (\u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e) and line (\u003cstrong\u003e10 kΩ\u003c\/strong\u003e) modes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between Ampero and Ampero One?\u003c\/strong\u003e Ampero has a 5-pin MIDI In and a dedicated 18V supply; Ampero One has no MIDI In jack, so a MIDI controller reaches it only through USB with a Bluetooth MIDI bridge app.\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"Ampero","offer_id":43918808776957,"sku":"888506050022","price":549.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/hotone-ampero-mp-100-patch-screen-green-switches.jpg?v=1785939881"},{"product_id":"hotone-ampero-press-sp-30","title":"Hotone Ampero Press SP-30 Passive Volume\/Expression Pedal, 10kΩ EXP, Independent Outputs","description":"\u003cp\u003e\u003cstrong\u003eThe Hotone Ampero Press SP-30 is the simplest way to add a real volume-and-expression treadle to an Ampero-family processor, with no power supply to run.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAmpero Press is a compact passive 2-in-1 pedal: independent volume and expression output jacks let you control volume and an expression parameter at the same time. It is designed for Ampero series multi-effects, works with other devices that have an external EXP pedal jack, and can be used on its own as a passive volume pedal. The solid aluminum alloy casing has a black-and-gold textured finish, and a high-quality potentiometer gives precise response and long life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Ampero Press\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFully passive design: no battery, no DC jack, nothing to run out of charge mid-set – just plug it in and press.\u003c\/li\u003e\n\u003cli\u003eControl volume and expression at the same time: the EXP OUT 1\/4\" TRS jack feeds a device's expression input while the main INPUT\/OUTPUT path still carries your volume-controlled signal.\u003c\/li\u003e\n\u003cli\u003eMade for the Ampero family: Ampero Mini's EXP\/CTRL jack is described as perfect for Ampero Press, and Ampero Control accepts it on either EXP\/CTRL jack as an expression pedal.\u003c\/li\u003e\n\u003cli\u003eCompact Press-family footprint (\u003cstrong\u003e81 x 162 x 51 mm\u003c\/strong\u003e) that matches Soul Press II, Wong Press, and Ampero Press 25kΩ Edition, so it drops onto the same pedalboard real estate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 kΩ\u003c\/strong\u003e volume pot and \u003cstrong\u003e10 kΩ\u003c\/strong\u003e expression pot.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTreadle – the only control; sweeps the volume and expression pots together.\u003c\/li\u003e\n\u003cli\u003eNo footswitch, no mode switch, no LEDs – a deliberately simple, fully passive control surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Setup\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eINPUT – 1\/4\" mono jack for your instrument.\u003c\/li\u003e\n\u003cli\u003eOUTPUT – 1\/4\" mono jack to the next device (volume path).\u003c\/li\u003e\n\u003cli\u003eEXP OUT – 1\/4\" TRS jack to a device's EXP control input.\u003c\/li\u003e\n\u003cli\u003eAmpero Control – connect to EXP\/CTRL 1 or 2 with a TRS cable and set Type to EXP Pedal; the controller has an expression-pedal calibration mode.\u003c\/li\u003e\n\u003cli\u003ePower – none required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAmpero Press pedal (cables sold separately)\u003c\/li\u003e\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAmpero Press (SP-30)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePassive volume \/ expression pedal (2-in-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVolume pot\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e100 kΩ\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpression pot\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e10 kΩ\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJacks\u003c\/th\u003e\n\u003ctd\u003eINPUT, OUTPUT (1\/4\" mono), EXP OUT (1\/4\" TRS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eNone – fully passive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eAluminum alloy, black and gold textured finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.2 x 6.4 x 2.0 in\u003c\/strong\u003e (\u003cstrong\u003e81 x 162 x 51 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e15.2 oz\u003c\/strong\u003e (\u003cstrong\u003e430 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Hotone devices work with Ampero Press?\u003c\/strong\u003e It is designed for the Ampero series: Ampero Mini's EXP\/CTRL jack is made for it, and Ampero Control accepts it on EXP\/CTRL 1 or 2 as an expression pedal. It also works with other devices that have an external EXP pedal jack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Ampero Press need a power supply?\u003c\/strong\u003e No. It is a fully passive pedal – there is no DC jack and no battery compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it for both volume and expression at once?\u003c\/strong\u003e Yes. The EXP OUT jack sends an independent expression signal to a device's expression input while the pedal still controls volume through the main signal path.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this and the 25kΩ Edition (SP-30H)?\u003c\/strong\u003e They share the same housing, 100 kΩ volume pot, size and weight; the difference is the expression pot – \u003cstrong\u003e10 kΩ\u003c\/strong\u003e here versus \u003cstrong\u003e25 kΩ\u003c\/strong\u003e on the Edition, which is designed for Ampero II Stomp and other devices that require a 25 kΩ expression pedal. Choose based on your host device's expression-input rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cables do I need?\u003c\/strong\u003e Standard 1\/4\" instrument cables for INPUT and OUTPUT, and a 1\/4\" TRS (stereo) cable for EXP OUT. Cables are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a footswitch on this pedal?\u003c\/strong\u003e No. Ampero Press is treadle-only; for an expression pedal with a built-in momentary footswitch, see Ampero II Press (SP-35).\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"Default Title","offer_id":43918827192573,"sku":"888506040078","price":109.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/hotone-ampero-press-sp-30-wordmark-angled.jpg?v=1785939881"},{"product_id":"hotone-soul-press-ii-sp-20-pedal","title":"Hotone Soul Press II SP-20 Volume\/Wah\/Expression Pedal, Two Wah Voicings, True Bypass","description":"\u003cp\u003e\u003cstrong\u003eThe Hotone Soul Press II SP-20 puts volume swells, expression control, and a two-voice wah in one footswitchable pedal, so you are not carrying three separate boxes to get vocal-style sweeps out of your amp modeler.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSoul Press II builds on Hotone's original Soul Press and Vow Press with a larger treadle, a redesigned active volume circuit that keeps your tone intact, and a revised circuit for lower noise. Four functions are on board: volume, wah, switchable volume\/wah, and expression. The lightweight aluminum alloy housing has a polarized finish that shifts color with the viewing angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Soul Press II\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSkip the wah\/volume pedal shuffle: MODE switches between Volume (V), Wah (W), or a footswitch-toggled Volume\/Wah (V\/W), so one pedal covers swells and vocal sweeps.\u003c\/li\u003e\n\u003cli\u003eDial in the wah character you want: TONE selects WARM (\u003cstrong\u003e290 Hz–1.4 kHz\u003c\/strong\u003e) or CLASSIC (\u003cstrong\u003e360 Hz–1.8 kHz\u003c\/strong\u003e) voicing, and the Q knob narrows or widens that sweep.\u003c\/li\u003e\n\u003cli\u003ePlay without a power supply: Soul Press II works fully unpowered as a passive expression pedal, or runs on a 9V DC adapter or a user-installed 9V battery when you need the wah and volume circuits active.\u003c\/li\u003e\n\u003cli\u003eSend volume and expression at the same time: the EXP OUT 1\/4\" TRS jack works in any mode, so you can drive a processor's expression input while the main output still carries your signal.\u003c\/li\u003e\n\u003cli\u003eTuner routing: TUNER OUT feeds a tuner such as the Hotone Skyline Tuner and keeps it outside the effect chain.\u003c\/li\u003e\n\u003cli\u003eTrue bypass in V and W modes. In V\/W mode the footswitch toggles between active volume and active wah, so the pedal is not bypassed in that mode.\u003c\/li\u003e\n\u003cli\u003eStatus LEDs show the treadle position in real time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMODE (V \/ W \/ V-W) – chooses whether the treadle controls volume, wah, or a footswitch-selectable blend of both.\u003c\/li\u003e\n\u003cli\u003eTONE (WARM \/ CLASSIC) – sets the wah's frequency range from a rounder low-mid sweep to a brighter classic sweep.\u003c\/li\u003e\n\u003cli\u003eQ – narrows or widens the wah filter for a subtler or more vocal effect.\u003c\/li\u003e\n\u003cli\u003eFootswitch – engages\/disengages the effect, or swaps between volume and wah in V\/W mode.\u003c\/li\u003e\n\u003cli\u003eMode LED – green for V, blue for W, green\/blue for V\/W.\u003c\/li\u003e\n\u003cli\u003eHidden 3-way STATUS LED switch (in the battery compartment) – sets the position LEDs to All Off, All On, or VOL Only so the light doesn't distract you on a dark stage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eINPUT – 1\/4\" mono jack for your instrument.\u003c\/li\u003e\n\u003cli\u003eOUTPUT – 1\/4\" mono jack to the next device.\u003c\/li\u003e\n\u003cli\u003eTUNER OUT – 1\/4\" mono jack for a tuner.\u003c\/li\u003e\n\u003cli\u003eEXP OUT – 1\/4\" TRS, \u003cstrong\u003e10 kΩ\u003c\/strong\u003e, works in any mode.\u003c\/li\u003e\n\u003cli\u003eDC IN – \u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, 5.5 x 2.1 mm barrel; maximum \u003cstrong\u003e30 mA\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eBattery – one 9V battery in a compartment secured by two Phillips screws.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSoul Press II pedal (power supply sold separately)\u003c\/li\u003e\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSoul Press II (SP-20)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eVolume \/ Wah \/ Volume-Wah \/ Expression pedal (4-in-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWah range\u003c\/th\u003e\n\u003ctd\u003eWARM \u003cstrong\u003e290 Hz–1.4 kHz\u003c\/strong\u003e, CLASSIC \u003cstrong\u003e360 Hz–1.8 kHz\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEXP OUT pot\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e10 kΩ\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e1 MΩ\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput impedance\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e100 Ω\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBypass\u003c\/th\u003e\n\u003ctd\u003eTrue bypass (V and W modes); not bypassable in V\/W mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative or 9V battery; max \u003cstrong\u003e30 mA\u003c\/strong\u003e; no power needed for expression-only use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJacks\u003c\/th\u003e\n\u003ctd\u003eINPUT, OUTPUT, TUNER OUT (1\/4\" mono), EXP OUT (1\/4\" TRS), DC IN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.2 x 6.4 x 2.0 in\u003c\/strong\u003e (\u003cstrong\u003e81 x 162 x 51 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e17.6 oz\u003c\/strong\u003e (\u003cstrong\u003e500 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Soul Press II the same as the Ampero Press?\u003c\/strong\u003e No. Ampero Press (SP-30) is a fully passive volume\/expression pedal with no wah and no footswitch. Soul Press II adds a footswitchable wah voice, a TONE\/Q wah section, an active volume circuit, and 9V\/battery power for those active circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use Soul Press II with no power connected?\u003c\/strong\u003e Yes, when it is used purely as an expression pedal. You need the 9V adapter or a battery only for the volume and wah functions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between WARM and CLASSIC wah voicing?\u003c\/strong\u003e WARM sweeps \u003cstrong\u003e290 Hz–1.4 kHz\u003c\/strong\u003e for a rounder, lower-mid vocal tone. CLASSIC sweeps \u003cstrong\u003e360 Hz–1.8 kHz\u003c\/strong\u003e for a brighter, more familiar wah character. The Q knob then narrows or widens either sweep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it true bypass?\u003c\/strong\u003e Yes, in V and W modes the footswitch turns the effect on and off with true bypass. In V\/W mode the footswitch toggles between active volume and active wah, so the pedal cannot be bypassed in that mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e A \u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative adapter (5.5 x 2.1 mm barrel) rated for at least \u003cstrong\u003e30 mA\u003c\/strong\u003e, or a 9V battery. The adapter is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cable do I need for the EXP OUT jack?\u003c\/strong\u003e A 1\/4\" TRS (stereo) cable from EXP OUT to your device's expression input. EXP OUT works in any mode, alongside the main audio output.\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"Wah","offer_id":43919042707709,"sku":"888506040061","price":164.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/hotone-soul-press-ii-sp-20-angled.jpg?v=1785939858"},{"product_id":"valeton-gp-200lt-multi-effects-processor","title":"Valeton GP-200LT Multi-Effects Processor for Guitar \u0026 Bass, 4 Footswitches, Dual EXP\/FS, MIDI","description":"\u003cp\u003e\u003cstrong\u003eWant GP-200 tone at the lightest weight in the lineup?\u003c\/strong\u003e The GP-200LT trims the built-in expression pedal in favor of two external EXP\/FS jacks, keeping the full 240+ effects engine in the lightest chassis of the GP-200 family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists and bassists choose the GP-200LT\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo 1\/4\" TRS EXP\/FS jacks support up to \u003cstrong\u003e2\u003c\/strong\u003e external expression pedals or up to \u003cstrong\u003e4\u003c\/strong\u003e footswitches — flexible enough to bring your own preferred pedal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\u003c\/strong\u003e customizable LED footswitches with \u003cstrong\u003e3\u003c\/strong\u003e templates for patch and stomp control.\u003c\/li\u003e\n\u003cli\u003eA dedicated phones volume knob makes headphone practice level-adjustable without reaching for a menu.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e256\u003c\/strong\u003e patch slots (\u003cstrong\u003e100\u003c\/strong\u003e factory, \u003cstrong\u003e156\u003c\/strong\u003e user) — full parity with the flagship GP-200 despite the lighter build.\u003c\/li\u003e\n\u003cli\u003eUp to \u003cstrong\u003e11\u003c\/strong\u003e freely movable modules, \u003cstrong\u003e20\u003c\/strong\u003e user IR slots, a \u003cstrong\u003e180\u003c\/strong\u003e-second looper and \u003cstrong\u003e100\u003c\/strong\u003e drum patterns.\u003c\/li\u003e\n\u003cli\u003eUSB-C audio interface (\u003cstrong\u003e6-in\/4-out\u003c\/strong\u003e) with re-amp and loopback; the aux input routes straight to USB for streaming.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and footswitches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\u003c\/strong\u003e customizable LED footswitches, \u003cstrong\u003e3\u003c\/strong\u003e footswitch templates.\u003c\/li\u003e\n\u003cli\u003eNo built-in expression pedal; 2 x 1\/4\" TRS EXP\/FS jacks in its place.\u003c\/li\u003e\n\u003cli\u003eDedicated phones volume knob.\u003c\/li\u003e\n\u003cli\u003e4.3-inch color display (\u003cstrong\u003e480 x 272\u003c\/strong\u003e) with multi-language menus and a built-in chromatic tuner.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput: 1\/4\" TS instrument input with A.GT \/ E.GT \/ Line impedance settings (\u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e \/ \u003cstrong\u003e1 MΩ\u003c\/strong\u003e \/ \u003cstrong\u003e10 kΩ\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003eOutputs: 2 x 1\/4\" TRS balanced (L\/R, \u003cstrong\u003e1 kΩ\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003eFX loop: 1\/4\" unbalanced send and return.\u003c\/li\u003e\n\u003cli\u003e1\/8\" stereo aux input and 1\/8\" headphone output (\u003cstrong\u003e22 Ω\u003c\/strong\u003e) with its own volume knob.\u003c\/li\u003e\n\u003cli\u003eMIDI: 1\/8\" TRS MIDI IN and OUT\/THRU.\u003c\/li\u003e\n\u003cli\u003eUSB Type-C audio interface for Windows, macOS, iOS and Android; free Windows\/Mac editor.\u003c\/li\u003e\n\u003cli\u003ePower: \u003cstrong\u003e9V DC\u003c\/strong\u003e, \u003cstrong\u003e1000 mA\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eValeton GP-200LT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCompact floor multi-effects processor (GP-200 platform), no built-in expression pedal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e240+\u003c\/strong\u003e effects, incl. \u003cstrong\u003e140+\u003c\/strong\u003e amp and cab models and \u003cstrong\u003e100+\u003c\/strong\u003e stompbox effects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect chain\u003c\/th\u003e\n\u003ctd\u003eUp to \u003cstrong\u003e11\u003c\/strong\u003e simultaneous, freely movable modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUser IRs\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e20\u003c\/strong\u003e slots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePatches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e256\u003c\/strong\u003e (\u003cstrong\u003e100\u003c\/strong\u003e factory \/ \u003cstrong\u003e156\u003c\/strong\u003e user)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLooper \/ drums\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e180\u003c\/strong\u003e-second looper, \u003cstrong\u003e100\u003c\/strong\u003e drum patterns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4\u003c\/strong\u003e LED footswitches, \u003cstrong\u003e3\u003c\/strong\u003e templates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpression\u003c\/th\u003e\n\u003ctd\u003eNone built in; \u003cstrong\u003e2\u003c\/strong\u003e x 1\/4\" TRS EXP\/FS jacks (up to 2 pedals or 4 footswitches)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e2 x 1\/4\" TRS balanced, headphones 1\/8\" with volume knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFX loop\u003c\/th\u003e\n\u003ctd\u003e1\/4\" send \/ return\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMIDI\u003c\/th\u003e\n\u003ctd\u003e1\/8\" TRS IN, OUT\/THRU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eType-C audio interface, 6-in\/4-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eA\/D-D\/A\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\u003c\/strong\u003e, \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e, \u003cstrong\u003e1000 mA\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e10.0 x 6.5 x 2.2 in\u003c\/strong\u003e (\u003cstrong\u003e253 x 165 x 56 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e2.8 lb\u003c\/strong\u003e (\u003cstrong\u003e1.25 kg\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003ctd\u003eCast metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the GP-200LT have a built-in expression pedal?\u003c\/strong\u003e No — it uses two external 1\/4\" TRS EXP\/FS jacks instead, supporting up to \u003cstrong\u003e2\u003c\/strong\u003e expression pedals or \u003cstrong\u003e4\u003c\/strong\u003e footswitches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many footswitches does it have?\u003c\/strong\u003e \u003cstrong\u003e4\u003c\/strong\u003e customizable LED footswitches with \u003cstrong\u003e3\u003c\/strong\u003e footswitch templates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the MIDI connector?\u003c\/strong\u003e 1\/8\" TRS MIDI IN and OUT\/THRU, different from the 5-pin MIDI on the full-size GP-200.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the effects engine the same as the GP-200?\u003c\/strong\u003e Yes, same 240+ effects, 140+ amp\/cab models and \u003cstrong\u003e256\u003c\/strong\u003e patch slots as the full-size GP-200.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it different from the GP-200JR?\u003c\/strong\u003e GP-200LT has no built-in expression pedal (using two EXP\/FS jacks instead), \u003cstrong\u003e4\u003c\/strong\u003e footswitches, 1\/4\" TRS balanced outputs and 1\/8\" TRS MIDI; the GP-200JR has a built-in expression pedal, \u003cstrong\u003e3\u003c\/strong\u003e footswitches, XLR outputs and no MIDI jacks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e \u003cstrong\u003e9V DC\u003c\/strong\u003e, \u003cstrong\u003e1000 mA\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight?\u003c\/strong\u003e \u003cstrong\u003e253 x 165 x 56 mm\u003c\/strong\u003e (\u003cstrong\u003e10.0 x 6.5 x 2.2 in\u003c\/strong\u003e) and \u003cstrong\u003e1.25 kg\u003c\/strong\u003e (\u003cstrong\u003e2.8 lb\u003c\/strong\u003e).\u003c\/p\u003e","brand":"Valeton","offers":[{"title":"GP-200LT","offer_id":43920178872573,"sku":"888506830075","price":399.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/valeton-gp-200lt-top-view-display-footswitches.jpg?v=1785861923"},{"product_id":"valeton-gp-200r-multi-effects-processor","title":"Valeton GP-200R Multi-Effects Processor for Guitar \u0026 Bass, Red, Expression Pedal, MIDI, USB Audio","description":"\u003cp\u003e\u003cstrong\u003eWant the GP-200's full feature set in a finish that stands out?\u003c\/strong\u003e The GP-200R is the red colorway of the GP-200, identical in features and functions to the standard black unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists and bassists choose the GP-200R\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSame \u003cstrong\u003e11\u003c\/strong\u003e simultaneous movable modules, \u003cstrong\u003e240+\u003c\/strong\u003e effects and \u003cstrong\u003e140+\u003c\/strong\u003e guitar, bass and acoustic amp\/cab models as the standard GP-200 — no feature trade-off for the finish.\u003c\/li\u003e\n\u003cli\u003eBuilt-in optical expression pedal handles wah and volume swells without an extra pedal, and can control up to \u003cstrong\u003e3\u003c\/strong\u003e effect parameters at once.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e256\u003c\/strong\u003e patch slots (\u003cstrong\u003e100\u003c\/strong\u003e factory, \u003cstrong\u003e156\u003c\/strong\u003e user) for saving a different rig per song.\u003c\/li\u003e\n\u003cli\u003eUSB-C \u003cstrong\u003e6-in\/4-out\u003c\/strong\u003e audio interface doubles the unit as a recording tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20\u003c\/strong\u003e user IR slots for loading third-party cabinet impulse responses.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eGP-200, GP-200R and GP-200X\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll three share the same hardware: 24-bit\/44.1 kHz engine, 240+ effects, 140+ amp\/cab models, 20 user IR slots, 11 simultaneous freely movable modules, a 180-second looper and 100 drum patterns. The GP-200R differs from the standard GP-200 only in its red finish; the GP-200X is the 10th-anniversary edition with a navy blue and red color-block finish and 28 artist presets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControls and footswitches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.3-inch\u003c\/strong\u003e color TFT display (\u003cstrong\u003e480 x 272\u003c\/strong\u003e) with multi-language interface.\u003c\/li\u003e\n\u003cli\u003eAmp-style knobs, quick-access knobs and dedicated module on\/off buttons for fast editing without menu diving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8\u003c\/strong\u003e customizable LED footswitches with \u003cstrong\u003e3\u003c\/strong\u003e footswitch templates; the upper row is protected against accidental activation.\u003c\/li\u003e\n\u003cli\u003eBuilt-in optical-sensor expression pedal plus a 1\/4\" TRS EXP\/FS jack.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLooper, Drums and Tuner\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e180-second\u003c\/strong\u003e looper with auto-recording and undo\/redo.\u003c\/li\u003e\n\u003cli\u003eDrum machine with \u003cstrong\u003e100\u003c\/strong\u003e patterns.\u003c\/li\u003e\n\u003cli\u003eBuilt-in chromatic tuner.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGuitar input: 1\/4\" unbalanced TS with three impedance settings: \u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e (A.GT, active pickups), \u003cstrong\u003e1 MΩ\u003c\/strong\u003e (E.GT, passive pickups), \u003cstrong\u003e10 kΩ\u003c\/strong\u003e (Line).\u003c\/li\u003e\n\u003cli\u003eOutputs: stereo L\/R on 2 x 1\/4\" unbalanced TS jacks and 2 x XLR balanced jacks (\u003cstrong\u003e1 kΩ\u003c\/strong\u003e), plus a 1\/8\" stereo headphone output (\u003cstrong\u003e22 Ω\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003eFX loop: 1\/4\" SEND (\u003cstrong\u003e1 kΩ\u003c\/strong\u003e) and RETURN (\u003cstrong\u003e100 kΩ\u003c\/strong\u003e) for external pedals.\u003c\/li\u003e\n\u003cli\u003e1\/8\" stereo AUX input (\u003cstrong\u003e10 kΩ\u003c\/strong\u003e) for playing along with backing tracks.\u003c\/li\u003e\n\u003cli\u003e1\/4\" TRS EXP\/FS jack for an additional expression pedal or footswitch (TRS expression pedals rated \u003cstrong\u003e10 kΩ, 25 kΩ, 50 kΩ or 100 kΩ\u003c\/strong\u003e; calibrate on first connection).\u003c\/li\u003e\n\u003cli\u003e5-pin MIDI IN and MIDI OUT\/THRU.\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 Type-C: \u003cstrong\u003e6-in\/4-out\u003c\/strong\u003e audio interface with loopback and re-amping, recording at \u003cstrong\u003e16 or 24-bit \/ 44.1 kHz\u003c\/strong\u003e; works with Windows, Mac, iOS and Android (free ASIO driver for Windows).\u003c\/li\u003e\n\u003cli\u003eFree Windows\/Mac editor for tone editing, firmware updates and third-party IR management.\u003c\/li\u003e\n\u003cli\u003ePower: \u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, 5.5 x 2.1 mm barrel, \u003cstrong\u003e1000 mA\u003c\/strong\u003e. No battery operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRugged cast metal chassis in red finish.\u003c\/li\u003e\n\u003cli\u003e24-bit A\/D and D\/A conversion, \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e sampling, \u003cstrong\u003e110 dB\u003c\/strong\u003e signal-to-noise ratio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eValeton GP-200R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eFloor multi-effects processor \/ amp and cab modeler with built-in expression pedal, red finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstruments\u003c\/th\u003e\n\u003ctd\u003eElectric guitar, bass, acoustic guitar, line-level sources\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects \/ amps\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e240+\u003c\/strong\u003e effects incl. \u003cstrong\u003e140+\u003c\/strong\u003e amp\/cab models; \u003cstrong\u003e20\u003c\/strong\u003e user IR slots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModules\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e11\u003c\/strong\u003e simultaneous, freely movable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePatches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e256\u003c\/strong\u003e (\u003cstrong\u003e100\u003c\/strong\u003e factory \/ \u003cstrong\u003e156\u003c\/strong\u003e user)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8\u003c\/strong\u003e LED footswitches, \u003cstrong\u003e3\u003c\/strong\u003e templates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpression\u003c\/th\u003e\n\u003ctd\u003eBuilt-in optical pedal + 1\/4\" TRS EXP\/FS jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLooper \/ drums\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e180 s\u003c\/strong\u003e looper; \u003cstrong\u003e100\u003c\/strong\u003e drum patterns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4.3\"\u003c\/strong\u003e TFT, \u003cstrong\u003e480 x 272\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e2 x 1\/4\" TS, 2 x XLR (\u003cstrong\u003e1 kΩ\u003c\/strong\u003e), FX SEND, 1\/8\" headphone (\u003cstrong\u003e22 Ω\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInputs\u003c\/th\u003e\n\u003ctd\u003e1\/4\" guitar (\u003cstrong\u003e4.7 MΩ \/ 1 MΩ \/ 10 kΩ\u003c\/strong\u003e), FX RETURN (\u003cstrong\u003e100 kΩ\u003c\/strong\u003e), 1\/8\" AUX (\u003cstrong\u003e10 kΩ\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMIDI\u003c\/th\u003e\n\u003ctd\u003e5-pin MIDI IN, MIDI OUT\/THRU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Type-C, \u003cstrong\u003e6-in\/4-out\u003c\/strong\u003e audio, \u003cstrong\u003e16\/24-bit, 44.1 kHz\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAudio\u003c\/th\u003e\n\u003ctd\u003e24-bit A\/D\/A, \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e, SNR \u003cstrong\u003e110 dB\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, \u003cstrong\u003e1000 mA\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e13.6 x 8.7 x 2.5 in\u003c\/strong\u003e (\u003cstrong\u003e345 x 220 x 62.5 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e5.2 lb\u003c\/strong\u003e (\u003cstrong\u003e2.37 kg\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003ctd\u003eCast metal, red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the GP-200R different from the GP-200 in features?\u003c\/strong\u003e No. The GP-200R is identical to the GP-200 in features and functions; it is simply the red colorway, and the GP-200 manual applies to it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it have a built-in expression pedal?\u003c\/strong\u003e Yes, a built-in optical-sensor expression pedal that can control up to 3 parameters, plus a 1\/4\" TRS EXP\/FS jack for a second pedal or footswitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many patches can I save?\u003c\/strong\u003e 256 total: 100 factory presets and 156 user slots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it as an audio interface?\u003c\/strong\u003e Yes, USB-C 6-in\/4-out with loopback and re-amping, at 16 or 24-bit \/ 44.1 kHz, on Windows, Mac, iOS and Android.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e 9V DC, center negative, 5.5 x 2.1 mm barrel, rated for at least 1000 mA. It has no battery option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it with bass or acoustic guitar?\u003c\/strong\u003e Yes. The library includes bass and acoustic amp\/cab models, and the input has A.GT, E.GT and Line impedance settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I connect my own pedals?\u003c\/strong\u003e Yes, through the FX loop (SEND\/RETURN), which you can place in the chain like any other module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the GP-200X anniversary presets work on the GP-200R?\u003c\/strong\u003e Yes. GP-200 and GP-200R owners can install the 10th-anniversary firmware upgrade and the artist presets.\u003c\/p\u003e","brand":"Valeton","offers":[{"title":"GP-200R","offer_id":43920192340221,"sku":"888506830068","price":479.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/valeton-gp-200r-top-view-lit-display-01a.jpg?v=1785863379"},{"product_id":"valeton-gp-200-multi-effects-processor","title":"Valeton GP-200 Multi-Effects Processor for Guitar \u0026 Bass, Expression Pedal, MIDI, USB Interface","description":"\u003cp\u003e\u003cstrong\u003eStop juggling a pedalboard full of separate boxes.\u003c\/strong\u003e The Valeton GP-200 puts 240+ effects, 140+ amp and cabinet models, and a built-in expression pedal into one floor unit, so you can build a full rig, save it as a patch, and call it up with one footswitch tap at rehearsal or on stage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists and bassists choose the GP-200\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUp to \u003cstrong\u003e11\u003c\/strong\u003e movable modules run at once, so you build the exact signal chain your song needs instead of a fixed layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e256\u003c\/strong\u003e patch slots (\u003cstrong\u003e100\u003c\/strong\u003e factory, \u003cstrong\u003e156\u003c\/strong\u003e user) let you save a different rig for every song on a setlist and recall it instantly.\u003c\/li\u003e\n\u003cli\u003eThe built-in expression pedal controls up to \u003cstrong\u003e3\u003c\/strong\u003e parameters at once, so wah, volume swells and pitch effects don't need a separate expression pedal.\u003c\/li\u003e\n\u003cli\u003eDoubles as a USB-C audio interface (\u003cstrong\u003e6-in\/4-out\u003c\/strong\u003e) with loopback and re-amping, so the same unit that gigs with you also records at home.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20\u003c\/strong\u003e user cabinet IR slots let you load third-party impulse responses beyond the 140+ built-in amp\/cab models.\u003c\/li\u003e\n\u003cli\u003eA \u003cstrong\u003e180\u003c\/strong\u003e-second looper with auto-record and undo\/redo, plus \u003cstrong\u003e100\u003c\/strong\u003e drum patterns, covers practice and songwriting.\u003c\/li\u003e\n\u003cli\u003eBalanced XLR outputs and separate 1\/4\" outputs let you feed a PA and a stage amp at the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and footswitches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4.3-inch color TFT display (\u003cstrong\u003e480 x 272\u003c\/strong\u003e) with multi-language menus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8\u003c\/strong\u003e customizable LED footswitches with \u003cstrong\u003e3\u003c\/strong\u003e footswitch templates; the upper row is protected against accidental activation.\u003c\/li\u003e\n\u003cli\u003eFootswitches −, +, CTRL, TAP and A–D: A–D load patches, − and + change banks, and holding TAP opens the built-in chromatic tuner.\u003c\/li\u003e\n\u003cli\u003eAmp knobs (Gain, Bass, Middle, Treble, Presence, Volume), PARA and MASTER knobs, and dedicated module buttons (PRE, WAH, DST, AMP, NR, CAB, EQ, MOD, DLY, RVB).\u003c\/li\u003e\n\u003cli\u003eBuilt-in optical-sensor expression pedal with two modes (A and B), switched by pressing the pedal fully forward; each mode controls up to \u003cstrong\u003e3\u003c\/strong\u003e parameters.\u003c\/li\u003e\n\u003cli\u003e1\/4\" TRS EXP\/FS jack for an external expression pedal or footswitch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput: 1\/4\" TS instrument input with three impedance settings — A.GT \u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e, E.GT \u003cstrong\u003e1 MΩ\u003c\/strong\u003e, Line \u003cstrong\u003e10 kΩ\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eOutputs: L\/R 1\/4\" unbalanced and L\/R XLR balanced (\u003cstrong\u003e1 kΩ\u003c\/strong\u003e), with a ground-lift switch.\u003c\/li\u003e\n\u003cli\u003eFX loop: 1\/4\" send and return for external pedals.\u003c\/li\u003e\n\u003cli\u003e1\/8\" stereo aux input (also routed to USB for streaming) and 1\/8\" headphone output (\u003cstrong\u003e22 Ω\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003e5-pin MIDI IN, OUT and THRU.\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 Type-C audio interface: \u003cstrong\u003e6-in\/4-out\u003c\/strong\u003e, 16- or 24-bit at \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e, Windows, macOS, iOS and Android (free ASIO driver for Windows).\u003c\/li\u003e\n\u003cli\u003ePower: \u003cstrong\u003e9V DC\u003c\/strong\u003e, \u003cstrong\u003e1000 mA\u003c\/strong\u003e, center-negative, 5.5 x 2.1 mm barrel; no battery operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSoftware\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFree Windows\/Mac editor for editing tones, updating firmware and loading or managing third-party IRs.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eValeton GP-200 processor\u003c\/li\u003e\n\u003cli\u003e9V DC power adapter\u003c\/li\u003e\n\u003cli\u003eUSB Type-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eValeton GP-200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eFloor multi-effects processor \/ amp and cab modeler with built-in expression pedal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e240+\u003c\/strong\u003e effects, incl. \u003cstrong\u003e140+\u003c\/strong\u003e amp and cab models and \u003cstrong\u003e100+\u003c\/strong\u003e stompbox effects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect chain\u003c\/th\u003e\n\u003ctd\u003eUp to \u003cstrong\u003e11\u003c\/strong\u003e simultaneous, freely movable modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUser IRs\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e20\u003c\/strong\u003e slots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePatches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e256\u003c\/strong\u003e (\u003cstrong\u003e100\u003c\/strong\u003e factory \/ \u003cstrong\u003e156\u003c\/strong\u003e user)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLooper \/ drums\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e180\u003c\/strong\u003e-second looper, \u003cstrong\u003e100\u003c\/strong\u003e drum patterns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8\u003c\/strong\u003e LED footswitches, \u003cstrong\u003e3\u003c\/strong\u003e templates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpression\u003c\/th\u003e\n\u003ctd\u003eBuilt-in optical pedal + 1\/4\" TRS EXP\/FS jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003e4.3\" color TFT, 480 x 272\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003eL\/R 1\/4\" unbalanced, L\/R XLR balanced, headphones 1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFX loop\u003c\/th\u003e\n\u003ctd\u003e1\/4\" send \/ return\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMIDI\u003c\/th\u003e\n\u003ctd\u003e5-pin IN, OUT, THRU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Type-C audio interface, 6-in\/4-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eA\/D-D\/A\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\u003c\/strong\u003e, \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e, \u003cstrong\u003e110 dB\u003c\/strong\u003e SNR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, \u003cstrong\u003e1000 mA\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e13.6 x 8.7 x 2.5 in\u003c\/strong\u003e (\u003cstrong\u003e345 x 220 x 62.5 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e5.2 lb\u003c\/strong\u003e (\u003cstrong\u003e2.37 kg\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003ctd\u003eCast metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many effects can I run at once on the GP-200?\u003c\/strong\u003e Up to \u003cstrong\u003e11\u003c\/strong\u003e freely movable effect modules simultaneously, drawn from 240+ effects and 140+ amp\/cab models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the GP-200 have a built-in expression pedal?\u003c\/strong\u003e Yes, a built-in optical-sensor expression pedal with two modes, each controlling up to \u003cstrong\u003e3\u003c\/strong\u003e parameters, plus a 1\/4\" TRS EXP\/FS jack for an external pedal or footswitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does it need, and is one included?\u003c\/strong\u003e \u003cstrong\u003e9V DC\u003c\/strong\u003e, \u003cstrong\u003e1000 mA\u003c\/strong\u003e, center-negative (5.5 x 2.1 mm barrel). A 9V DC adapter comes in the box; the unit does not run on batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the GP-200 as an audio interface?\u003c\/strong\u003e Yes, a USB-C \u003cstrong\u003e6-in\/4-out\u003c\/strong\u003e audio interface with loopback and re-amping on Windows, macOS, iOS and Android.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it have MIDI?\u003c\/strong\u003e Yes, full-size 5-pin MIDI IN, OUT and THRU jacks for external controllers and other MIDI gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the GP-200 work for bass and acoustic guitar too?\u003c\/strong\u003e Yes. The amp models cover guitar, bass and acoustic, and the input has A.GT, E.GT and Line impedance settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between GP-200 and GP-200R?\u003c\/strong\u003e None in features or hardware — the GP-200R is the same unit in a red finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it different from the GP-200JR and GP-200LT?\u003c\/strong\u003e Same effects engine. The GP-200 has \u003cstrong\u003e8\u003c\/strong\u003e footswitches, a built-in expression pedal and 5-pin MIDI. The GP-200JR is smaller, with \u003cstrong\u003e3\u003c\/strong\u003e footswitches, a built-in expression pedal and no MIDI jacks. The GP-200LT is the lightest, with \u003cstrong\u003e4\u003c\/strong\u003e footswitches, no built-in expression pedal and 1\/8\" TRS MIDI.\u003c\/p\u003e","brand":"Valeton","offers":[{"title":"GP-200","offer_id":43920194044157,"sku":"888506830044","price":479.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/valeton-gp-200-top-view-lit-display-01a.jpg?v=1785861922"},{"product_id":"valeton-gp-100-multi-effects-processor","title":"Valeton GP-100 Multi-Effects Processor for Guitar \u0026 Bass, Expression Pedal, Looper, USB Audio","description":"\u003cp\u003e\u003cstrong\u003eWant a full floor processor without stepping up to a flagship price tag?\u003c\/strong\u003e The GP-100 packs 140+ effects, 45 amp types and a built-in expression pedal onto one compact board, with a 90-second looper and drum machine for building ideas on the spot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists and bassists choose the GP-100\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e45\u003c\/strong\u003e guitar, bass and acoustic amp types and \u003cstrong\u003e40\u003c\/strong\u003e factory cabinet IRs cover most rock, blues and metal tones without buying separate amp-modeling gear.\u003c\/li\u003e\n\u003cli\u003eA built-in expression pedal handles wah and volume swells without an extra pedal on the floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e198\u003c\/strong\u003e presets (\u003cstrong\u003e99\u003c\/strong\u003e factory, \u003cstrong\u003e99\u003c\/strong\u003e user) give room to build and store your own rigs alongside the factory starting points.\u003c\/li\u003e\n\u003cli\u003eThe \u003cstrong\u003e90-second\u003c\/strong\u003e looper, \u003cstrong\u003e100\u003c\/strong\u003e drum patterns and USB audio interface cover live looping, practice and basic recording into a DAW.\u003c\/li\u003e\n\u003cli\u003eStompbox and preset modes, with a durable metal chassis and footswitches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEffects and modeling\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOver \u003cstrong\u003e140\u003c\/strong\u003e effects, including 50+ dynamics, drive, EQ, modulation, delay and reverb effects.\u003c\/li\u003e\n\u003cli\u003eUp to \u003cstrong\u003e9\u003c\/strong\u003e simultaneous effects in an editable chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40\u003c\/strong\u003e factory cabinet IRs plus \u003cstrong\u003e20\u003c\/strong\u003e user IR slots for loading third-party impulse responses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-bit\u003c\/strong\u003e \/ \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e processing, \u003cstrong\u003e110 dB\u003c\/strong\u003e SNR.\u003c\/li\u003e\n\u003cli\u003eBuilt-in chromatic tuner.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGuitar input: 1\/4\" unbalanced (TS), \u003cstrong\u003e1 MΩ\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eOutputs L\/R: 1\/4\" unbalanced (TS), stereo pair.\u003c\/li\u003e\n\u003cli\u003eHeadphones: 1\/8\" stereo (TRS).\u003c\/li\u003e\n\u003cli\u003eAux in: 1\/8\" stereo (TRS) for playing along with backing tracks.\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 Type-B: stereo USB audio interface (16- or 24-bit recording), free ASIO driver for Windows; works with iOS\/Android via an OTG cable.\u003c\/li\u003e\n\u003cli\u003eFree PC\/Mac editor for tones and preset management.\u003c\/li\u003e\n\u003cli\u003ePower: \u003cstrong\u003e9V DC\u003c\/strong\u003e, \u003cstrong\u003e500 mA\u003c\/strong\u003e. No internal battery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eValeton GP-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct class\u003c\/th\u003e\n\u003ctd\u003eCompact floor multi-effects processor with built-in expression pedal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTarget instruments\u003c\/th\u003e\n\u003ctd\u003eElectric guitar, bass and acoustic guitar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects \/ amps\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e140+\u003c\/strong\u003e effects, \u003cstrong\u003e45\u003c\/strong\u003e amp types, \u003cstrong\u003e40\u003c\/strong\u003e factory cab IRs, \u003cstrong\u003e20\u003c\/strong\u003e user IRs, up to \u003cstrong\u003e9\u003c\/strong\u003e simultaneous effects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePresets\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e198\u003c\/strong\u003e (\u003cstrong\u003e99\u003c\/strong\u003e factory \/ \u003cstrong\u003e99\u003c\/strong\u003e user)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLooper\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e90\u003c\/strong\u003e seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrum machine\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e100\u003c\/strong\u003e patterns (including metronome)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAudio\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\u003c\/strong\u003e A\/D\/A, \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e, SNR \u003cstrong\u003e110 dB\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e1\/4\" TS, \u003cstrong\u003e1 MΩ\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAux in\u003c\/th\u003e\n\u003ctd\u003e1\/8\" TRS stereo, \u003cstrong\u003e10 kΩ\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e1\/4\" TS L\/R, \u003cstrong\u003e1 kΩ\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeadphones\u003c\/th\u003e\n\u003ctd\u003e1\/8\" TRS stereo, \u003cstrong\u003e47 Ω\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Type-B, stereo audio interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e, \u003cstrong\u003e500 mA\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W × D × H)\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e7.8 × 5.3 × 1.1 in\u003c\/strong\u003e (\u003cstrong\u003e198 × 134 × 28 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1.76 lb\u003c\/strong\u003e (\u003cstrong\u003e800 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the GP-100 have a battery?\u003c\/strong\u003e No, the GP-100 runs on an external 9 V DC, 500 mA power supply; there is no internal battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it support NAM or SnapTone amp captures?\u003c\/strong\u003e No. The GP-100 uses Valeton's first-generation modeling with 45 amp types and 40 cabinet IRs, plus 20 slots for third-party IRs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it with bass or acoustic guitar?\u003c\/strong\u003e Yes — the 45 amp types include guitar, bass and acoustic amp models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the looper?\u003c\/strong\u003e 90 seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many effects can run at once?\u003c\/strong\u003e Up to 9 simultaneous effects, drawn from a 140+ effects library.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it as an audio interface?\u003c\/strong\u003e Yes, via USB 2.0 Type-B for stereo recording into a computer (16- or 24-bit), with a free ASIO driver for Windows; phones and tablets connect with an OTG cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the GP-100 different from the GP-150?\u003c\/strong\u003e The GP-150 is the newer 48 kHz platform with SnapTone NAM support, an internal battery and Bluetooth; the GP-100 is the earlier 44.1 kHz platform without those.\u003c\/p\u003e","brand":"Valeton","offers":[{"title":"Nero","offer_id":43920225140989,"sku":"888506830037","price":199.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/valeton-gp-100-black-top-view-oled-display.jpg?v=1785861876"},{"product_id":"valeton-rushead-max-rh-100-pocket-guitar-amp","title":"Valeton Rushead Max RH-100 Pocket Headphone Guitar Amp, Mod \u0026 Reverb\/Delay, AUX In","description":"\u003cp\u003e\u003cstrong\u003eWant to practice guitar through headphones without lugging an amp?\u003c\/strong\u003e The Rushead Max plugs straight into your guitar, running world-class amp models plus switchable modulation and ambient effects through a \u003cstrong\u003e5-hour\u003c\/strong\u003e rechargeable battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Rushead Max\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePlugs directly into your guitar — no amp, no cables to a separate unit, just headphones for silent practice anywhere.\u003c\/li\u003e\n\u003cli\u003eClean, overdrive and distortion voicings modeled on world-class guitar amplifiers cover a wide practice tone range.\u003c\/li\u003e\n\u003cli\u003eA switchable mod module (chorus\/tremolo\/flanger) and ambient module (reverb\/delay) add texture without extra pedals.\u003c\/li\u003e\n\u003cli\u003eAn AUX input lets you play along with songs or backing tracks from your phone or audio player.\u003c\/li\u003e\n\u003cli\u003eUp to \u003cstrong\u003e5 hours\u003c\/strong\u003e of playing from a USB-rechargeable \u003cstrong\u003e5V\u003c\/strong\u003e lithium battery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRushead Max RH-100 vs Rushead Max Bass (RH-101)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSame size, weight and battery runtime as the Rushead Max Bass (RH-101) — the difference is the voicing set (guitar amps vs bass amps) and the effects: the bass version swaps delay for ECHO, REVERB and a combined ECHOVERB, with FLOW\/TREM\/DEEP modulation. Choose based on your instrument.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\u003c\/strong\u003e knobs: LEVEL (output volume), TONE (brightness), GAIN, MOD (modulation amount) and AMBIENT (reverb\/delay amount).\u003c\/li\u003e\n\u003cli\u003eTYPE switch: CL (natural, transparent clean based on vintage US-style combo amps), OD (overdrive) and DIST (distortion).\u003c\/li\u003e\n\u003cli\u003eSwitchable mod module: chorus \/ tremolo \/ flanger.\u003c\/li\u003e\n\u003cli\u003eSwitchable ambient module: reverb and delay.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in \u003cstrong\u003e1\/4\"\u003c\/strong\u003e plug goes straight into the guitar's output jack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8\"\u003c\/strong\u003e (3.5 mm) headphone output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8\"\u003c\/strong\u003e AUX IN for an audio player or phone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5V\u003c\/strong\u003e lithium battery, up to \u003cstrong\u003e5 hours\u003c\/strong\u003e per charge, charged over USB.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eValeton Rushead Max (RH-100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePlug-in pocket headphone amplifier for electric guitar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmp types\u003c\/th\u003e\n\u003ctd\u003eCL (clean), OD (overdrive), DIST (distortion)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMod module\u003c\/th\u003e\n\u003ctd\u003eChorus \/ tremolo \/ flanger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmbient module\u003c\/th\u003e\n\u003ctd\u003eReverb \/ delay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControls\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e5\u003c\/strong\u003e knobs (LEVEL, TONE, GAIN, MOD, AMBIENT), TYPE switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstrument input impedance\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e1 MΩ\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAUX IN\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1\/8\"\u003c\/strong\u003e, \u003cstrong\u003e10 kΩ\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeadphone output\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1\/8\"\u003c\/strong\u003e, \u003cstrong\u003e10 Ω\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e5V\u003c\/strong\u003e lithium battery, up to \u003cstrong\u003e5 hours\u003c\/strong\u003e, USB charging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.94 × 3.48 × 1.24 in\u003c\/strong\u003e (\u003cstrong\u003e100 × 88.5 × 31.5 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e2.4 oz\u003c\/strong\u003e (\u003cstrong\u003e68 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the battery last?\u003c\/strong\u003e Up to \u003cstrong\u003e5 hours\u003c\/strong\u003e per charge on the built-in \u003cstrong\u003e5V\u003c\/strong\u003e lithium battery, charged over USB.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it plug directly into my guitar?\u003c\/strong\u003e Yes, it's a plug-in pocket headphone amp — no separate amp or cabinet needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I play along with songs?\u003c\/strong\u003e Yes. Connect a phone or audio player to the \u003cstrong\u003e1\/8\"\u003c\/strong\u003e AUX IN and you hear it mixed with your guitar in the headphones.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat headphones do I need?\u003c\/strong\u003e Any headphones or earbuds with a standard \u003cstrong\u003e1\/8\"\u003c\/strong\u003e (3.5 mm) plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference from the bass version?\u003c\/strong\u003e The Rushead Max uses guitar amp voicings and a reverb\/delay ambient module; the Rushead Max Bass (RH-101) uses bass amp voicings and ECHO \/ REVERB \/ ECHOVERB. Same size and battery otherwise.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ambient effects does it have?\u003c\/strong\u003e Switchable reverb or delay, with the AMBIENT knob setting the amount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the unit weight?\u003c\/strong\u003e \u003cstrong\u003e68 g\u003c\/strong\u003e (\u003cstrong\u003e2.4 oz\u003c\/strong\u003e).\u003c\/p\u003e","brand":"Valeton","offers":[{"title":"Guitar","offer_id":43920241885437,"sku":"888506830211","price":54.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/valeton-rushead-max-rh-100-gold-front-view-control-knobs.jpg?v=1785863509"},{"product_id":"valeton-dapper-indie-combined-effects-strip","title":"Valeton Dapper Indie VES-5 Guitar Effects Strip, Drive, Fuzz, Mod, Delay, Reverb, Tap Tempo","description":"\u003cp\u003e\u003cstrong\u003eChasing that shimmery, ambient indie-rock wall of sound?\u003c\/strong\u003e The Dapper Indie strings together a drive, a fuzz, a switchable modulation module and three delays feeding three reverbs, with tap tempo on the modulation and delay modules so your washes land in the pocket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy indie and ambient guitarists choose the Dapper Indie\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo independent gain stages — INDIE DRIVE and FUZZ WALL — let you stack overdrive into fuzz instead of choosing only one.\u003c\/li\u003e\n\u003cli\u003eLIQUID FX gives you chorus, phaser or tremolo from a single module instead of three separate pedals.\u003c\/li\u003e\n\u003cli\u003eECHOES offers \u003cstrong\u003e3\u003c\/strong\u003e delay types (analog, tape, reverse) and AMBIENT \u003cstrong\u003e3\u003c\/strong\u003e reverb types (room, hall, plate); LIQUID FX and ECHOES both support tap tempo.\u003c\/li\u003e\n\u003cli\u003eA switchable effect trail keeps delay and reverb tails ringing after you bypass them.\u003c\/li\u003e\n\u003cli\u003eA headphone output with cabinet simulation turns the strip into a silent practice rig.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 cm\u003c\/strong\u003e-wide chassis with per-module footswitches keeps the whole ambient chain on one strip instead of six pedals and patch cables.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and modules\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTUNER — built-in tuner with a large, bright note display; hold the FUZZ WALL footswitch to enter it (output mutes).\u003c\/li\u003e\n\u003cli\u003eINDIE DRIVE — overdrive from warm breakup to saturated grit, with a 2-band (bass\/treble) EQ.\u003c\/li\u003e\n\u003cli\u003eFUZZ WALL — fuzz from mild to wild, with its own bass and treble controls.\u003c\/li\u003e\n\u003cli\u003eLIQUID FX — chorus \/ phaser \/ tremolo on a 3-way toggle, with tap tempo.\u003c\/li\u003e\n\u003cli\u003eECHOES — analog, tape and reverse delays, with tap tempo.\u003c\/li\u003e\n\u003cli\u003eAMBIENT — room, hall and plate reverbs; hold its footswitch to turn the effect trail on or off.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTap tempo and trails\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHold the LIQUID FX or ECHOES footswitch to enter tap mode, tap the rhythm, and hold again to return to the knob-set tempo; the RATE or TIME LED pulses with the tempo.\u003c\/li\u003e\n\u003cli\u003eHold the AMBIENT footswitch to toggle the effect trail; the LEDs under the knobs pulse to confirm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4\"\u003c\/strong\u003e input and \u003cstrong\u003e1\/4\"\u003c\/strong\u003e output to your amp (no cab sim on this output).\u003c\/li\u003e\n\u003cli\u003eHeadphone output with cabinet simulation.\u003c\/li\u003e\n\u003cli\u003eRuns on \u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative at \u003cstrong\u003e150 mA\u003c\/strong\u003e; no battery. Input impedance \u003cstrong\u003e1 MΩ\u003c\/strong\u003e, output impedance \u003cstrong\u003e100 Ω\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eValeton Dapper Indie effects strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9V\u003c\/strong\u003e power supply\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eValeton Dapper Indie (VES-5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCombined effects strip for electric guitar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModules\u003c\/th\u003e\n\u003ctd\u003eTUNER, INDIE DRIVE, FUZZ WALL, LIQUID FX (chorus\/phaser\/tremolo), ECHOES (analog\/tape\/reverse delay), AMBIENT (room\/hall\/plate reverb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTap tempo\u003c\/th\u003e\n\u003ctd\u003eLIQUID FX and ECHOES\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect trail\u003c\/th\u003e\n\u003ctd\u003eSwitchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1\/4\"\u003c\/strong\u003e output, headphone output with cab sim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput \/ output impedance\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1 MΩ\u003c\/strong\u003e \/ \u003cstrong\u003e100 Ω\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, \u003cstrong\u003e150 mA\u003c\/strong\u003e (supply included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e12.6 × 2.56 × 1.65 in\u003c\/strong\u003e (\u003cstrong\u003e320 × 65 × 42 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1.43 lb\u003c\/strong\u003e (\u003cstrong\u003e650 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I stack the drive and fuzz together?\u003c\/strong\u003e Yes, INDIE DRIVE and FUZZ WALL are independent gain stages that can be run together for a stacked overdrive-into-fuzz tone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the delay have tap tempo?\u003c\/strong\u003e Yes. ECHOES and LIQUID FX support tap tempo: hold the module's footswitch to enter tap mode. The AMBIENT reverb has no tap tempo; holding its footswitch toggles the effect trail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat delay and reverb types are there?\u003c\/strong\u003e ECHOES has analog, tape and reverse delays; AMBIENT has room, hall and plate reverbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e A \u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative adapter rated for at least \u003cstrong\u003e150 mA\u003c\/strong\u003e. A \u003cstrong\u003e9V\u003c\/strong\u003e power supply is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it have a headphone output?\u003c\/strong\u003e Yes. The headphone output has cabinet simulation for silent practice, while the regular \u003cstrong\u003e1\/4\"\u003c\/strong\u003e output feeds your amp without the cab sim. There is no XLR output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I use the tuner?\u003c\/strong\u003e Hold the FUZZ WALL footswitch; the strip mutes and the display shows the note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the input impedance?\u003c\/strong\u003e \u003cstrong\u003e1 MΩ\u003c\/strong\u003e input, \u003cstrong\u003e100 Ω\u003c\/strong\u003e output.\u003c\/p\u003e","brand":"Valeton","offers":[{"title":"chitarra","offer_id":43920289693949,"sku":"888506820151","price":174.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/valeton-dapper-indie-mint-top-view-ambient-echoes-liquidfx.jpg?v=1785861856"},{"product_id":"valeton-dapper-bass-combined-effects-strip","title":"Valeton Dapper Bass VES-2 Effects Strip, Analog Octave, Envelope Filter, FX Loop, XLR DI","description":"\u003cp\u003e\u003cstrong\u003eWant a full bass effects chain without a pedalboard full of boxes?\u003c\/strong\u003e The Dapper Bass strings together a boost\/compressor, an envelope filter, a bass amp simulator, an all-analog octave and an analog chorus in one strip, with an FX loop for adding outboard pedals and a balanced XLR out for the mixer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy bassists choose the Dapper Bass\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAn FX loop sits between the BASS AMP and OCTAVE modules, so you can drop in a favorite external pedal exactly where it matters most in the signal path.\u003c\/li\u003e\n\u003cli\u003eThe all-analog monophonic OCTAVE module adds sub-octave weight without the digital tracking glitches some bassists dislike.\u003c\/li\u003e\n\u003cli\u003eA parallel THRU output lets you send an unaffected signal to a second amp, rack processor or interface at the same time as your processed tone — or record a dry track for re-amping.\u003c\/li\u003e\n\u003cli\u003eHold the BOOST COMP footswitch to mute the unit and access the built-in tuner without unplugging.\u003c\/li\u003e\n\u003cli\u003eBalanced XLR output with a ground\/lift switch goes straight to the mixer, so DI'ing your bass doesn't need a separate box.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and footswitches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTUNER — large, bright display; silent tuning while active.\u003c\/li\u003e\n\u003cli\u003eBOOST COMP — set-and-forget boost\/compressor knobs; hold the footswitch for the built-in tuner (mutes output).\u003c\/li\u003e\n\u003cli\u003eDIRTY Q — vocal-style envelope filter with sensitivity and volume controls plus a fuzz switch.\u003c\/li\u003e\n\u003cli\u003eBASS AMP — gain and 3-band EQ for amp-style tone shaping.\u003c\/li\u003e\n\u003cli\u003eOCTAVE — dry, one-octave-down and two-octaves-down level knobs, all-analog monophonic tracking.\u003c\/li\u003e\n\u003cli\u003eCHORUS — analog chorus with a single depth knob.\u003c\/li\u003e\n\u003cli\u003ePer-module ON\/OFF footswitches with status LEDs; the FX loop has no footswitch of its own.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInstrument input and unbalanced \u003cstrong\u003e1\/4\"\u003c\/strong\u003e output.\u003c\/li\u003e\n\u003cli\u003eTHRU output — dry, parallel signal.\u003c\/li\u003e\n\u003cli\u003eFX loop between BASS AMP and OCTAVE.\u003c\/li\u003e\n\u003cli\u003eBalanced XLR DI output with ground lift.\u003c\/li\u003e\n\u003cli\u003eRuns on \u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative at \u003cstrong\u003e85 mA\u003c\/strong\u003e; no battery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eValeton Dapper Bass effects strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9V\u003c\/strong\u003e power supply\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eValeton Dapper Bass (VES-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCombined effects strip for bass with FX loop and DI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModules\u003c\/th\u003e\n\u003ctd\u003eTUNER, BOOST COMP, DIRTY Q envelope filter, BASS AMP, analog OCTAVE, analog CHORUS, FX LOOP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003eUnbalanced \u003cstrong\u003e1\/4\"\u003c\/strong\u003e output, THRU parallel output, XLR balanced output with ground lift\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, \u003cstrong\u003e85 mA\u003c\/strong\u003e (supply included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e12.6 × 2.56 × 1.65 in\u003c\/strong\u003e (\u003cstrong\u003e320 × 65 × 42 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1.5 lb\u003c\/strong\u003e (\u003cstrong\u003e690 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dapper Bass have an FX loop?\u003c\/strong\u003e Yes, positioned between the BASS AMP and OCTAVE modules so an outboard pedal can sit exactly there in the chain. It is always in the path and has no separate footswitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the octave effect digital or analog?\u003c\/strong\u003e All-analog monophonic octave tracking, on the OCTAVE module, with separate dry, one-octave-down and two-octaves-down levels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I send a dry signal to a second amp?\u003c\/strong\u003e Yes, the THRU output is a parallel, unaffected output separate from the main processed output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I access the tuner?\u003c\/strong\u003e Hold the BOOST COMP module's footswitch; the unit mutes and the tuner activates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e A \u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative adapter rated for at least \u003cstrong\u003e85 mA\u003c\/strong\u003e. A \u003cstrong\u003e9V\u003c\/strong\u003e power supply is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I run it straight into a mixer or audio interface?\u003c\/strong\u003e Yes. The balanced XLR output works as a built-in DI, with a ground lift switch for hum from ground loops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes DIRTY Q only do filter sweeps?\u003c\/strong\u003e It is an envelope filter with sensitivity and volume controls, and a fuzz switch adds grit to the filtered sound.\u003c\/p\u003e","brand":"Valeton","offers":[{"title":"Bass","offer_id":43920298508541,"sku":"888506820021","price":179.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/valeton-dapper-bass-green-top-view-chorus-octave-bassamp.jpg?v=1785861856"},{"product_id":"valeton-gp-200jr-multi-effects-processor","title":"Valeton GP-200JR Compact Multi-Effects Processor for Guitar \u0026 Bass, Expression Pedal, XLR Outs","description":"\u003cp\u003e\u003cstrong\u003eWant GP-200 tone in a smaller footprint?\u003c\/strong\u003e The GP-200JR keeps the GP-200 platform's 240+ effects and amp modeling but shrinks the chassis, so it fits smaller pedalboards and gig bags without giving up the built-in expression pedal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists and bassists choose the GP-200JR\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSame 240+ effects and 140+ amp\/cab engine as the full-size GP-200, in a chassis about \u003cstrong\u003e40%\u003c\/strong\u003e smaller by footprint (\u003cstrong\u003e281 x 166 mm\u003c\/strong\u003e vs \u003cstrong\u003e345 x 220 mm\u003c\/strong\u003e) and about a third lighter.\u003c\/li\u003e\n\u003cli\u003eBuilt-in expression pedal controlling up to \u003cstrong\u003e3\u003c\/strong\u003e parameters, plus a 1\/4\" TRS EXP\/FS jack for an external pedal or footswitch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e255\u003c\/strong\u003e patch slots (\u003cstrong\u003e99\u003c\/strong\u003e factory, \u003cstrong\u003e156\u003c\/strong\u003e user) for building and saving your own rigs.\u003c\/li\u003e\n\u003cli\u003eUp to \u003cstrong\u003e11\u003c\/strong\u003e freely movable modules in the chain, \u003cstrong\u003e20\u003c\/strong\u003e user IR slots, a \u003cstrong\u003e180\u003c\/strong\u003e-second looper and \u003cstrong\u003e100\u003c\/strong\u003e drum patterns.\u003c\/li\u003e\n\u003cli\u003eUSB-C audio interface (\u003cstrong\u003e6-in\/4-out\u003c\/strong\u003e) with re-amp and loopback for direct recording.\u003c\/li\u003e\n\u003cli\u003eTwo balanced XLR outputs plus two 1\/4\" outputs for feeding a PA and a stage amp at once.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and footswitches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\u003c\/strong\u003e customizable LED footswitches with \u003cstrong\u003e3\u003c\/strong\u003e footswitch templates.\u003c\/li\u003e\n\u003cli\u003eBuilt-in expression pedal controlling up to \u003cstrong\u003e3\u003c\/strong\u003e effect parameters.\u003c\/li\u003e\n\u003cli\u003e4.3-inch color TFT display (\u003cstrong\u003e480 x 272\u003c\/strong\u003e) with multi-language menus.\u003c\/li\u003e\n\u003cli\u003eBuilt-in chromatic tuner.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput: 1\/4\" TS instrument input.\u003c\/li\u003e\n\u003cli\u003eOutputs: 2 x XLR balanced and 2 x 1\/4\" outputs.\u003c\/li\u003e\n\u003cli\u003eFX loop: 1\/4\" unbalanced send and return.\u003c\/li\u003e\n\u003cli\u003e1\/8\" stereo aux input and 1\/8\" headphone output.\u003c\/li\u003e\n\u003cli\u003e1\/4\" TRS EXP\/FS jack.\u003c\/li\u003e\n\u003cli\u003eUSB Type-C audio interface for Windows, macOS, iOS and Android; free Windows\/Mac editor.\u003c\/li\u003e\n\u003cli\u003eNo MIDI jacks.\u003c\/li\u003e\n\u003cli\u003ePower: \u003cstrong\u003e9V DC\u003c\/strong\u003e, \u003cstrong\u003e1000 mA\u003c\/strong\u003e, center-negative.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eValeton GP-200JR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCompact floor multi-effects processor (GP-200 platform) with built-in expression pedal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e240+\u003c\/strong\u003e effects, incl. \u003cstrong\u003e140+\u003c\/strong\u003e amp and cab models and \u003cstrong\u003e100+\u003c\/strong\u003e stompbox effects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect chain\u003c\/th\u003e\n\u003ctd\u003eUp to \u003cstrong\u003e11\u003c\/strong\u003e simultaneous, freely movable modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUser IRs\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e20\u003c\/strong\u003e slots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePatches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e255\u003c\/strong\u003e (\u003cstrong\u003e99\u003c\/strong\u003e factory \/ \u003cstrong\u003e156\u003c\/strong\u003e user)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLooper \/ drums\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e180\u003c\/strong\u003e-second looper, \u003cstrong\u003e100\u003c\/strong\u003e drum patterns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3\u003c\/strong\u003e LED footswitches, \u003cstrong\u003e3\u003c\/strong\u003e templates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpression\u003c\/th\u003e\n\u003ctd\u003eBuilt-in pedal + \u003cstrong\u003e1\u003c\/strong\u003e x 1\/4\" TRS EXP\/FS jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003e4.3\" color TFT, 480 x 272\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e2 x XLR balanced, 2 x 1\/4\", headphones 1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFX loop\u003c\/th\u003e\n\u003ctd\u003e1\/4\" send \/ return\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMIDI\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eType-C audio interface, 6-in\/4-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eA\/D-D\/A\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\u003c\/strong\u003e, \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, \u003cstrong\u003e1000 mA\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e11.1 x 6.5 x 2.2 in\u003c\/strong\u003e (\u003cstrong\u003e281 x 166 x 57 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.4 lb\u003c\/strong\u003e (\u003cstrong\u003e1.55 kg\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003ctd\u003eCast metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many footswitches does the GP-200JR have?\u003c\/strong\u003e \u003cstrong\u003e3\u003c\/strong\u003e customizable LED footswitches with \u003cstrong\u003e3\u003c\/strong\u003e footswitch templates, plus the built-in expression pedal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it have MIDI jacks?\u003c\/strong\u003e No. The GP-200JR has no MIDI jacks; it connects to a computer or mobile device over its USB-C audio interface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it have a built-in expression pedal?\u003c\/strong\u003e Yes, controlling up to \u003cstrong\u003e3\u003c\/strong\u003e parameters, plus one 1\/4\" TRS EXP\/FS jack for an external expression pedal or footswitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e \u003cstrong\u003e9V DC\u003c\/strong\u003e, \u003cstrong\u003e1000 mA\u003c\/strong\u003e, center-negative.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the GP-200JR different from the full-size GP-200?\u003c\/strong\u003e Same effects engine, but a smaller, lighter chassis, \u003cstrong\u003e3\u003c\/strong\u003e footswitches instead of \u003cstrong\u003e8\u003c\/strong\u003e, \u003cstrong\u003e255\u003c\/strong\u003e patch slots instead of \u003cstrong\u003e256\u003c\/strong\u003e, and no 5-pin MIDI. Both have a built-in expression pedal, XLR and 1\/4\" outputs, an FX loop and a USB-C interface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it different from the GP-200LT?\u003c\/strong\u003e The GP-200JR has a built-in expression pedal, \u003cstrong\u003e3\u003c\/strong\u003e footswitches and XLR outputs but no MIDI. The GP-200LT has no built-in pedal, \u003cstrong\u003e4\u003c\/strong\u003e footswitches, two EXP\/FS jacks, 1\/4\" TRS balanced outputs and 1\/8\" TRS MIDI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e \u003cstrong\u003e281 x 166 x 57 mm\u003c\/strong\u003e (\u003cstrong\u003e11.1 x 6.5 x 2.2 in\u003c\/strong\u003e) and \u003cstrong\u003e1.55 kg\u003c\/strong\u003e (\u003cstrong\u003e3.4 lb\u003c\/strong\u003e).\u003c\/p\u003e","brand":"Valeton","offers":[{"title":"GP-200JR","offer_id":43933375299837,"sku":"888506830082","price":429.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/valeton-gp-200jr-top-view-display-footswitches.jpg?v=1785861922"},{"product_id":"hotone-ampero-mini-mp-50vn-amp-modeler","title":"Hotone Ampero Mini MP-50VN Amp Modeler \u0026 Multi-Effects, 4\" Touchscreen, Vanilla","description":"\u003cp\u003e\u003cstrong\u003eThe Hotone Ampero Mini MP-50VN Vanilla is the smallest, lightest first-generation Ampero processor, built for travel and desk rigs where every gram and every centimetre counts.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside the \u003cstrong\u003e529 g\u003c\/strong\u003e aluminum case are a dual-core DSP, Hotone's CDCM and F.I.R.E. modeling, \u003cstrong\u003e199\u003c\/strong\u003e effects with up to \u003cstrong\u003e9\u003c\/strong\u003e running at once, and a 4\" 800 x 480 touchscreen. Two footswitches handle patches, tap tempo, the tuner and the looper, and an external controller jack adds two more switches or an expression pedal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Ampero Mini\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmallest and lightest first-generation Ampero unit at \u003cstrong\u003e529 g\u003c\/strong\u003e and \u003cstrong\u003e134 x 120 x 49 mm\u003c\/strong\u003e, easily the most travel-friendly of the family.\u003c\/li\u003e\n\u003cli\u003eUSB-C connectivity for firmware updates, editing in the free Mac\/PC Ampero Editor, and use as a USB audio interface.\u003c\/li\u003e\n\u003cli\u003eEXP\/CTRL jack made for Hotone Ampero Press or Ampero Switch, giving you a clear path to add expression or two more footswitches (FS 3\/4).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e199\u003c\/strong\u003e effects with up to \u003cstrong\u003e9\u003c\/strong\u003e simultaneous modules and \u003cstrong\u003e198\u003c\/strong\u003e patches (\u003cstrong\u003e99\u003c\/strong\u003e user + \u003cstrong\u003e99\u003c\/strong\u003e factory) keep the essential Ampero tone-shaping toolkit in a fraction of the size.\u003c\/li\u003e\n\u003cli\u003eBuilt-in drum machine with \u003cstrong\u003e100\u003c\/strong\u003e rhythm patterns and a looper with up to \u003cstrong\u003e100\u003c\/strong\u003e seconds mono or \u003cstrong\u003e50\u003c\/strong\u003e seconds stereo.\u003c\/li\u003e\n\u003cli\u003eUser IR loader for third-party speaker IRs (24-bit\/44.1 kHz mono WAV, 1024 points).\u003c\/li\u003e\n\u003cli\u003eSound Clone (firmware V2.2 and later): import up to \u003cstrong\u003e10\u003c\/strong\u003e clone files through Ampero Editor and use one at a time in the FX 1, FX 2 or AMP module. Ampero Editor V1.6.0 also converts NAM A2 files for use on Ampero Mini.\u003c\/li\u003e\n\u003cli\u003e9V DC power (\u003cstrong\u003e500 mA\u003c\/strong\u003e max), easy to share with a standard pedalboard power supply.\u003c\/li\u003e\n\u003cli\u003eVanilla is one of six Ampero Mini colourways, alongside Marigold, Orange, Matcha, Mustard, and Purple Taro.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\"\u003c\/strong\u003e 800 x 480 touchscreen – full patch\/effect editing, with on-screen quick-access parameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2\u003c\/strong\u003e footswitches – FS1 patch down, FS2 patch up; hold FS1 for CTRL 1, hold FS2 for tap tempo; press both for the tuner, hold both for the looper.\u003c\/li\u003e\n\u003cli\u003eTap divide setting for tempo-based effects (1\/1 to 1\/16, including dotted and triplet values).\u003c\/li\u003e\n\u003cli\u003eVOLUME knob for overall output level.\u003c\/li\u003e\n\u003cli\u003eNo power switch: the unit turns on when the power supply is connected.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e – 1\/4\" TS instrument jack (\u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e) for electric and acoustic instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e – one 1\/4\" TRS unbalanced stereo jack (\u003cstrong\u003e1 kΩ\u003c\/strong\u003e); use a Y-cable for separate left\/right feeds (Tip = Left, Ring = Right).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEXP\/CTRL\u003c\/strong\u003e – 1\/4\" TRS for an expression pedal or a dual footswitch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAux In\u003c\/strong\u003e – 1\/8\" stereo (\u003cstrong\u003e10 kΩ\u003c\/strong\u003e); \u003cstrong\u003ePhones\u003c\/strong\u003e – 1\/8\" stereo (\u003cstrong\u003e22 Ω\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e – USB 2.0 Type-C, USB Audio 2.0; plug and play on macOS, ASIO driver for Windows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e – \u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, \u003cstrong\u003e500 mA\u003c\/strong\u003e max. No battery operation. No MIDI jacks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAmpero Mini processor, Vanilla\u003c\/li\u003e\n\u003cli\u003e9V DC power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAmpero Mini (MP-50VN, Vanilla)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCompact amp modeler \/ multi-effects processor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScreen\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4\"\u003c\/strong\u003e \u003cstrong\u003e800 x 480\u003c\/strong\u003e color touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects \/ modules \/ patches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e199\u003c\/strong\u003e \/ \u003cstrong\u003e9\u003c\/strong\u003e simultaneous \/ \u003cstrong\u003e198\u003c\/strong\u003e (\u003cstrong\u003e99\u003c\/strong\u003e user + \u003cstrong\u003e99\u003c\/strong\u003e factory)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmp \/ cab models\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e52\u003c\/strong\u003e \/ \u003cstrong\u003e50\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e2\u003c\/strong\u003e onboard; \u003cstrong\u003e2\u003c\/strong\u003e more via external footswitch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProcessing\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\u003c\/strong\u003e \/ \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e, \u003cstrong\u003e112 dB\u003c\/strong\u003e max dynamic range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLooper\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e100 s\u003c\/strong\u003e mono \/ \u003cstrong\u003e50 s\u003c\/strong\u003e stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrum machine\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e100\u003c\/strong\u003e rhythm patterns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e1 x 1\/4\" TRS unbalanced stereo (Y-cable for L\/R) + 1\/8\" headphones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInputs\u003c\/th\u003e\n\u003ctd\u003e1\/4\" TS instrument; 1\/4\" TRS EXP\/CTRL; 1\/8\" Aux In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMIDI\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Type-C, USB Audio 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpedance\u003c\/th\u003e\n\u003ctd\u003eInput \u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e; Aux \u003cstrong\u003e10 kΩ\u003c\/strong\u003e; output \u003cstrong\u003e1 kΩ\u003c\/strong\u003e; headphones \u003cstrong\u003e22 Ω\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e500 mA\u003c\/strong\u003e max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e5.3 x 4.7 x 1.9 in\u003c\/strong\u003e (\u003cstrong\u003e134 x 120 x 49 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1.2 lb\u003c\/strong\u003e (\u003cstrong\u003e529 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Ampero Mini support NAM?\u003c\/strong\u003e There is no onboard NAM module. Ampero Mini has Sound Clone (firmware V2.2 and later): up to \u003cstrong\u003e10\u003c\/strong\u003e clone files imported through Ampero Editor, one usable at a time. Ampero Editor V1.6.0 adds NAM A2 file conversion for that workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Vanilla colourway mean?\u003c\/strong\u003e Vanilla is one of Hotone's own colourways for Ampero Mini, sold alongside Marigold, Orange, Matcha, Mustard, and Purple Taro.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I get stereo output from a single output jack?\u003c\/strong\u003e The unit has one 1\/4\" TRS stereo output; use a TRS Y-cable to split it into separate left and right 1\/4\" feeds (Tip = Left, Ring = Right).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich footswitch or expression pedal works with it?\u003c\/strong\u003e The EXP\/CTRL jack takes Hotone Ampero Press or Ampero Switch; the Ampero Switch adds footswitches FS 3 and FS 4.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e \u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative with at least \u003cstrong\u003e500 mA\u003c\/strong\u003e; a 9V adapter is included. It does not run on batteries and has no power switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it with bass?\u003c\/strong\u003e Yes. It includes dedicated bass amp models and bass presets, and the instrument input works with electric and acoustic instruments.\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"Default Title","offer_id":43933379494141,"sku":"888506050152","price":329.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/hotone-ampero-mini-front-touchscreen.jpg?v=1785939797"},{"product_id":"t-rex-binson-echorec-delay","title":"T-Rex Binson Echorec Magnetic Drum Delay, 4 Playback Heads, Repeat\/Swell, Balanced XLR I\/O","description":"\u003cp\u003eThe legendary magnetic-drum delay, reborn — T-Rex's Binson Echorec recreates the mechanical drum echo heard on classic recordings by David Gilmour and Hank Marvin, using a real rotating drum and physical recording and playback heads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose this pedal\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReal magnetic-drum echo — a custom alloy drum spins past physical recording and playback heads for the authentic Binson voice.\u003c\/li\u003e\n\u003cli\u003eTwo recording heads (short and long) plus four individually switchable playback heads, each with its own level control.\u003c\/li\u003e\n\u003cli\u003eRepeat\/Swell switch changes between standard delay (repeats decay away) and swell (overlapping repeats act like a lush reverb-delay hybrid).\u003c\/li\u003e\n\u003cli\u003eDrum Speed control adjustable \u003cstrong\u003e±20%\u003c\/strong\u003e for pitch and rhythm modulation effects.\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and unbalanced 1\/4\" inputs and outputs for both studio and live rigs.\u003c\/li\u003e\n\u003cli\u003eMagic Eye level meter and hand-built-in-Denmark construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEcho Volume — mix of the wet echo signal.\u003c\/li\u003e\n\u003cli\u003eRecord Head Selector — Rec 1 (short) or Rec 2 (long); Head 2 sits at three times the spacing of Head 1.\u003c\/li\u003e\n\u003cli\u003eDrum Speed — \u003cstrong\u003e±20%\u003c\/strong\u003e speed variation for pitch and rhythm modulation; the center position matches the original unit's speed. Slower speeds add low end, faster speeds brighten the repeats.\u003c\/li\u003e\n\u003cli\u003eRecord Level — how hard the signal is recorded onto the drum; high settings add compression, overdrive and fuzz. The Magic Eye shows input strength and saturation.\u003c\/li\u003e\n\u003cli\u003ePlayback Heads 1–4 — individual on\/off selectors; combine any set for multi-tap patterns.\u003c\/li\u003e\n\u003cli\u003eRepeat — feedback amount; controls how many times the pattern repeats.\u003c\/li\u003e\n\u003cli\u003eRepeat\/Swell Switch — standard delay or reverb-like overlapping echoes. Swell works independently of the playback selectors; with all heads off, the swells come without repeats.\u003c\/li\u003e\n\u003cli\u003eEcho Tone — rolls off the high frequencies of the repeats.\u003c\/li\u003e\n\u003cli\u003eBypass Switch — engages the effect; hold it for more than \u003cstrong\u003e2 seconds\u003c\/strong\u003e in bypass to stop the drum.\u003c\/li\u003e\n\u003cli\u003ePlayback Level Trimmers — rear-mounted per-head trim controls, factory pre-set, adjustable with a small flat screwdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" input and balanced XLR input — accepts instruments, effects pedals or line-level signals.\u003c\/li\u003e\n\u003cli\u003e1\/4\" output and balanced XLR output.\u003c\/li\u003e\n\u003cli\u003eExpression pedal input for Drum Speed control on the fly (\u003cstrong\u003e±20%\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003eExternal bypass input for a momentary footswitch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24V DC\u003c\/strong\u003e only, center-negative, \u003cstrong\u003e2.0 mm\u003c\/strong\u003e center pin — dedicated supply included; do not substitute a standard 9V or 12V supply.\u003c\/li\u003e\n\u003cli\u003eCurrent draw \u003cstrong\u003e300 mA\u003c\/strong\u003e at 24V DC.\u003c\/li\u003e\n\u003cli\u003eNo battery operation — the drum motor runs from the included supply.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eT-Rex Binson Echorec\u003c\/li\u003e\n\u003cli\u003e24V DC power supply with interchangeable plug blades (USA, Europe, Australia, UK)\u003c\/li\u003e\n\u003cli\u003eBinson oil for drum lubrication\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCare\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClean the drum with a lint-free cloth dampened with isopropyl alcohol, reaching it between Record Heads 1 and 2.\u003c\/li\u003e\n\u003cli\u003eClean the heads by sliding paper between the heads and the drum while turning the drum.\u003c\/li\u003e\n\u003cli\u003eLubricate the drum with the included Binson oil at the lowest speed setting; clean the mechanism if mechanical noise increases.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eT-Rex Binson Echorec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect type\u003c\/th\u003e\n\u003ctd\u003eMagnetic-drum delay (mechanical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeads\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e2\u003c\/strong\u003e record (short\/long), \u003cstrong\u003e4\u003c\/strong\u003e switchable playback\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrum speed\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e±20%\u003c\/strong\u003e around approx. \u003cstrong\u003e32 m\/min\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControls\u003c\/th\u003e\n\u003ctd\u003eEcho Volume, Record Head Selector, Drum Speed, Record Level, Playback Heads 1–4, Repeat, Repeat\/Swell, Echo Tone, Bypass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInputs\u003c\/th\u003e\n\u003ctd\u003e1\/4\" jack, XLR balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e1\/4\" jack, XLR balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl inputs\u003c\/th\u003e\n\u003ctd\u003eExpression (drum speed), external bypass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003eapprox. \u003cstrong\u003e500 kΩ\u003c\/strong\u003e at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput impedance\u003c\/th\u003e\n\u003ctd\u003eapprox. \u003cstrong\u003e1 kΩ\u003c\/strong\u003e at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24V DC\u003c\/strong\u003e center-negative, \u003cstrong\u003e2.0 mm\u003c\/strong\u003e pin, \u003cstrong\u003e300 mA\u003c\/strong\u003e (supply included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (incl. knobs)\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9.84 × 7.48 × 3.94 in\u003c\/strong\u003e (\u003cstrong\u003e250 × 190 × 100 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e5.73 lb\u003c\/strong\u003e (\u003cstrong\u003e2.6 kg\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade in\u003c\/th\u003e\n\u003ctd\u003eDenmark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e2 years\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a real magnetic-drum delay?\u003c\/strong\u003e Yes — a custom alloy drum physically rotates past a set of recording and playback heads. It is not a digital emulation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it different from the Replicator D'Luxe?\u003c\/strong\u003e Both are mechanical, real-media delays from T-Rex. The Binson Echorec records onto a rotating magnetic drum with four playback heads and a Repeat\/Swell mode, for chiming, multi-tap repeats; the Replicator D'Luxe uses a moving tape loop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use a standard 9V pedalboard supply?\u003c\/strong\u003e No — the Echorec requires the included \u003cstrong\u003e24V DC\u003c\/strong\u003e \/ \u003cstrong\u003e300 mA\u003c\/strong\u003e supply (center-negative, 2.0 mm pin). Do not substitute a 9V or 12V brick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the XLR output work with a mixer or PA?\u003c\/strong\u003e Yes — the balanced XLR input and output let you run the Echorec from a mixing console for studio work or live applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does it sit in my chain?\u003c\/strong\u003e It accepts instrument, effects-pedal and line-level signals, so it works after your drives, in an amp effects loop or on a console send. Set Record Level by watching the Magic Eye.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I stop the drum when I'm not playing?\u003c\/strong\u003e Hold the bypass switch for more than 2 seconds while in bypass and the drum stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I control drum speed with my foot?\u003c\/strong\u003e Yes — connect an expression pedal to the EXP input to sweep drum speed by ±20%.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty?\u003c\/strong\u003e 2-year manufacturer warranty.\u003c\/p\u003e","brand":"T-Rex","offers":[{"title":"Default Title","offer_id":43958866247933,"sku":"811059012001","price":2499.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/t-rex-binson-echorec-front.jpg?v=1785529083"},{"product_id":"hotone-ampero-press-sp-30h","title":"Hotone Ampero Press SP-30H Passive Volume\/Expression Pedal, 25kΩ Edition","description":"\u003cp\u003e\u003cstrong\u003eThe Hotone Ampero Press 25kΩ Edition (SP-30H) is the passive volume\/expression pedal for hosts that call for a 25 kΩ expression pedal, designed first of all for Hotone's Ampero II Stomp.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is the same compact 2-in-1 Press-family pedal as the standard Ampero Press, with a 25 kΩ expression pot instead of 10 kΩ. Independent volume and expression output jacks let you control volume and an expression parameter at the same time. Ampero II Stomp supports it from firmware V1.1.0 or above; it also works with other devices whose external EXP jack requires 25 kΩ, and as a standalone passive volume pedal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Ampero Press 25kΩ Edition\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePurpose-matched pot value: a \u003cstrong\u003e25 kΩ\u003c\/strong\u003e expression pot for devices that require 25 kΩ EXP resistance, such as Ampero II Stomp.\u003c\/li\u003e\n\u003cli\u003eFully passive: no battery, no DC jack, nothing to charge or replace.\u003c\/li\u003e\n\u003cli\u003eSame Press-family aluminum alloy enclosure and \u003cstrong\u003e100 kΩ\u003c\/strong\u003e volume pot as the standard Ampero Press, so it drops onto the same pedalboard footprint.\u003c\/li\u003e\n\u003cli\u003eSimultaneous volume and expression: independent volume and expression outputs send an expression signal while the main path still carries your volume-controlled signal.\u003c\/li\u003e\n\u003cli\u003eStraightforward, mechanically simple control surface – treadle only, nothing to misconfigure before a gig.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTreadle – the only control; sweeps the \u003cstrong\u003e100 kΩ\u003c\/strong\u003e volume pot and the \u003cstrong\u003e25 kΩ\u003c\/strong\u003e expression pot together.\u003c\/li\u003e\n\u003cli\u003eNo footswitch, no mode switch – fully passive control surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAmpero II Stomp – supported in firmware V1.1.0 or above.\u003c\/li\u003e\n\u003cli\u003eOther devices with an external EXP jack that requires 25 kΩ.\u003c\/li\u003e\n\u003cli\u003eAny rig as a passive volume pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAmpero Press 25kΩ Edition pedal (cables sold separately)\u003c\/li\u003e\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAmpero Press 25kΩ Edition (SP-30H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePassive volume \/ expression pedal (2-in-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVolume pot\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e100 kΩ\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpression pot\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e25 kΩ\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003eIndependent volume and expression outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eNone – fully passive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.2 x 6.4 x 2.0 in\u003c\/strong\u003e (\u003cstrong\u003e81 x 162 x 51 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e15.2 oz\u003c\/strong\u003e (\u003cstrong\u003e430 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I choose this over the standard Ampero Press?\u003c\/strong\u003e Choose this edition when your host device requires a 25 kΩ expression pedal – Ampero II Stomp is the device it is designed for. The standard Ampero Press (SP-30) uses a 10 kΩ expression pot for devices rated for 10 kΩ.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Ampero II Stomp firmware do I need?\u003c\/strong\u003e Support for the 25kΩ Edition is implemented in Ampero II Stomp firmware \u003cstrong\u003eV1.1.0\u003c\/strong\u003e or above.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pedal powered?\u003c\/strong\u003e No, it is fully passive with no DC jack or battery compartment, identical in that respect to the standard Ampero Press.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the physical difference versus the standard Ampero Press?\u003c\/strong\u003e None beyond the expression pot value – housing, 100 kΩ volume pot, dimensions (\u003cstrong\u003e81 x 162 x 51 mm\u003c\/strong\u003e) and weight (\u003cstrong\u003e430 g\u003c\/strong\u003e) are the same.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this control volume and expression at the same time?\u003c\/strong\u003e Yes, the independent expression output sends an expression signal to a second device while the main signal path is still volume-controlled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pedal have a footswitch?\u003c\/strong\u003e No, it is treadle-only, matching the standard Ampero Press control layout.\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"Default Title","offer_id":44022487941373,"sku":"888506040085","price":109.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/hotone-ampero-press-sp-30h-angled.jpg?v=1785939759"},{"product_id":"valeton-dapper-mini","title":"Valeton Dapper Mini MES-1 Guitar Effects Strip, Tuner, OD\/Distortion, Chorus, Tap Delay","description":"\u003cp\u003e\u003cstrong\u003eNeed drive, chorus and delay without hauling three pedals to practice?\u003c\/strong\u003e The Dapper Mini packs a tuner, an OD\/DIST-switchable drive, a chorus and a tap-tempo delay into a \u003cstrong\u003e197 mm\u003c\/strong\u003e metal strip, with a cab-sim headphone output so you can practice without waking the house.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Dapper Mini\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe OD\/DIST toggle on the DRIVE module gives you two gain characters from one control set — a warm, thick overdrive or a British-style high-gain distortion — instead of needing separate overdrive and distortion pedals.\u003c\/li\u003e\n\u003cli\u003eThe analog-voiced DELAY module goes up to \u003cstrong\u003e1000 ms\u003c\/strong\u003e and has tap tempo, so you can match delay time to the song on the fly.\u003c\/li\u003e\n\u003cli\u003eThe adjustable PHONES output includes a cab simulator, so headphone practice still sounds like an amp instead of a raw DI signal; it also works as a line out for recording or a PA.\u003c\/li\u003e\n\u003cli\u003eHold the CHORUS module's footswitch to access the built-in tuner; the output mutes while you tune.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhich Dapper effects strip fits your playing?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Dapper Mini covers compact electric-guitar essentials. The Dapper Indie is a wider 320 mm board with two gain stages (Indie Drive and Fuzz Wall) plus modulation, delay and ambient modules; the Dapper Acoustic Mini swaps drive, chorus and delay for a compressor, an EQ preamp with notch filter and reverb for acoustic-electric guitar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControls and modules\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTUNER — first in the chain; hold the CHORUS footswitch to engage it.\u003c\/li\u003e\n\u003cli\u003eDRIVE — VOL, TONE and GAIN knobs with an OD\/DIST toggle.\u003c\/li\u003e\n\u003cli\u003eCHORUS — LEVEL, RATE and DEPTH knobs.\u003c\/li\u003e\n\u003cli\u003eDELAY — LEVEL, REGEN and TIME knobs, up to \u003cstrong\u003e1000 ms\u003c\/strong\u003e; hold the DELAY footswitch to enter tap tempo, then tap along (the TAP\/PHONES LED pulses with the set time); hold again to return to knob-set time.\u003c\/li\u003e\n\u003cli\u003eTAP\/PHONES — knob sets headphone output level; PHONES output with built-in cab simulation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" INPUT and OUTPUT jacks; PHONES jack with cab sim, also usable as a line out.\u003c\/li\u003e\n\u003cli\u003eRuns on \u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e at \u003cstrong\u003e110 mA\u003c\/strong\u003e current draw. No battery operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eValeton Dapper Mini effects strip\u003c\/li\u003e\n\u003cli\u003e9V DC power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eValeton Dapper Mini (MES-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCombined effects strip for electric guitar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModules\u003c\/th\u003e\n\u003ctd\u003eTUNER, DRIVE (OD\/DIST), CHORUS, DELAY (tap tempo), PHONES with cab sim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax delay time\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e1000 ms\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitches\u003c\/th\u003e\n\u003ctd\u003eDRIVE, CHORUS (hold: tuner), DELAY (hold: tap tempo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e1\/4\" INPUT, 1\/4\" OUTPUT, PHONES, 9V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, \u003cstrong\u003e110 mA\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e7.8 x 2.6 x 1.7 in\u003c\/strong\u003e (\u003cstrong\u003e197 x 65 x 42 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e14.7 oz\u003c\/strong\u003e (\u003cstrong\u003e417 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with a power adapter?\u003c\/strong\u003e Yes, a 9V DC center-negative adapter is included. Any replacement or shared supply output should be rated for at least 110 mA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the maximum delay time?\u003c\/strong\u003e Up to 1000 ms. Set it with the TIME knob, or hold the DELAY footswitch to tap it in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the headphone output sound like a real amp?\u003c\/strong\u003e The PHONES output includes a built-in cab simulator, so it's shaped for headphone practice rather than a raw DI signal, and it can also feed a recorder or PA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I access the tuner?\u003c\/strong\u003e Hold the CHORUS module's footswitch; the unit mutes and the tuner activates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I run it on batteries?\u003c\/strong\u003e No, it runs only from a 9V DC adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the Dapper Indie?\u003c\/strong\u003e Dapper Indie is a wider 320 mm board with two gain stages (Indie Drive and Fuzz Wall) and more modulation, delay and ambient options; the Dapper Mini is a compact single-drive, single-delay strip.\u003c\/p\u003e","brand":"Valeton","offers":[{"title":"Mini chitarra Dapper","offer_id":44022487974141,"sku":"888506820052","price":94.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/valeton-dapper-mini-silver-angled-delay-chorus-drive.jpg?v=1785861876"},{"product_id":"valeton-dapper-acoustic-mini","title":"Valeton Dapper Acoustic Mini MES-4 Acoustic Effects Strip, Comp, EQ Preamp with Notch, XLR","description":"\u003cp\u003e\u003cstrong\u003eFeedback-prone acoustic-electric onstage?\u003c\/strong\u003e The Dapper Acoustic Mini gives you a notch filter and 3-band EQ preamp to tame the ring before it howls, a warm compressor to even out your pick attack, and a one-knob reverb — then sends a clean balanced signal to the mixer over XLR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy acoustic guitarists choose the Dapper Acoustic Mini\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe notch filter and EQ preamp target the specific frequency where your acoustic-electric feeds back, so you can play louder without the sudden howl.\u003c\/li\u003e\n\u003cli\u003eA rack-style COMP module with its own attack control evens out pick-attack volume spikes for a more consistent DI signal to front of house.\u003c\/li\u003e\n\u003cli\u003eBalanced XLR output goes straight into a mixer or interface without a separate DI box, and the 1\/4\" output can feed your acoustic amp at the same time.\u003c\/li\u003e\n\u003cli\u003eAn adjustable PHONES output with cab simulation lets you practice with effects engaged, without an amp.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhich Dapper effects strip fits your playing?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Dapper Mini is the electric-guitar version with drive, chorus and tap delay; the Dapper Indie is a wider ambient\/indie board for electric guitar. The Dapper Acoustic Mini here is built specifically for acoustic-electric players who need EQ, notch filtering and a balanced DI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControls and modules\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTUNER — press and hold the REVERB footswitch to engage it; the output mutes while tuning, and \u003cstrong\u003e7\u003c\/strong\u003e bi-color LEDs show the note name.\u003c\/li\u003e\n\u003cli\u003eCOMP — COMP and ATK (attack) knobs for rack-mount-style compression.\u003c\/li\u003e\n\u003cli\u003ePREAMP — 3-band EQ, a dedicated notch filter for feedback control and a volume control.\u003c\/li\u003e\n\u003cli\u003eREVERB — single-knob reverb for natural, clear decay.\u003c\/li\u003e\n\u003cli\u003ePHONES — level knob for the headphone output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" INPUT and 1\/4\" OUTPUT jacks.\u003c\/li\u003e\n\u003cli\u003eXLR OUT for a balanced signal to a mixer, audio interface or recorder.\u003c\/li\u003e\n\u003cli\u003ePHONES output for silent practice; all outputs can be used at the same time.\u003c\/li\u003e\n\u003cli\u003eRuns on \u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e at \u003cstrong\u003e140 mA\u003c\/strong\u003e current draw. It is not powered by phantom power — switch phantom power off on the mixer channel before connecting the XLR output. No battery operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eValeton Dapper Acoustic Mini effects strip\u003c\/li\u003e\n\u003cli\u003e9V DC power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eValeton Dapper Acoustic Mini (MES-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCombined effects strip for acoustic-electric guitar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModules\u003c\/th\u003e\n\u003ctd\u003eTUNER, COMP (with attack), PREAMP (3-band EQ + notch filter + volume), REVERB, PHONES with cab sim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e1\/4\" INPUT, 1\/4\" OUTPUT, XLR OUT (balanced), PHONES, 9V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, \u003cstrong\u003e140 mA\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e7.8 x 2.6 x 1.7 in\u003c\/strong\u003e (\u003cstrong\u003e197 x 65 x 42 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e15.3 oz\u003c\/strong\u003e (\u003cstrong\u003e435 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this stop my acoustic-electric from feeding back?\u003c\/strong\u003e The PREAMP module's notch filter is designed to target the specific ringing frequency that causes acoustic feedback, used alongside the 3-band EQ.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I run this on phantom power from my mixer?\u003c\/strong\u003e No. It needs its 9V DC adapter; switch phantom power off before connecting the XLR output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e A 9V DC center-negative adapter rated for at least 140 mA; one is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a headphone output for silent practice?\u003c\/strong\u003e Yes, an adjustable PHONES output with cab simulation for practicing with effects engaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the XLR and 1\/4\" outputs together?\u003c\/strong\u003e Yes, all outputs can be used at the same time — for example XLR to the PA and 1\/4\" to a stage amp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it have a tuner?\u003c\/strong\u003e Yes. Press and hold the REVERB footswitch; the output mutes while you tune.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the Dapper Mini?\u003c\/strong\u003e The Dapper Mini is built for electric guitar (drive, chorus, delay); the Dapper Acoustic Mini swaps those for a compressor, acoustic EQ preamp with notch filter and reverb, and adds an XLR output.\u003c\/p\u003e","brand":"Valeton","offers":[{"title":"Default Title","offer_id":44022488006909,"sku":"888506820083","price":119.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/valeton-dapper-acoustic-mini-gold-angled-top-reverb-preamp-comp.jpg?v=1785861856"},{"product_id":"valeton-rushead-max-bass-rh-101-headphone-amp","title":"Valeton Rushead Max Bass RH-101 Pocket Headphone Bass Amp, Mod \u0026 Echo\/Reverb, AUX In","description":"\u003cp\u003e\u003cstrong\u003eWant to practice bass through headphones without lugging an amp?\u003c\/strong\u003e The Rushead Max Bass plugs straight into your bass, running world-class bass amp models plus switchable modulation and ambient effects through a \u003cstrong\u003e5-hour\u003c\/strong\u003e rechargeable battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy bassists choose the Rushead Max Bass\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePlugs directly into your bass — no amp, no cables to a separate unit, just headphones for silent practice anywhere.\u003c\/li\u003e\n\u003cli\u003eClean, overdrive and distortion voicings modeled on world-class bass amplifiers cover a wide practice tone range.\u003c\/li\u003e\n\u003cli\u003eA switchable mod module (FLOW \/ TREM \/ DEEP) and ambient module (ECHO \/ REVERB \/ ECHOVERB) add texture without extra pedals.\u003c\/li\u003e\n\u003cli\u003eAn AUX input lets you play along with songs or backing tracks from your phone or audio player.\u003c\/li\u003e\n\u003cli\u003eUp to \u003cstrong\u003e5 hours\u003c\/strong\u003e of playing from a USB-rechargeable lithium battery — charge it like a phone.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRushead Max RH-100 vs Rushead Max Bass (RH-101)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSame size, weight and battery runtime as the Rushead Max (RH-100) for guitar — the difference is the voicing set (bass amps vs guitar amps) and the effects: this bass version offers ECHO, REVERB and a combined ECHOVERB, while the guitar version has reverb and delay. Choose based on your instrument.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\u003c\/strong\u003e knobs: LEVEL (overall volume), TONE (tone balance), AMBIENT (ambient effect amount), MOD (modulation amount), GAIN.\u003c\/li\u003e\n\u003cli\u003eAmp types: CL (clean, natural tone based on vintage SVT-style amps), OD (warm overdrive based on a US-style amp) and DIST (grainy distortion based on Finnish bass amps).\u003c\/li\u003e\n\u003cli\u003eSwitchable mod module: FLOW (chorus) \/ TREM (optical-style tremolo) \/ DEEP (flanger).\u003c\/li\u003e\n\u003cli\u003eSwitchable ambient module: ECHO (warm, analog-style echo) \/ REVERB (clean hall-style reverb) \/ ECHOVERB (echo and reverb combined).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in plug goes straight into the bass's output jack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8\"\u003c\/strong\u003e stereo PHONES output for headphones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8\"\u003c\/strong\u003e stereo AUX IN for backing tracks.\u003c\/li\u003e\n\u003cli\u003eUSB charging port and battery-level LED; up to \u003cstrong\u003e5 hours\u003c\/strong\u003e per charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eValeton Rushead Max Bass (RH-101)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePlug-in pocket headphone amplifier for bass guitar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmp types\u003c\/th\u003e\n\u003ctd\u003eCL (clean), OD (overdrive), DIST (distortion)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMod module\u003c\/th\u003e\n\u003ctd\u003eFLOW (chorus) \/ TREM (tremolo) \/ DEEP (flanger)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmbient module\u003c\/th\u003e\n\u003ctd\u003eECHO \/ REVERB \/ ECHOVERB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControls\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e5\u003c\/strong\u003e knobs (LEVEL, TONE, AMBIENT, MOD, GAIN)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJacks\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1\/8\"\u003c\/strong\u003e PHONES out, \u003cstrong\u003e1\/8\"\u003c\/strong\u003e AUX IN, USB charging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eBuilt-in lithium battery, up to \u003cstrong\u003e5 hours\u003c\/strong\u003e, USB charging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.94 × 3.48 × 1.24 in\u003c\/strong\u003e (\u003cstrong\u003e100 × 88.5 × 31.5 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e2.4 oz\u003c\/strong\u003e (\u003cstrong\u003e68 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the battery last?\u003c\/strong\u003e Up to \u003cstrong\u003e5 hours\u003c\/strong\u003e per charge on the built-in lithium battery, charged over USB.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it plug directly into my bass?\u003c\/strong\u003e Yes, it's a plug-in pocket headphone amp — no separate amp or cabinet needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I play along with songs?\u003c\/strong\u003e Yes. Connect a phone or audio player to the \u003cstrong\u003e1\/8\"\u003c\/strong\u003e AUX IN and you hear it with your bass in the headphones.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference from the guitar version?\u003c\/strong\u003e The Rushead Max Bass uses bass amp voicings and an ECHO \/ REVERB \/ ECHOVERB ambient module; the Rushead Max (RH-100) uses guitar amp voicings with reverb and delay. Same size and battery otherwise.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ambient effects does it have?\u003c\/strong\u003e Switchable echo, reverb, or a combined echo+reverb (ECHOVERB).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do FLOW, TREM and DEEP mean?\u003c\/strong\u003e FLOW is chorus, TREM is an optical-style tremolo and DEEP is flanger; the MOD knob sets the amount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the unit weight?\u003c\/strong\u003e \u003cstrong\u003e68 g\u003c\/strong\u003e (\u003cstrong\u003e2.4 oz\u003c\/strong\u003e).\u003c\/p\u003e","brand":"Valeton","offers":[{"title":"Bass","offer_id":44022488563965,"sku":"888506830228","price":54.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/valeton-rushead-max-bass-front-view-control-knobs.jpg?v=1785863439"},{"product_id":"hotone-karat-cap-footswitch-covers-10-pack","title":"Hotone Karat Cap FSC-1 Transparent Footswitch Toppers, Diamond-Shaped Polycarbonate, 10-Pack","description":"\u003cp\u003e\u003cstrong\u003eHotone Karat Cap is a diamond-shaped, transparent polycarbonate footswitch cap that improves stomp accuracy and comfort on Ampero and most other effect pedal footswitches, especially ones with halo LEDs.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Karat Cap\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDiamond-shaped profile gives your foot a clearer target and more confident stomp than a bare metal footswitch, especially in low light on stage.\u003c\/li\u003e\n\u003cli\u003eTransparent polycarbonate lets halo LEDs shine through, so on-state indicators stay visible instead of being blocked by an opaque cap.\u003c\/li\u003e\n\u003cli\u003eDesigned for Ampero and most effect pedals, so it is not locked to a single Hotone model.\u003c\/li\u003e\n\u003cli\u003eLightweight at \u003cstrong\u003e2.65 g\u003c\/strong\u003e per cap, with a \u003cstrong\u003e30 mm\u003c\/strong\u003e wide top and a \u003cstrong\u003e10 mm\u003c\/strong\u003e opening for the footswitch button.\u003c\/li\u003e\n\u003cli\u003eSold as a pack of \u003cstrong\u003e10\u003c\/strong\u003e, so you can cap every footswitch on your board in one purchase instead of piecing together singles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for Hotone Ampero processors and fits most common effect pedal footswitches.\u003c\/li\u003e\n\u003cli\u003eEspecially useful on footswitches with halo LED rings, where an opaque topper would hide the status light.\u003c\/li\u003e\n\u003cli\u003ePassive accessory: no power, no wiring and no effect on your signal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e10\u003c\/strong\u003e Karat Cap footswitch caps\u003c\/li\u003e\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eKarat Cap (FSC-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTransparent footswitch cap \/ topper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eDiamond-shaped\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1.18 in\u003c\/strong\u003e (\u003cstrong\u003e30 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e0.31 in\u003c\/strong\u003e (\u003cstrong\u003e8 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpening\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e0.39 in\u003c\/strong\u003e (\u003cstrong\u003e10 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight per cap\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e0.09 oz\u003c\/strong\u003e (\u003cstrong\u003e2.65 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e10\u003c\/strong\u003e caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Karat Cap fit my pedal's footswitch?\u003c\/strong\u003e It is designed for Ampero and fits most common effect pedal footswitches. The opening is \u003cstrong\u003e10 mm\u003c\/strong\u003e; if your pedal uses an unusually large or small button, compare it with this size first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it block LED indicators?\u003c\/strong\u003e No. It is made from transparent polycarbonate so halo LEDs and other footswitch indicators remain visible through the cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many caps come in a pack?\u003c\/strong\u003e \u003cstrong\u003e10\u003c\/strong\u003e caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is Karat Cap made from?\u003c\/strong\u003e Polycarbonate, a durable, impact-resistant transparent plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it change how the footswitch feels underfoot?\u003c\/strong\u003e Its larger, diamond-shaped top gives your foot a bigger target than a bare metal footswitch button, which improves stomp accuracy and comfort.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this on non-Hotone pedals?\u003c\/strong\u003e Yes. It is made for most effect pedals, not only Ampero.\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"Transparent","offer_id":44048360538365,"sku":"888506500183","price":19.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/hotone-karat-cap-set-on-surface.jpg?v=1785939759"},{"product_id":"meris-mercuryx-modular-reverb-system-pedal","title":"Meris MercuryX Modular Reverb System Pedal, 8 Stereo Reverbs, Freeze, 99 Presets, MIDI","description":"\u003cp\u003eThe Meris MercuryX houses eight studio-grade reverb algorithms and \u003cstrong\u003e2.54 seconds\u003c\/strong\u003e of stereo predelay inside a modular, color-screen system built to take pedal reverb to studio-rack depth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Meris MercuryX is this?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMercuryX takes the heart and soul of the compact two-footswitch Meris Mercury7 — keeping its Ultraplate and Cathedra algorithms — and expands it with six more reverbs (78 Room, 78 Plate, 78 Hall, Spring, Prism, and Gravity), \u003cstrong\u003e2.54 seconds\u003c\/strong\u003e of stereo predelay, independent stereo Freeze, gate envelopes, a color-screen UI, \u003cstrong\u003e99\u003c\/strong\u003e presets across \u003cstrong\u003e33\u003c\/strong\u003e banks, an instant tuner, and native 5-pin DIN plus USB-C MIDI. It is built on the modular architecture first introduced in the Meris LVX. Mercury7 remains a compact 6-knob, two-footswitch, 16-preset reverb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the MercuryX\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEight studio-grade reverb algorithms cover everything from tight rooms and plates to vast, otherworldly halls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.54 seconds\u003c\/strong\u003e of stereo predelay, with selectable note divisions for each side and modular feedback routing, lets you separate dry signal from reverb onset for clarity or drama.\u003c\/li\u003e\n\u003cli\u003eIndependent stereo Freeze sustains a reverb wash indefinitely for ambient pads and soundscapes.\u003c\/li\u003e\n\u003cli\u003eGate envelope controls for every reverb type.\u003c\/li\u003e\n\u003cli\u003eModular signal routing and a deep Modifier section for control signals go far beyond a fixed-knob reverb pedal.\u003c\/li\u003e\n\u003cli\u003eColor screen and \u003cstrong\u003e99\u003c\/strong\u003e onboard presets make deep patches easy to build, name, and recall, with a Favorites bank for \u003cstrong\u003e3\u003c\/strong\u003e instant-access presets.\u003c\/li\u003e\n\u003cli\u003eNative 5-pin DIN MIDI In\/Out plus USB-C give full remote control with no external converter box needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eReverbs and Processing\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverb structures:\u003c\/strong\u003e Ultraplate and Cathedra (from Mercury7); 78 Room, 78 Plate and 78 Hall (from the CXM 1978 collaboration with Chase Bliss); Spring; Prism (dual tank with discrete dual mono processing); Gravity (grain-based).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessing elements:\u003c\/strong\u003e dynamics (Compressor, Limiter, Swell, Diffusion, Freeze), preamps (Tube, Transistor, Op-Amp), filters (Ladder, State Variable, Parametric), pitch, and modulation including 79 Chorus, Vibrato, Vowel Mod, Tremolo and Hazy Lo-Fi.\u003c\/li\u003e\n\u003cli\u003eProcessing insert points: Pre + Dry, Pre, Feedback, Pre Tank, and Post.\u003c\/li\u003e\n\u003cli\u003eTrue stereo processing throughout; Prism uses discrete dual mono processing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecay\u003c\/strong\u003e — Sets how long the selected reverb's tail rings out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePredelay\u003c\/strong\u003e — Sets up to \u003cstrong\u003e2.54 seconds\u003c\/strong\u003e of stereo predelay before the reverb onset, separating dry attack from the wash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix\u003c\/strong\u003e — Blends reverb with your dry signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMod\u003c\/strong\u003e — Sets the modulation depth of the predelay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC1 \/ C2 controllers\u003c\/strong\u003e — Edit the parameters shown on screen directly from the front panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC3 controller\u003c\/strong\u003e — Turns to change presets, pushes to enter edit mode, and holds to save — the way to browse MercuryX's \u003cstrong\u003e99\u003c\/strong\u003e presets across \u003cstrong\u003e33\u003c\/strong\u003e banks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 LED buttons (1, 2, 3, Hold Modifier)\u003c\/strong\u003e — Mirror the four footswitches for desktop and studio use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootswitches 1, 2, 3\u003c\/strong\u003e — Engage or bypass presets (hold 1 + 2 for the Favorites bank).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold Modifier footswitch\u003c\/strong\u003e — An envelope generator switch configurable per preset as Momentary, Latching, or Tap Tempo action; set it to Tap Tempo to tap in timing without a dedicated tap footswitch. Hold 3 + Hold Modifier for the tuner.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStereo input and output on separate 1\/4\" jacks; headroom switchable between Instrument and Line\/Synth levels.\u003c\/li\u003e\n\u003cli\u003eDedicated expression pedal jack; the expression pedal can control multiple parameters at once.\u003c\/li\u003e\n\u003cli\u003e5-pin DIN MIDI In and Out: continuous control, preset send\/receive and MIDI beat clock sync.\u003c\/li\u003e\n\u003cli\u003eUSB-C for firmware updates and MIDI over USB (firmware \u003cstrong\u003e1.5\u003c\/strong\u003e and later).\u003c\/li\u003e\n\u003cli\u003eFree prEDITOR desktop editor\/librarian (Mac\/PC) for editing, organizing and sharing presets.\u003c\/li\u003e\n\u003cli\u003ePower: \u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, 2.1 mm barrel, at least \u003cstrong\u003e300 mA\u003c\/strong\u003e. A power supply is not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse an isolated supply output rated for at least \u003cstrong\u003e300 mA\u003c\/strong\u003e. Bypass is selectable between relay true bypass and analog buffered bypass, and a global Spillover setting lets the tail of the previous preset overlap the next one when you switch.\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMeris MercuryX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect type\u003c\/th\u003e\n\u003ctd\u003eModular reverb system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReverb structures\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8\u003c\/strong\u003e: Ultraplate, Cathedra, 78 Room, 78 Plate, 78 Hall, Spring, Prism, Gravity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePredelay\u003c\/th\u003e\n\u003ctd\u003eUp to \u003cstrong\u003e2.54 s\u003c\/strong\u003e, stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePresets\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e99\u003c\/strong\u003e in \u003cstrong\u003e33\u003c\/strong\u003e banks, plus a Favorites bank of \u003cstrong\u003e3\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopology\u003c\/th\u003e\n\u003ctd\u003eDigital (24-bit A\/D and D\/A, 32-bit floating-point DSP, \u003cstrong\u003e48 kHz\u003c\/strong\u003e) with analog mix bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAudio I\/O\u003c\/th\u003e\n\u003ctd\u003eStereo in \/ stereo out, separate 1\/4\" jacks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e1 MΩ\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax input level\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e+9 dBu\u003c\/strong\u003e (Instrument), \u003cstrong\u003e+12.5 dBu\u003c\/strong\u003e (Line\/Synth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e20 Hz – 20 kHz\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal-to-noise ratio\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e115 dB\u003c\/strong\u003e typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBypass\u003c\/th\u003e\n\u003ctd\u003eSelectable relay true bypass or analog buffered bypass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMIDI\u003c\/th\u003e\n\u003ctd\u003e5-pin DIN In and Out; MIDI over USB-C (firmware 1.5+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpression input\u003c\/th\u003e\n\u003ctd\u003eYes, dedicated jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTap tempo\u003c\/th\u003e\n\u003ctd\u003eVia the Hold Modifier footswitch (Tap Tempo action) and MIDI beat clock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, 2.1 mm, at least \u003cstrong\u003e300 mA\u003c\/strong\u003e (supply not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e7.25 × 4.5 × 2 in\u003c\/strong\u003e (\u003cstrong\u003e184 × 114 × 51 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24 oz\u003c\/strong\u003e (\u003cstrong\u003e680 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade in\u003c\/th\u003e\n\u003ctd\u003eDesigned and built in California, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many reverb algorithms does MercuryX have?\u003c\/strong\u003e Eight: Ultraplate, Cathedra, 78 Room, 78 Plate, 78 Hall, Spring, Prism, and Gravity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between MercuryX and Mercury7?\u003c\/strong\u003e MercuryX keeps Mercury7's Ultraplate and Cathedra algorithms and adds six more, plus a color screen, 2.54-second stereo predelay, independent stereo Freeze, processing elements, 99 presets and native MIDI. Mercury7 is the compact 6-knob, two-footswitch, 16-preset version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes MercuryX have a tap-tempo footswitch?\u003c\/strong\u003e Not a dedicated one. The Hold Modifier switch can be configured per preset for Tap Tempo action, and MIDI beat clock sync is also supported.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs MercuryX true stereo?\u003c\/strong\u003e Yes. True stereo processing throughout, with the Prism structure using discrete dual mono processing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes MercuryX have a tuner?\u003c\/strong\u003e Yes. Hold footswitch 3 and the Hold Modifier footswitch together for the instant-access tuner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes MercuryX work with the Meris Preset Switch or need the MIDI I\/O box?\u003c\/strong\u003e No. MercuryX selects presets with its own footswitches and has its own 5-pin DIN MIDI In\/Out jacks plus MIDI over USB-C on firmware 1.5 and later; its EXP jack is a dedicated expression input.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does MercuryX need?\u003c\/strong\u003e \u003cstrong\u003e9V DC, center-negative\u003c\/strong\u003e, 2.1 mm barrel, at least \u003cstrong\u003e300 mA\u003c\/strong\u003e. A power supply is not included.\u003c\/p\u003e","brand":"Meris","offers":[{"title":"Default Title","offer_id":44139065999613,"sku":"850015619076","price":849.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/meris-mercuryx-front.jpg?v=1785534507"},{"product_id":"eventide-riptide-drive-uni-vibe","title":"Eventide Riptide Stereo Overdrive and Uni-Vibe Pedal, 2 Drives, 2 Vibes, Order Swap","description":"\u003cp\u003e\u003cstrong\u003eRiptide puts a Uni-Vibe and a pair of overdrive voices in one stereo box and then lets you decide which one hits first, so the same chord can bloom through a swirling vibe into crunch or be driven hard and then thrown across the stereo field.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRiptide combines two distinct drive voices, Green for a dynamic mid-range crunch and Red for a smoother boosted overdrive, with two Uni-Vibe voices: Green, the traditional Shin-ei style vibe, and Red, a deeper, more phase-forward vibe. Order swapping is the feature that sets it apart from stacking two pedals. If you want modulation without gain, TriceraChorus is the chorus specialist and ModFactor is the multi-algorithm modulation box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Riptide\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo drive voices cover different jobs: Green is a dynamic, mid-focused crunch that cleans up with the volume knob, Red is a smoother boosted overdrive for leads.\u003c\/li\u003e\n\u003cli\u003eTwo Uni-Vibe voices: Green is the traditional Shin-ei style throb, Red is a deeper, phasier take on it.\u003c\/li\u003e\n\u003cli\u003eOrder swapping between Drive and Vibe changes the character completely, which two separate pedals cannot do without repatching.\u003c\/li\u003e\n\u003cli\u003eEverything runs in stereo, so the vibe spreads across two amps or a stereo interface instead of collapsing to one side.\u003c\/li\u003e\n\u003cli\u003eDrive and Vibe each have their own footswitch, so either effect runs alone or both together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\u003c\/strong\u003e onboard presets recall complete drive-and-vibe combinations, with up to \u003cstrong\u003e127\u003c\/strong\u003e available over MIDI.\u003c\/li\u003e\n\u003cli\u003eExpression control can sweep any combination of parameters, for example vibe speed and drive amount together.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDRIVE section:\u003c\/strong\u003e Drive, Tone and Level knobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVIBE section:\u003c\/strong\u003e Vibe (dry\/wet blend, from chorus to pure vibrato), Speed and Intensity knobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice buttons:\u003c\/strong\u003e LED buttons above each footswitch select the Green or Red voice of that section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwap button:\u003c\/strong\u003e places Drive before Vibe or Vibe before Drive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive and Vibe footswitches:\u003c\/strong\u003e dual-action, latching or momentary; in Preset mode they step through presets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatch-up mode\u003c\/strong\u003e helps match knob positions when switching presets or parameters.\u003c\/li\u003e\n\u003cli\u003eRear \u003cstrong\u003eGuitar\/Line\u003c\/strong\u003e and \u003cstrong\u003eMono\/Stereo\u003c\/strong\u003e switches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" TRS input reads a mono signal on the tip or a stereo pair on tip and ring, set by the rear Mono\/Stereo switch; two 1\/4\" TS outputs.\u003c\/li\u003e\n\u003cli\u003eRear Guitar\/Line switch matches the pedal to a guitar, a synth, an effects loop or an audio interface.\u003c\/li\u003e\n\u003cli\u003eEXP jack (1\/4\" TRS) takes an expression pedal, a single aux switch for tap tempo, a triple aux switch for preset up\/down\/load, or MIDI over TRS with a Type A adapter.\u003c\/li\u003e\n\u003cli\u003eMini USB for MIDI and software updates; presets and settings are managed in the free Eventide desktop software for Mac and PC.\u003c\/li\u003e\n\u003cli\u003ePower: \u003cstrong\u003e9V DC center-negative\u003c\/strong\u003e, \u003cstrong\u003e300 mA\u003c\/strong\u003e, 5.5 mm \/ 2.1 mm barrel. Use an isolated output rated 300 mA or more. A universal supply with US, EU, UK, JP and AU plugs is included.\u003c\/li\u003e\n\u003cli\u003eBypass: Buffered, Relay (true bypass), DSP+FX (tails) or Kill Dry for parallel loops.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEventide Riptide pedal\u003c\/li\u003e\n\u003cli\u003eUniversal power supply with US, EU, UK, JP and AU plugs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eStereo digital overdrive and Uni-Vibe pedal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoices\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e2\u003c\/strong\u003e overdrive (Green, Red) and \u003cstrong\u003e2\u003c\/strong\u003e Uni-Vibe (Green, Red), swappable order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e2\u003c\/strong\u003e (Drive, Vibe), latching or momentary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePresets\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e5\u003c\/strong\u003e onboard, up to \u003cstrong\u003e127\u003c\/strong\u003e via MIDI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTap tempo\u003c\/th\u003e\n\u003ctd\u003eVia an aux switch on the EXP jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e1\/4\" TRS: mono on tip, stereo on tip and ring (Mono\/Stereo switch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003eOut 1 and Out 2, 1\/4\" TS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEXP jack\u003c\/th\u003e\n\u003ctd\u003e1\/4\" TRS for expression pedal, aux switch or MIDI I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eMini USB for software updates and MIDI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e700 kOhm\u003c\/strong\u003e mono \/ \u003cstrong\u003e990 kOhm\u003c\/strong\u003e stereo (instrument level)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput impedance\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e220 Ohm\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended load\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e10 kOhm\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum input\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e+8 dBu\u003c\/strong\u003e (Guitar) \/ \u003cstrong\u003e+14 dBu\u003c\/strong\u003e (Line)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBypass\u003c\/th\u003e\n\u003ctd\u003eSelectable: Buffered, Relay, DSP+FX, Kill Dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9V DC\u003c\/strong\u003e center-negative, \u003cstrong\u003e300 mA\u003c\/strong\u003e, 5.5 mm \/ 2.1 mm barrel; universal supply with US, EU, UK, JP and AU plugs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4 x 4.25 x 1.68 in\u003c\/strong\u003e (\u003cstrong\u003e102 x 108 x 43 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1.06 lb\u003c\/strong\u003e (\u003cstrong\u003e0.48 kg\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the drive and the vibe separately?\u003c\/strong\u003e Yes. Drive and Vibe each have their own footswitch and controls, so you can run drive alone, vibe alone, or both together, and the Swap button sets which one comes first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Green and Red drives?\u003c\/strong\u003e Green is a dynamic, mid-focused crunch that cleans up with the guitar's volume knob. Red is a smoother boosted overdrive suited to leads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Green and Red vibes?\u003c\/strong\u003e Green is the traditional Shin-ei style Uni-Vibe throb. Red is a deeper, more phase-forward take on it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Riptide have tap tempo?\u003c\/strong\u003e Yes, through an aux switch connected to the EXP jack. There is no dedicated tap footswitch on the pedal itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it work in stereo?\u003c\/strong\u003e Yes. The TRS input reads a stereo pair on tip and ring when the rear Mono\/Stereo switch is set to Stereo, and there are two outputs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a daisy chain power it?\u003c\/strong\u003e Not reliably. It needs 9V DC center-negative at 300 mA, so use an isolated output rated 300 mA or more. A universal supply with US, EU, UK, JP and AU plugs is included.\u003c\/p\u003e","brand":"Eventide","offers":[{"title":"Default Title","offer_id":44139264803069,"sku":"840694002603-AMZB","price":280.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/eventide-riptide-drive-and-uni-vibe-front-view.jpg?v=1785541799"},{"product_id":"hotone-ampero-control-ec-4-midi-controller","title":"Hotone Ampero Control EC-4 MIDI Foot Controller, 4 Footswitches, 5-Pin, USB \u0026 Bluetooth MIDI","description":"\u003cp\u003e\u003cstrong\u003eThe Hotone Ampero Control EC-4 turns an Ampero processor or any MIDI-equipped rig into a full pedalboard controller, with four programmable footswitches, 100 banks, 5-pin MIDI OUT\/THRU, USB MIDI and Bluetooth MIDI.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach footswitch can send up to \u003cstrong\u003e16\u003c\/strong\u003e MIDI messages (\u003cstrong\u003e32\u003c\/strong\u003e using A\/B groups), with different messages for press and hold actions. Every bank stores the settings of all four footswitches and both CTRL\/EXP jacks, and messages can be routed to separate or combined MIDI outputs. Setup is done in the dedicated mobile app, which includes ready-made templates for many devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Ampero Control\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour footswitches with press and hold actions give you far more live control than a passive dual footswitch, including bank navigation across \u003cstrong\u003e100\u003c\/strong\u003e banks (00-99).\u003c\/li\u003e\n\u003cli\u003eDedicated guide for the Ampero family: connect Ampero Control's MIDI OUT\/THRU into Ampero's MIDI IN, load the \"Ampero (System)\" templates, and add Ampero Switch or Ampero Press to the EXP\/CTRL jacks.\u003c\/li\u003e\n\u003cli\u003eTwo EXP\/CTRL jacks accept expression pedals up to \u003cstrong\u003e10 kΩ\u003c\/strong\u003e max pot resistance or momentary footswitches, so Ampero Press and Ampero Switch plug straight in.\u003c\/li\u003e\n\u003cli\u003eThree ways out: 5-pin MIDI, USB MIDI and Bluetooth MIDI, for multi-effects, loopers, amps, synths, backing-track apps, e-drums and stage lighting with MIDI input.\u003c\/li\u003e\n\u003cli\u003eFlexible power: runs from \u003cstrong\u003e9-18V DC\u003c\/strong\u003e or \u003cstrong\u003e5V\u003c\/strong\u003e via USB, so it fits whatever supply is already on your board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 footswitches\u003c\/strong\u003e – programmable, with separate press and hold messages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-digit LED display\u003c\/strong\u003e – shows MIDI message info and Bluetooth connection status.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 banks (00-99)\u003c\/strong\u003e – navigate large patch libraries without scrolling one at a time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 x EXP\/CTRL jacks\u003c\/strong\u003e – accept expression pedals (max \u003cstrong\u003e10 kΩ\u003c\/strong\u003e) or momentary footswitches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth pairing\u003c\/strong\u003e – hold footswitches 2 and 3 to enter pairing mode for the mobile app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpression calibration\u003c\/strong\u003e – hold footswitch 4 at power-up until \"PdL\" appears.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMIDI IN\u003c\/strong\u003e and \u003cstrong\u003eMIDI OUT\/THRU\u003c\/strong\u003e – 5-pin DIN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e – USB MIDI and 5V bus power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth MIDI\u003c\/strong\u003e – output to one device at a time; working range up to \u003cstrong\u003e5 m\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEXP\/CTRL 1 and 2\u003c\/strong\u003e – 1\/4\" TRS jacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e – \u003cstrong\u003e9-18V DC\u003c\/strong\u003e center-negative (5.5 x 2.1 mm barrel), or \u003cstrong\u003e5V DC\u003c\/strong\u003e via USB; max \u003cstrong\u003e100 mA\u003c\/strong\u003e. No battery operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAmpero Control (EC-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eMIDI foot controller with Bluetooth MIDI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4\u003c\/strong\u003e; up to \u003cstrong\u003e16\u003c\/strong\u003e messages each (\u003cstrong\u003e32\u003c\/strong\u003e with A\/B groups)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBanks\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e100\u003c\/strong\u003e (00-99)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3-digit\u003c\/strong\u003e LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpression input\u003c\/th\u003e\n\u003ctd\u003e2 x EXP\/CTRL 1\/4\" TRS, max \u003cstrong\u003e10 kΩ\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMIDI\u003c\/th\u003e\n\u003ctd\u003e5-pin MIDI IN, MIDI OUT\/THRU; USB MIDI; Bluetooth MIDI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWireless range\u003c\/th\u003e\n\u003ctd\u003eUp to \u003cstrong\u003e5 m\u003c\/strong\u003e (\u003cstrong\u003e16 ft\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9-18V DC\u003c\/strong\u003e center-negative, or \u003cstrong\u003e5V DC\u003c\/strong\u003e USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e100 mA\u003c\/strong\u003e max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e10.2 x 2.2 x 1.9 in\u003c\/strong\u003e (\u003cstrong\u003e258.5 x 55.5 x 49 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e15.5 oz\u003c\/strong\u003e (\u003cstrong\u003e440 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Ampero devices does Ampero Control work with?\u003c\/strong\u003e Any Ampero with a MIDI IN jack, such as the original Ampero (MP-100): connect Ampero Control's MIDI OUT\/THRU to its MIDI IN. Ampero One has no MIDI IN; it can be reached through its USB port with a USB OTG cable and a Bluetooth MIDI bridge app.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum expression pedal resistance it supports?\u003c\/strong\u003e \u003cstrong\u003e10 kΩ\u003c\/strong\u003e on both EXP\/CTRL jacks, which suits Ampero Press.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use Ampero Switch with Ampero Control?\u003c\/strong\u003e Yes. Connect it to EXP\/CTRL 1 or 2 with a TRS cable and set that jack's Type to \"Dual FS\" to add two more switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it need a power adapter or can I run it from USB?\u003c\/strong\u003e Both are supported: \u003cstrong\u003e9-18V DC\u003c\/strong\u003e center-negative via the DC jack, or \u003cstrong\u003e5V DC\u003c\/strong\u003e via USB, drawing a maximum of \u003cstrong\u003e100 mA\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it receive MIDI over Bluetooth or be controlled by other gear?\u003c\/strong\u003e No. Bluetooth MIDI is output only, and Ampero Control cannot currently be controlled by other MIDI devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many banks can I store?\u003c\/strong\u003e \u003cstrong\u003e100\u003c\/strong\u003e banks, numbered 00 through 99; each holds the settings for all four footswitches and both EXP\/CTRL jacks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I calibrate an expression pedal?\u003c\/strong\u003e Hold footswitch 4 while powering on until \"PdL\" appears, fully raise and press the pedal at least three times, then press footswitch 4 to exit.\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"Default Title","offer_id":44139667620093,"sku":"888506080036","price":164.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/hotone-ampero-control-ec-4-front.jpg?v=1785939759"},{"product_id":"hotone-pulze-ap-30wh-modeling-amplifier-white","title":"Hotone Pulze AP-30WH Bluetooth Modeling Amp, Luna White, 30W Stereo, 4\" Touchscreen","description":"\u003cp\u003e\u003cstrong\u003eThe Hotone Pulze AP-30WH (Luna) is a 30W stereo Bluetooth modeling amplifier with a 4\" touchscreen, built for practicing, recording and small-room playing.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePulze combines Hotone's CDCM HD and F.I.R.E. amp modeling with a pair of custom full-range speakers, a USB audio interface and Bluetooth audio in one desktop cabinet. This is the Luna (white) finish; the AP-30BK is the same amp in the other color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Pulze\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo 3.5\" custom full-range speakers in a tuned ABS cabinet, driven by a Class D stereo amp rated at \u003cstrong\u003e30 W\u003c\/strong\u003e (\u003cstrong\u003e15 W + 15 W\u003c\/strong\u003e, 1% THD), with Space+ stereo enhancement.\u003c\/li\u003e\n\u003cli\u003eCDCM HD and F.I.R.E. modeling: \u003cstrong\u003e46\u003c\/strong\u003e amp models, \u003cstrong\u003e48\u003c\/strong\u003e cab models including \u003cstrong\u003e5\u003c\/strong\u003e Celestion speaker IRs, and up to \u003cstrong\u003e20\u003c\/strong\u003e user IRs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" 800x480\u003c\/strong\u003e color touchscreen makes browsing \u003cstrong\u003e177\u003c\/strong\u003e effects (incl. global EQ), up to \u003cstrong\u003e200\u003c\/strong\u003e tones and \u003cstrong\u003e100\u003c\/strong\u003e drum rhythms fast and visual instead of menu-diving with buttons.\u003c\/li\u003e\n\u003cli\u003eUp to \u003cstrong\u003e7\u003c\/strong\u003e effect modules at once with an editable chain order, acoustic simulation effects and tones, a built-in tuner and a Songlist mode for quick tone changes.\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 dual-mode (BLE + audio) streams backing tracks and connects the companion app; Bluetooth MIDI control is supported with third-party bridging software.\u003c\/li\u003e\n\u003cli\u003eUSB-C doubles as a full USB Audio 2.0 interface with \u003cstrong\u003e2-in\/2-out\u003c\/strong\u003e, loopback and reamp support for direct recording into a DAW.\u003c\/li\u003e\n\u003cli\u003eCustomizable on-screen panel, knob styles, theme colors and adjustable ambient lights; a detachable PU leather strap is included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" 800x480\u003c\/strong\u003e color touchscreen – browse and edit tones, amps, cabs, effects and drum patterns.\u003c\/li\u003e\n\u003cli\u003eCompanion app over Bluetooth – tone editing and tone sharing through the Hotone community.\u003c\/li\u003e\n\u003cli\u003eSonglist mode – arrange tones for a set and switch between them quickly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e – one 1\/4\" TS instrument jack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAux In\u003c\/strong\u003e – 1\/8\" stereo, recordable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhones\u003c\/strong\u003e – 1\/8\" stereo headphone output for silent practice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e – USB 2.0 Type-C, USB Audio 2.0 (\u003cstrong\u003e2-in\/2-out\u003c\/strong\u003e, loopback, reamp) and firmware updates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth\u003c\/strong\u003e – 5.0 dual-mode: audio streaming, app control and Bluetooth MIDI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e – \u003cstrong\u003e18V DC\u003c\/strong\u003e center-positive, \u003cstrong\u003e2 A\u003c\/strong\u003e, with the included adapter. This is the opposite polarity of the 9V center-negative standard used across Hotone's pedal range, so do not substitute a pedal power supply.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePulze amplifier (AP-30WH, Luna)\u003c\/li\u003e\n\u003cli\u003e18V DC power adapter\u003c\/li\u003e\n\u003cli\u003eDetachable PU leather strap\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePulze (AP-30WH, Luna)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBluetooth stereo modeling amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput power\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e30 W\u003c\/strong\u003e Class D stereo (\u003cstrong\u003e15 W + 15 W\u003c\/strong\u003e, 1% THD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeakers\u003c\/th\u003e\n\u003ctd\u003eTwo \u003cstrong\u003e3.5\"\u003c\/strong\u003e custom full-range speakers, ABS cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e20 Hz – 20 kHz\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProcessing\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\u003c\/strong\u003e \/ \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e, dual-core DSP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModels\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e46\u003c\/strong\u003e amps, \u003cstrong\u003e48\u003c\/strong\u003e cabs (incl. \u003cstrong\u003e5\u003c\/strong\u003e Celestion IRs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects \/ modules \/ tones\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e177\u003c\/strong\u003e (incl. global EQ) \/ \u003cstrong\u003e7\u003c\/strong\u003e \/ up to \u003cstrong\u003e200\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUser IRs\u003c\/th\u003e\n\u003ctd\u003eUp to \u003cstrong\u003e20\u003c\/strong\u003e, \u003cstrong\u003e24-bit\/44.1 kHz\u003c\/strong\u003e mono WAV, \u003cstrong\u003e1024\u003c\/strong\u003e points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrum machine\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e100\u003c\/strong\u003e rhythm patterns + metronome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScreen\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4\"\u003c\/strong\u003e \u003cstrong\u003e800 x 480\u003c\/strong\u003e color touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e1\/4\" TS input; 1\/8\" Aux In; 1\/8\" headphones; USB 2.0 Type-C (USB Audio 2.0, 2-in\/2-out, loopback + reamp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWireless\u003c\/th\u003e\n\u003ctd\u003eBluetooth 5.0 dual-mode (audio + control, Bluetooth MIDI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e18V DC\u003c\/strong\u003e center-positive, \u003cstrong\u003e2 A\u003c\/strong\u003e (adapter included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e17.9 x 6.3 x 6.7 in\u003c\/strong\u003e (\u003cstrong\u003e455 x 161 x 171 mm\u003c\/strong\u003e, W x D x H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8.4 lb\u003c\/strong\u003e (\u003cstrong\u003e3.8 kg\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eLuna (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does this amp need?\u003c\/strong\u003e \u003cstrong\u003e18V DC\u003c\/strong\u003e, center-positive, \u003cstrong\u003e2 A\u003c\/strong\u003e. The adapter is included. This is the opposite polarity of the 9V center-negative standard on most Hotone pedals, so do not reuse a pedal power adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between AP-30BK and AP-30WH?\u003c\/strong\u003e Only the finish. Both are the same Pulze amplifier with identical specifications; AP-30WH is Luna (white) and AP-30BK is Eclipse (black).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I control it wirelessly?\u003c\/strong\u003e Yes. Bluetooth 5.0 dual-mode (BLE + audio) connects the companion app for editing and streams audio; Bluetooth MIDI control works with third-party bridging software.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I record directly from the amp into my computer?\u003c\/strong\u003e Yes, the USB-C port provides a full USB Audio 2.0 interface with \u003cstrong\u003e2-in\/2-out\u003c\/strong\u003e, loopback and reamp support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I load my own cabinet IRs?\u003c\/strong\u003e Yes, up to \u003cstrong\u003e20\u003c\/strong\u003e user IRs (24-bit\/44.1 kHz mono WAV, 1024 points) alongside \u003cstrong\u003e48\u003c\/strong\u003e cab models and \u003cstrong\u003e5\u003c\/strong\u003e Celestion speaker IRs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I play along with backing tracks?\u003c\/strong\u003e Yes, over Bluetooth audio or through the 1\/8\" Aux In, which is also recordable; the built-in drum machine has \u003cstrong\u003e100\u003c\/strong\u003e patterns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a matching carrying case?\u003c\/strong\u003e Yes, the Hotone PGB-1 Pulze Gig Bag is designed for this amp, with a 600D waterproof shell and EPE foam padding. It is sold separately.\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"Default Title","offer_id":44336845062397,"sku":"888506110016","price":549.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/hotone-pulze-ap-30wh-front-angled.jpg?v=1785939822"},{"product_id":"hotone-pulze-ap-30bk-modeling-amplifier-black","title":"Hotone Pulze AP-30BK Bluetooth Modeling Amp, Eclipse Black, 30W Stereo, 4\" Touchscreen","description":"\u003cp\u003e\u003cstrong\u003eThe Hotone Pulze AP-30BK (Eclipse) is a 30W stereo Bluetooth modeling amplifier with a 4\" touchscreen, built for practicing, recording and small-room playing.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePulze combines Hotone's CDCM HD and F.I.R.E. amp modeling with a pair of custom full-range speakers, a USB audio interface and Bluetooth audio in one desktop cabinet. This is the Eclipse (black) finish; the AP-30WH is the same amp in the other color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Pulze\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo 3.5\" custom full-range speakers in a tuned ABS cabinet, driven by a Class D stereo amp rated at \u003cstrong\u003e30 W\u003c\/strong\u003e (\u003cstrong\u003e15 W + 15 W\u003c\/strong\u003e, 1% THD), with Space+ stereo enhancement.\u003c\/li\u003e\n\u003cli\u003eCDCM HD and F.I.R.E. modeling: \u003cstrong\u003e46\u003c\/strong\u003e amp models, \u003cstrong\u003e48\u003c\/strong\u003e cab models including \u003cstrong\u003e5\u003c\/strong\u003e Celestion speaker IRs, and up to \u003cstrong\u003e20\u003c\/strong\u003e user IRs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" 800x480\u003c\/strong\u003e color touchscreen makes browsing \u003cstrong\u003e177\u003c\/strong\u003e effects (incl. global EQ), up to \u003cstrong\u003e200\u003c\/strong\u003e tones and \u003cstrong\u003e100\u003c\/strong\u003e drum rhythms fast and visual instead of menu-diving with buttons.\u003c\/li\u003e\n\u003cli\u003eUp to \u003cstrong\u003e7\u003c\/strong\u003e effect modules at once with an editable chain order, acoustic simulation effects and tones, a built-in tuner and a Songlist mode for quick tone changes.\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 dual-mode (BLE + audio) streams backing tracks and connects the companion app; Bluetooth MIDI control is supported with third-party bridging software.\u003c\/li\u003e\n\u003cli\u003eUSB-C doubles as a full USB Audio 2.0 interface with \u003cstrong\u003e2-in\/2-out\u003c\/strong\u003e, loopback and reamp support for direct recording into a DAW.\u003c\/li\u003e\n\u003cli\u003eCustomizable on-screen panel, knob styles, theme colors and adjustable ambient lights; a detachable PU leather strap is included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" 800x480\u003c\/strong\u003e color touchscreen – browse and edit tones, amps, cabs, effects and drum patterns.\u003c\/li\u003e\n\u003cli\u003eCompanion app over Bluetooth – tone editing and tone sharing through the Hotone community.\u003c\/li\u003e\n\u003cli\u003eSonglist mode – arrange tones for a set and switch between them quickly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e – one 1\/4\" TS instrument jack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAux In\u003c\/strong\u003e – 1\/8\" stereo, recordable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhones\u003c\/strong\u003e – 1\/8\" stereo headphone output for silent practice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e – USB 2.0 Type-C, USB Audio 2.0 (\u003cstrong\u003e2-in\/2-out\u003c\/strong\u003e, loopback, reamp) and firmware updates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth\u003c\/strong\u003e – 5.0 dual-mode: audio streaming, app control and Bluetooth MIDI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e – \u003cstrong\u003e18V DC\u003c\/strong\u003e center-positive, \u003cstrong\u003e2 A\u003c\/strong\u003e, with the included adapter. This is the opposite polarity of the 9V center-negative standard used across Hotone's pedal range, so do not substitute a pedal power supply.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePulze amplifier (AP-30BK, Eclipse)\u003c\/li\u003e\n\u003cli\u003e18V DC power adapter\u003c\/li\u003e\n\u003cli\u003eDetachable PU leather strap\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePulze (AP-30BK, Eclipse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBluetooth stereo modeling amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput power\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e30 W\u003c\/strong\u003e Class D stereo (\u003cstrong\u003e15 W + 15 W\u003c\/strong\u003e, 1% THD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeakers\u003c\/th\u003e\n\u003ctd\u003eTwo \u003cstrong\u003e3.5\"\u003c\/strong\u003e custom full-range speakers, ABS cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003e20 Hz – 20 kHz\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProcessing\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\u003c\/strong\u003e \/ \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e, dual-core DSP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModels\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e46\u003c\/strong\u003e amps, \u003cstrong\u003e48\u003c\/strong\u003e cabs (incl. \u003cstrong\u003e5\u003c\/strong\u003e Celestion IRs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects \/ modules \/ tones\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e177\u003c\/strong\u003e (incl. global EQ) \/ \u003cstrong\u003e7\u003c\/strong\u003e \/ up to \u003cstrong\u003e200\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUser IRs\u003c\/th\u003e\n\u003ctd\u003eUp to \u003cstrong\u003e20\u003c\/strong\u003e, \u003cstrong\u003e24-bit\/44.1 kHz\u003c\/strong\u003e mono WAV, \u003cstrong\u003e1024\u003c\/strong\u003e points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrum machine\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e100\u003c\/strong\u003e rhythm patterns + metronome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScreen\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4\"\u003c\/strong\u003e \u003cstrong\u003e800 x 480\u003c\/strong\u003e color touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e1\/4\" TS input; 1\/8\" Aux In; 1\/8\" headphones; USB 2.0 Type-C (USB Audio 2.0, 2-in\/2-out, loopback + reamp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWireless\u003c\/th\u003e\n\u003ctd\u003eBluetooth 5.0 dual-mode (audio + control, Bluetooth MIDI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e18V DC\u003c\/strong\u003e center-positive, \u003cstrong\u003e2 A\u003c\/strong\u003e (adapter included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e17.9 x 6.3 x 6.7 in\u003c\/strong\u003e (\u003cstrong\u003e455 x 161 x 171 mm\u003c\/strong\u003e, W x D x H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8.4 lb\u003c\/strong\u003e (\u003cstrong\u003e3.8 kg\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eEclipse (black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does this amp need?\u003c\/strong\u003e \u003cstrong\u003e18V DC\u003c\/strong\u003e, center-positive, \u003cstrong\u003e2 A\u003c\/strong\u003e. The adapter is included. This is the opposite polarity of the 9V center-negative standard on most Hotone pedals, so do not reuse a pedal power adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between AP-30WH and AP-30BK?\u003c\/strong\u003e Only the finish. Both are the same Pulze amplifier with identical specifications; AP-30WH is Luna (white) and AP-30BK is Eclipse (black).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I control it wirelessly?\u003c\/strong\u003e Yes. Bluetooth 5.0 dual-mode (BLE + audio) connects the companion app for editing and streams audio; Bluetooth MIDI control works with third-party bridging software.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I record directly from the amp into my computer?\u003c\/strong\u003e Yes, the USB-C port provides a full USB Audio 2.0 interface with \u003cstrong\u003e2-in\/2-out\u003c\/strong\u003e, loopback and reamp support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I load my own cabinet IRs?\u003c\/strong\u003e Yes, up to \u003cstrong\u003e20\u003c\/strong\u003e user IRs (24-bit\/44.1 kHz mono WAV, 1024 points) alongside \u003cstrong\u003e48\u003c\/strong\u003e cab models and \u003cstrong\u003e5\u003c\/strong\u003e Celestion speaker IRs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I play along with backing tracks?\u003c\/strong\u003e Yes, over Bluetooth audio or through the 1\/8\" Aux In, which is also recordable; the built-in drum machine has \u003cstrong\u003e100\u003c\/strong\u003e patterns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a matching carrying case?\u003c\/strong\u003e Yes, the Hotone PGB-1 Pulze Gig Bag is designed for this amp, with a 600D waterproof shell and EPE foam padding. It is sold separately.\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"Default Title","offer_id":44336921870589,"sku":"888506110023","price":549.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/hotone-pulze-ap-30bk-front-angled.jpg?v=1785939822"},{"product_id":"hotone-ampero-ii-stage-mp-380-amp-modeler","title":"Hotone Ampero II Stage MP-380 Amp Modeler \u0026 Multi-Effects, 8 Footswitches, XLR, Bluetooth","description":"\u003cp\u003e\u003cstrong\u003eThe Hotone Ampero II Stage MP-380 is Hotone's flagship floorboard processor, and as of firmware V1.7.0 it is the first Hotone device that natively loads NAM A2 amp captures right on the unit.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEight footswitches, up to five scenes per patch, a 5\" touchscreen with three quick-access knobs, full XLR I\/O with a mic preamp, Bluetooth audio and control, and an 8-in\/8-out USB audio interface make it a complete rig for stage, studio and practice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Ampero II Stage\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNative NAM A2 support on the device itself: firmware V1.7.0 (July 2026) added a NAM effect module that loads NAM A2 files natively in Lite format – the first Hotone product to get this. NAM is processor-intensive, so it works best as the first module in a new patch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e460+\u003c\/strong\u003e effects across \u003cstrong\u003e16\u003c\/strong\u003e effect modules with \u003cstrong\u003e12\u003c\/strong\u003e simultaneous slots and \u003cstrong\u003e300\u003c\/strong\u003e patches give you room to build full-song presets without running out of routing options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8\u003c\/strong\u003e footswitches with multicolor halo LEDs (six programmable plus a Mode switch for Patch\/Stomp modes) and up to \u003cstrong\u003e5\u003c\/strong\u003e scenes per patch.\u003c\/li\u003e\n\u003cli\u003eFull XLR I\/O: two balanced XLR outputs with ground lift plus an XLR\/TS combo mic input with a \u003cstrong\u003e52 dB\u003c\/strong\u003e preamp and \u003cstrong\u003e48V\u003c\/strong\u003e phantom power, so you can run vocals or an acoustic mic through the same unit.\u003c\/li\u003e\n\u003cli\u003eTwo EXP\/CTRL jacks made for Ampero II Press, for expression and momentary footswitch control.\u003c\/li\u003e\n\u003cli\u003eBluetooth \u003cstrong\u003e4.2\u003c\/strong\u003e dual-mode: stream audio from your phone, edit from the iOS\/Android app, or use Bluetooth MIDI – including wireless pairing with Ampero Control, no MIDI cable required.\u003c\/li\u003e\n\u003cli\u003eSound Clone captures the tone of amps, cabinets, dirt pedals and boosters into the CLONE module.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls and switches\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\"\u003c\/strong\u003e 800 x 480 touchscreen – full patch\/effect editing on the unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8\u003c\/strong\u003e footswitches – patch and scene change, effect on\/off, tap tempo; the Mode footswitch toggles Patch\/Stomp modes and bypasses the unit when held.\u003c\/li\u003e\n\u003cli\u003eVOLUME knob, MENU\/VALUE knob and \u003cstrong\u003e3\u003c\/strong\u003e quick-access knobs.\u003c\/li\u003e\n\u003cli\u003ePower switch and input-mode selectors – INPUT L (3 modes), XLR\/TS combo Input R (5 modes; Line or Mic with an XLR cable).\u003c\/li\u003e\n\u003cli\u003eMic preamp – up to \u003cstrong\u003e52 dB\u003c\/strong\u003e gain with switchable \u003cstrong\u003e48V\u003c\/strong\u003e phantom power for Input R.\u003c\/li\u003e\n\u003cli\u003eGround-lift switch – on the XLR outputs, to eliminate hum from ground loops.\u003c\/li\u003e\n\u003cli\u003eAmbient multicolor LED strip.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Power\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput L\u003c\/strong\u003e – 1\/4\" TS, E.GT \u003cstrong\u003e1 MΩ\u003c\/strong\u003e \/ A.GT \u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e \/ LINE \u003cstrong\u003e10 kΩ\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput R\u003c\/strong\u003e – XLR\/TS combo with mic preamp; XLR \u003cstrong\u003e5 kΩ\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e – 2 x 1\/4\" TRS unbalanced, 2 x XLR balanced with ground lift (\u003cstrong\u003e1 kΩ\u003c\/strong\u003e), 1\/8\" headphones (\u003cstrong\u003e47 Ω\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX loop\u003c\/strong\u003e – stereo send and return on 1\/4\" TRS jacks (return \u003cstrong\u003e100 kΩ\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEXP\/CTRL 1\/2\u003c\/strong\u003e – 2 x 1\/4\" TRS for expression pedals or momentary footswitches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMIDI\u003c\/strong\u003e – 1\/8\" TRS MIDI IN and MIDI OUT\/THRU; standard 5-pin MIDI gear connects through a TRS-to-5-pin converter cable. Bluetooth MIDI is also supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAux In\u003c\/strong\u003e – 1\/8\" stereo (\u003cstrong\u003e10 kΩ\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e – USB 2.0 Type-C, USB Audio 2.0, \u003cstrong\u003e8\u003c\/strong\u003e in \/ \u003cstrong\u003e8\u003c\/strong\u003e out, \u003cstrong\u003e44.1-192 kHz\u003c\/strong\u003e, reamp support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e – \u003cstrong\u003e9-18V DC\u003c\/strong\u003e center-negative, up to \u003cstrong\u003e1.4 A\u003c\/strong\u003e at 9V. Use the included power adapter. No battery operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAmpero II Stage processor\u003c\/li\u003e\n\u003cli\u003ePower adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAmpero II Stage (MP-380)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eAmp modeler \/ multi-effects floor processor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScreen\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e5\"\u003c\/strong\u003e \u003cstrong\u003e800 x 480\u003c\/strong\u003e color touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffects \/ modules \/ slots \/ patches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e460+\u003c\/strong\u003e (incl. global EQ) \/ \u003cstrong\u003e16\u003c\/strong\u003e \/ \u003cstrong\u003e12\u003c\/strong\u003e \/ \u003cstrong\u003e300\u003c\/strong\u003e (60 banks x 5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScenes\u003c\/th\u003e\n\u003ctd\u003eUp to \u003cstrong\u003e5\u003c\/strong\u003e per patch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitches\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8\u003c\/strong\u003e, multicolor halo LEDs; no built-in expression pedal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProcessing\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e24-bit\u003c\/strong\u003e \/ \u003cstrong\u003e44.1 kHz\u003c\/strong\u003e, \u003cstrong\u003e127 dB\u003c\/strong\u003e max dynamic range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModels\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e68\u003c\/strong\u003e cab models; \u003cstrong\u003e20\u003c\/strong\u003e Celestion IRs; \u003cstrong\u003e50\u003c\/strong\u003e user IR slots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLooper \/ drum machine\u003c\/th\u003e\n\u003ctd\u003eStereo \u003cstrong\u003e60 s\u003c\/strong\u003e \/ \u003cstrong\u003e100\u003c\/strong\u003e rhythm styles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNAM\u003c\/th\u003e\n\u003ctd\u003eNAM module for NAM A2 files (Lite format) from firmware V1.7.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMic input\u003c\/th\u003e\n\u003ctd\u003eXLR\/TS combo, \u003cstrong\u003e52 dB\u003c\/strong\u003e preamp, \u003cstrong\u003e48V\u003c\/strong\u003e phantom power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003e2 x 1\/4\" TRS unbalanced; 2 x XLR balanced with ground lift; stereo FX send; 1\/8\" headphones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpression\u003c\/th\u003e\n\u003ctd\u003e2 x 1\/4\" TRS EXP\/CTRL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMIDI\u003c\/th\u003e\n\u003ctd\u003e1\/8\" TRS MIDI IN + MIDI OUT\/THRU; Bluetooth MIDI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBluetooth\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4.2\u003c\/strong\u003e dual-mode (audio and control)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB\u003c\/th\u003e\n\u003ctd\u003eUSB 2.0 Type-C, 8 in \/ 8 out, \u003cstrong\u003e44.1-192 kHz\u003c\/strong\u003e, reamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003eE.GT \u003cstrong\u003e1 MΩ\u003c\/strong\u003e \/ A.GT \u003cstrong\u003e4.7 MΩ\u003c\/strong\u003e \/ LINE \u003cstrong\u003e10 kΩ\u003c\/strong\u003e; XLR \u003cstrong\u003e5 kΩ\u003c\/strong\u003e; FX return \u003cstrong\u003e100 kΩ\u003c\/strong\u003e; Aux \u003cstrong\u003e10 kΩ\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput impedance\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1 kΩ\u003c\/strong\u003e (unbalanced, balanced, FX send); headphones \u003cstrong\u003e47 Ω\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9-18V DC\u003c\/strong\u003e center-negative\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent draw\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1.4 A\u003c\/strong\u003e max at 9V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e11.9 x 7.1 x 2.3 in\u003c\/strong\u003e (\u003cstrong\u003e301 x 180 x 58 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4.2 lb\u003c\/strong\u003e (\u003cstrong\u003e1895 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Ampero II Stage really load NAM A2 files on the device itself?\u003c\/strong\u003e Yes. Firmware V1.7.0 added a NAM effect module that natively loads NAM A2 files in Lite format directly on the unit – the first Hotone product to get on-device NAM A2 support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat software do I need to update to get NAM A2?\u003c\/strong\u003e Use Ampero II software V1.4.0 or later for the firmware update; Ampero II Setup V1.5.1 matches firmware V1.7.0 and adds NAM A2 support in the CLONE module, and Ampero II Stage Mobile V1.2.2 adds it in the app.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between Ampero II Stage and Ampero II Stomp?\u003c\/strong\u003e Stage has a larger 5\" screen, eight footswitches instead of three, XLR I\/O with a mic preamp and phantom power, two EXP\/CTRL jacks, Bluetooth and the onboard NAM module, at \u003cstrong\u003e1895 g\u003c\/strong\u003e. Stomp is the smaller, lighter (\u003cstrong\u003e1050 g\u003c\/strong\u003e) board-mount unit with 5-pin MIDI and TRS balanced outputs instead of XLR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Ampero II Stage have a built-in expression pedal?\u003c\/strong\u003e No. Use the two EXP\/CTRL jacks with an external expression pedal such as Ampero II Press, which is made for this unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I control Ampero II Stage wirelessly?\u003c\/strong\u003e Yes. It supports Bluetooth 4.2 dual-mode with Bluetooth MIDI, and pairs with Ampero Control by holding footswitches 2+3 on the controller and selecting it in Stage's Search Device menu.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e \u003cstrong\u003e9-18V DC\u003c\/strong\u003e center-negative, drawing up to \u003cstrong\u003e1.4 A\u003c\/strong\u003e at 9V. A power adapter is included, and using it is recommended.\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"Default Title","offer_id":44337024827645,"sku":"888506050145","price":949.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/hotone-ampero-ii-stomp-front.jpg?v=1785939797"},{"product_id":"hotone-ampero-ii-press-sp-35-expression-pedal","title":"Hotone Ampero II Press SP-35 Passive Expression Pedal with Built-In Momentary Footswitch","description":"\u003cp\u003e\u003cstrong\u003eThe Hotone Ampero II Press SP-35 gives Ampero II Stage owners an expression pedal and a momentary footswitch in one passive unit, wired to fill Stage's two EXP\/CTRL jacks.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAmpero II Press combines expression and switching in one control pedal: both work at the same time and can be sent to different destinations. A metal \"click\" footswitch gives clear tactile feedback, and a high-quality potentiometer gives precise response and long life. It has no audio path – it is a controller for multi-effects, not a volume pedal – and it also works with other effects units that have dual EXP\/footswitch inputs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy guitarists choose the Ampero II Press\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade for Ampero II Stage: Stage's EXP\/CTRL 1\/2 jacks are described as perfect for Ampero II Press, and its connection diagram uses two TRS cables to EXP\/CTRL 1 and 2.\u003c\/li\u003e\n\u003cli\u003eTwo independent control paths in one footprint: a \u003cstrong\u003e10 kΩ\u003c\/strong\u003e linear expression output plus a separate momentary FOOTSWITCH output, so you get sweep control and a switch from a single pedal.\u003c\/li\u003e\n\u003cli\u003eFully passive: no battery, no DC jack, nothing to keep charged before a show.\u003c\/li\u003e\n\u003cli\u003eSolid aluminum alloy casing in the same \u003cstrong\u003e162 x 81 mm\u003c\/strong\u003e footprint as the rest of the Press family, so it sits naturally next to your other Hotone Press pedals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTreadle – sweeps the \u003cstrong\u003e10 kΩ\u003c\/strong\u003e linear expression pot.\u003c\/li\u003e\n\u003cli\u003eMomentary click footswitch – wired to its own FOOTSWITCH jack, separate from the expression jack, so it can trigger a different function on your host device.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections \u0026amp; Setup\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEXP – 1\/4\" (6.35 mm) TRS, \u003cstrong\u003e10 kΩ\u003c\/strong\u003e, linear.\u003c\/li\u003e\n\u003cli\u003eFOOTSWITCH – 1\/4\" (6.35 mm) TRS, momentary.\u003c\/li\u003e\n\u003cli\u003eAmpero II Stage – one 1\/4\" TRS cable from EXP and one from FOOTSWITCH to EXP\/CTRL 1 and 2.\u003c\/li\u003e\n\u003cli\u003ePower – none required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAmpero II Press (SP-35)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePassive expression pedal with momentary footswitch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpression\u003c\/th\u003e\n\u003ctd\u003e1\/4\" TRS, \u003cstrong\u003e10 kΩ\u003c\/strong\u003e, linear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootswitch\u003c\/th\u003e\n\u003ctd\u003e1\/4\" TRS, momentary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAudio path\u003c\/th\u003e\n\u003ctd\u003eNone (control pedal only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eNone – fully passive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e6.4 x 3.2 x 2.0 in\u003c\/strong\u003e (\u003cstrong\u003e162 x 81 x 51 mm\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e16.0 oz\u003c\/strong\u003e (\u003cstrong\u003e455 g\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pedal only work with Ampero II Stage?\u003c\/strong\u003e No. It is made to pair with Ampero II Stage, whose EXP\/CTRL jacks are described as perfect for it, but it works with any effects unit that has TRS expression and momentary footswitch inputs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it as a volume pedal?\u003c\/strong\u003e No. Ampero II Press has no audio input or output; it sends only expression and footswitch control signals. Volume is controlled through the expression input of your multi-effects unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this and Ampero Press (SP-30)?\u003c\/strong\u003e Ampero Press is a passive volume\/expression pedal with an audio INPUT\/OUTPUT and EXP OUT but no footswitch. Ampero II Press drops the audio path and adds a built-in momentary footswitch with its own output, filling two control jacks on a host such as Ampero II Stage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pedal powered?\u003c\/strong\u003e No, it is fully passive and needs no power supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the footswitch and expression pedal independently?\u003c\/strong\u003e Yes, they are wired to two separate 1\/4\" TRS jacks (EXP and FOOTSWITCH), work at the same time, and can each control a different function on your host device.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need two cables to use both functions?\u003c\/strong\u003e Yes, one 1\/4\" TRS cable per jack – two TRS cables from Ampero II Press to Stage's EXP\/CTRL 1 and 2.\u003c\/p\u003e","brand":"Hotone","offers":[{"title":"Default Title","offer_id":44337072636157,"sku":"888506040108","price":119.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/products\/hotone-ampero-ii-press-sp-35-angled.jpg?v=1785939797"},{"product_id":"vega-trem-vt1-ultra-trem-6-screw-right-handed-strat-tremolo-bridge-glossy","title":"Vega-Trem VT1 Ultra Trem 6-Screw Strat Tremolo Bridge, Right-Handed, Glossy, No Routing","description":"\u003cp\u003e\u003cstrong\u003eThe Vega-Trem VT1 Ultra Trem 6-Screw Right-Handed bridge in glossy finish is the exact-fit upgrade for right-handed Strat-style guitars using a 6-Screw vibrato mounting.\u003c\/strong\u003e It gives you stainless-steel construction and a stainless-steel block for clarity and versatility, a smooth 2-way vibrato with a reliable return to pitch, and a drop-in installation that uses the original 6-Screw cavity without drilling or routing.\u003c\/p\u003e\n\u003ch3\u003ePedalzoo Fit Check Before You Order\u003c\/h3\u003e\n\u003cp\u003eThis listing is the 6-Screw Right-Handed version, built for Strat-style guitars that use a 6-Screw vibrato mounting system. Before you buy, confirm three things: your exact guitar model, whether your bridge is 6-Screw or 2-Point mounted (this is about the bridge mounting hardware, not the shape of the body), and that you need a right-handed bridge to match your existing setup. The package includes the mounting hardware for a 6-Screw route and post pattern, so it drops into the original cavity on a compatible guitar.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm your exact guitar model and bridge mounting in the \u003ca href=\"\/en-int\/pages\/vega-trem-compatibility-finder\"\u003ePedalzoo Vega-Trem Compatibility Finder\u003c\/a\u003e before ordering.\u003c\/li\u003e\n\u003cli\u003eThis is the 6-Screw Right-Handed listing; it is not intended for 2-Point guitars or for left-handed instruments.\u003c\/li\u003e\n\u003cli\u003eIncluded hardware matches the 6-Screw route and post pattern for a no-mod, drop-in fit on compatible guitars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy guitarists choose the VT1 Ultra Trem 6-Screw Right-Handed, Glossy\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStainless-steel construction and a stainless-steel block give this bridge a clear, versatile voice that stays consistent across playing styles.\u003c\/li\u003e\n\u003cli\u003eBecause this is the exact 6-Screw right-handed variant, it fits directly into the original tremolo cavity with the correct post\/route pattern, so you avoid the wrong-version return risk that comes with generic listings.\u003c\/li\u003e\n\u003cli\u003eVT1 Ultra Trem is the clarity- and versatility-focused VT1 line, sharing the same saddles, pivot system, and manufacturing quality as VT1 Special, aimed at players who want a more neutral tonal starting point.\u003c\/li\u003e\n\u003cli\u003eSmooth 2-way vibrato travel and a solid return to pitch mean you can use the arm expressively without fighting the setup afterward.\u003c\/li\u003e\n\u003cli\u003eAt-home installation with common hand tools is realistic here: the included hardware and Allen keys are sized for this exact mounting system, so you are not stuck waiting on a shop appointment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVT1 Special or VT1 Ultra Trem: which should you choose?\u003c\/h3\u003e\n\u003cp\u003eBoth VT1 Special and VT1 Ultra Trem share the same saddles, pivot system, and manufacturing quality, so neither line is universally better; the right choice depends on the block material and tone you want.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose VT1 Ultra Trem\u003c\/strong\u003e if you want stainless-steel construction and a stainless-steel block for clarity and versatility across playing styles. \u003ca href=\"\/en-int\/collections\/vt1-ultra-trem\"\u003eBrowse the VT1 Ultra Trem collection\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose VT1 Special\u003c\/strong\u003e if you want a more accessible, value-focused bridge with a brass block that adds extra punch and response for rock and high-gain playing. \u003ca href=\"\/en-int\/collections\/vt1-special\"\u003eBrowse the VT1 Special collection\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVega-Trem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel line\u003c\/td\u003e\n\u003ctd\u003eVT1 Ultra-Trem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eTremolo Bridge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting system\u003c\/td\u003e\n\u003ctd\u003e6-Screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge system\u003c\/td\u003e\n\u003ctd\u003eTremolo (synchronized)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibrato movement\u003c\/td\u003e\n\u003ctd\u003e2-way, pitch up and down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandedness\u003c\/td\u003e\n\u003ctd\u003eRight-Handed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGlossy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless steel construction with a stainless steel block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for \/ Instrument fit\u003c\/td\u003e\n\u003ctd\u003eRight-handed Strat-style \/ S-style electric guitars with traditional 6-Screw tremolo mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU \/ GTIN (EAN)\u003c\/td\u003e\n\u003ctd\u003e8437022510002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eVT1STD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASIN\u003c\/td\u003e\n\u003ctd\u003eB0BK9T26VF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHarmonized System Code\u003c\/td\u003e\n\u003ctd\u003e92099410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eDrop-in installation; no drilling or routing on a compatible guitar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct dimensions\u003c\/td\u003e\n\u003ctd\u003e7.60 × 3.40 × 1.70 cm, bridge without arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBox dimensions\u003c\/td\u003e\n\u003ctd\u003e18.50 × 7.50 × 5.50 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.10 lb (500 g), packed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-year manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my guitar?\u003c\/strong\u003e This listing is the 6-Screw Right-Handed Glossy bridge for Strat-style guitars using a 6-Screw vibrato mounting system. Confirm your exact guitar model, mounting system, and handedness in the \u003ca href=\"\/en-int\/pages\/vega-trem-compatibility-finder\"\u003ePedalzoo Vega-Trem Compatibility Finder\u003c\/a\u003e before you order to make sure the route\/post pattern and included hardware match your instrument.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow can I tell whether my guitar needs 6-Screw or 2-Point?\u003c\/strong\u003e The difference is the bridge mounting system, not the body shape: a traditional 6-Screw bridge pivots on six screws along its front edge, while a 2-Point bridge pivots on two larger posts. Both mounting systems appear on Strat-style guitars, so check the bridge itself rather than the guitar model or body outline. This listing is the 6-Screw version. If you are unsure, use the \u003ca href=\"\/en-int\/pages\/vega-trem-compatibility-finder\"\u003ePedalzoo Vega-Trem Compatibility Finder\u003c\/a\u003e to identify the correct mounting for your exact guitar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a locking nut or locking tuners?\u003c\/strong\u003e No. Neither a locking nut nor locking tuners is required to install or use this bridge. Correct stringing, a nut in good condition, balanced springs, and a proper setup still matter for tuning stability, but locking tuners are not a substitute for that setup and are not needed for this bridge to work as intended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes installation require drilling or routing?\u003c\/strong\u003e No. This 6-Screw Right-Handed bridge is designed as a drop-in replacement for the original 6-Screw tremolo cavity on compatible guitars, using the existing mounting holes and post\/route pattern. No drilling, routing, or other permanent body modification is required for this exact mounting system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I get installation help?\u003c\/strong\u003e Installing this bridge at home is straightforward with the included hardware and common hand tools such as a Phillips screwdriver and the supplied Allen keys. For step-by-step guidance, use the \u003ca href=\"\/en-int\/collections\/vega-trem-how-to-install\"\u003ePedalzoo Vega-Trem installation guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Vega-Trem","offers":[{"title":"Default Title","offer_id":44340567277821,"sku":"8437022510002","price":379.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/7100\/7485\/files\/vega-trem-vt1-ultra-trem-6-screw-right-handed-glossy-front-angled-bridge-with-arm.jpg?v=1784335706"}],"url":"https:\/\/pedalzoo.com\/en-int\/collections\/new-arrivals.oembed?page=6","provider":"Pedalzoo","version":"1.0","type":"link"}