Hotone Ampero II Stage amp modeler shown together with the Ampero II Press expression pedal bundle
Overhead flat-lay of Hotone Ampero II Press pedal wired into a full pedalboard signal chain
Hotone Ampero II Stomp amp modeler, front view of touchscreen and five-footswitch row
Hotone Ampero II Stage amp modeler, angled view of touchscreen and footswitch row
Hotone Ampero II Stage amp modeler, angled view showing rear XLR and USB connectors
Hotone Ampero II Stage amp modeler, close-up of rear XLR, MIDI and power connector panel
Hotone Ampero II series amp modeler, side profile showing knobs and jack panel
Hand tapping the touchscreen of the Hotone Ampero II Stage amp modeler
Feet beside a white Hotone Ampero II Press expression pedal with cables connected on the floor
Musician recording electric guitar through an audio interface and laptop in a home studio
Hotone Ampero II Stage amp modeler on a desk with guitar, phone and laptop in a home studio setup
Overhead view of Hotone Ampero II Press pedal connected to a controller via TRS cable
Sneaker-clad foot operating the Hotone Ampero II Press SP-35 pedal with connected cable
Foot resting on the Hotone Ampero II Press SP-35 rocker pedal top
Close-up of Hotone Ampero II Press SP-35 textured rocker top with geometric pattern
Two Hotone Ampero II Press expression pedals side by side showing low profile and jacks
Hotone Ampero II Press SP-35 expression pedal, rear view showing Hotone logo and jacks
Hotone Ampero II Press SP-35 expression pedal, front view of base with logo and output jacks
Hotone Ampero II Press SP-35 expression pedal, angled view showing rocker top and base
Hotone Ampero II Stage amp modeler shown together with the Ampero II Press expression pedal bundleOverhead flat-lay of Hotone Ampero II Press pedal wired into a full pedalboard signal chainHotone Ampero II Stomp amp modeler, front view of touchscreen and five-footswitch rowHotone Ampero II Stage amp modeler, angled view of touchscreen and footswitch rowHotone Ampero II Stage amp modeler, angled view showing rear XLR and USB connectorsHotone Ampero II Stage amp modeler, close-up of rear XLR, MIDI and power connector panelHotone Ampero II series amp modeler, side profile showing knobs and jack panelHand tapping the touchscreen of the Hotone Ampero II Stage amp modelerFeet beside a white Hotone Ampero II Press expression pedal with cables connected on the floorMusician recording electric guitar through an audio interface and laptop in a home studioHotone Ampero II Stage amp modeler on a desk with guitar, phone and laptop in a home studio setupOverhead view of Hotone Ampero II Press pedal connected to a controller via TRS cableSneaker-clad foot operating the Hotone Ampero II Press SP-35 pedal with connected cableFoot resting on the Hotone Ampero II Press SP-35 rocker pedal topClose-up of Hotone Ampero II Press SP-35 textured rocker top with geometric patternTwo Hotone Ampero II Press expression pedals side by side showing low profile and jacksHotone Ampero II Press SP-35 expression pedal, rear view showing Hotone logo and jacksHotone Ampero II Press SP-35 expression pedal, front view of base with logo and output jacksHotone Ampero II Press SP-35 expression pedal, angled view showing rocker top and base

Hotone Ampero II Stage MP-380 + Ampero II Press SP-35 Bundle

Hotone
No reviews
Price:
€600,95 EUR
Stock:
In stock, ready to be shipped
Customers rate us 4.9/5 based on 3163 reviews.

About This Item

This bundle pairs the Hotone Ampero II Stage floorboard processor with the Ampero II Press expression and footswitch pedal that Hotone's own manual names as the exact match for Stage's EXP/CTRL jacks.

Bundle contents: 1x Ampero II Stage (MP-380) amp modeler/effects processor, 1x Ampero II Press (SP-35) passive switching/expression pedal. Ampero II Stage: 9-18V DC, 1.4A max, NAM A2 supported from firmware V1.7.0. Ampero II Press: fully passive, no power required. Manufacturer: Hotone.

Description

This bundle pairs the Hotone Ampero II Stage with the Ampero II Press expression/footswitch pedal that Hotone's own manual names as the exact match for Stage's two EXP/CTRL jacks.

Why this bundle makes sense

  • Officially sound pairing, not a guess: Ampero II Stage's manual documents its EXP/CTRL 1/2 jacks as "Perfect for Ampero II Press", and the Ampero II Press manual's own wiring diagram shows both of its jacks feeding Stage's EXP/CTRL 1 and 2 with two 1/4" TRS cables.
  • Ampero II Stage brings the 460+ effect engine, 5" touchscreen, XLR I/O with 48V phantom power, and (on firmware V1.7.0) native on-device NAM A2 loading.
  • Ampero II Press adds independent expression and momentary-footswitch control in one passive pedal, with no extra power supply required.
  • Buying them together fills both of Stage's EXP/CTRL jacks in one purchase instead of sourcing the expression pedal separately.
  • Each component is also sold on its own if you already own one half of this pairing.

What's included

Ampero II Stage (MP-380)

Floorboard amp modeler / effects processor. 460+ effects, 16 modules, 12 slots, 300 patches. 5" touchscreen. XLR I/O with 52dB mic preamp and 48V phantom power. 9-18V DC, 1.4A max. 30.1 x 18.0 x 5.8 cm, 1895 g. NAM A2 supported on-device from firmware V1.7.0 (2026-07-22), requiring Ampero II software V1.4.0+.

Ampero II Press (SP-35)

Passive switching/expression pedal. 10 kΩ linear EXP jack plus an independent momentary FOOTSWITCH jack. No power required. 16.2 x 8.1 x 5.1 cm, 455 g.

Technical specifications

Bundle composition 1x Ampero II Stage (MP-380) + 1x Ampero II Press (SP-35)
Combined weight (derived, not an official Hotone figure) 2350 g (1895 g + 455 g)
Official pairing evidence Ampero II Stage manual: EXP/CTRL 'Perfect for Ampero II Press'; Ampero II Press manual's connection diagram wires both jacks to Stage's EXP/CTRL 1 and 2
NAM A2 Supported on the Ampero II Stage component from firmware V1.7.0 (2026-07-22); the Ampero II Press component is a passive control pedal with no NAM relevance

FAQ

Why are these two products bundled together? Hotone's own Ampero II Stage manual documents its EXP/CTRL 1 and 2 jacks as "Perfect for Ampero II Press", and the Ampero II Press manual's wiring diagram shows exactly this connection – it is an officially supported pairing, not just a retailer guess.

Does the bundle include a discount or extra accessories beyond the two units? This bundle is a composition of the two individually specified products; check the current bundle price on this page for any savings versus buying each item separately.

Does the Ampero II Stage in this bundle support NAM A2? Yes, from firmware V1.7.0 (released 2026-07-22), requiring an update to Ampero II software V1.4.0 or later. The Ampero II Press component has no firmware or NAM relevance.

Do I need extra cables to connect the two? Two 1/4" TRS cables are needed to wire Ampero II Press's EXP and FOOTSWITCH jacks into Stage's EXP/CTRL 1 and 2, per Hotone's official connection diagram.

Can I buy either piece separately later if I already own one? Yes, both Ampero II Stage and Ampero II Press are sold as separate models on our site.

What is the combined weight of this bundle? Approximately 2350 g, calculated by adding the two components' individually published weights (1895 g + 455 g); Hotone does not publish an official bundle weight.

You May Also Like

Recently viewed