About This Item
Description
The Hotone Ampero MP-100 is the original full-size Ampero floor processor: more than 240 amp, cab and effect models, XLR balanced outs, a built-in expression pedal and 5-pin MIDI In, running on an 18V supply instead of the 9V used by Ampero Mini.
Comparing models? See our guide: Which Hotone Ampero Should You Buy? Ampero II Stage vs Ampero II vs Stomp vs Mini
Ampero is built around Hotone's CDCM HD and F.I.R.E. modeling: 64 amp models, 60 cab models, more than 100 pedal models and over 50 Hotone original effects, with up to 9 effect modules running at once. Patches are edited on a 4" color touchscreen or in the free Ampero Editor for Mac and PC, and the unit doubles as a USB audio interface for recording.
Why guitarists choose the Ampero
- Large effect library: more than 240 effects across 9 simultaneous modules and 198 patches (99 user + 99 factory).
- Full XLR balanced outputs with ground-lift switching, alongside 2 x 1/4" TS unbalanced outs, for the cleanest connection to a mixing board or interface.
- Standard 5-pin MIDI In, so it can be switched from a MIDI controller such as Ampero Control (EC-4) by connecting the controller's MIDI OUT/THRU to Ampero's MIDI IN.
- Built-in expression pedal plus an EXP 2/FS jack for an external expression pedal or the Ampero Switch dual footswitch.
- User IR loader with third-party IR support (20 user IR slots), plus microphone type and position simulation.
- Built-in looper (up to 100 seconds mono or 50 seconds stereo, pre- or post-effects, with reverse and half-speed) and a drum machine with 100 rhythm patterns.
- Sound Clone support in current firmware: import up to 10 clone files and use one at a time in place of the amp or drive module, managed through Ampero Editor. NAM A1 and A2 files are not loaded natively, but they can be converted with Ampero Editor V1.6.0 or later (firmware V5.2 or later).
Controls
- 4" 800 x 480 color touchscreen – full patch and effect editing, with three rotary knobs for on-screen parameters.
- Volume knob and Menu/Value knob – quick level and menu control.
- 4 assignable footswitches with halo LEDs, and a built-in expression pedal (EXP 1).
- 3-way input mode selector – electric guitar, acoustic guitar or line level.
- GND LIFT switch – on the balanced XLR outputs.
Connections & Power
- Input – 1/4" TS instrument jack with three-way input mode (E.GT 1 MΩ, A.GT 4.7 MΩ, LINE 10 kΩ).
- Aux In – 1/8" stereo jack (10 kΩ) for backing tracks.
- Outputs – 2 x 1/4" TS unbalanced (3.2 kΩ), 2 x XLR balanced with ground lift (2 kΩ), 1/8" stereo headphones (66 Ω).
- EXP 2/FS – 1/4" TRS jack for an expression pedal or a dual footswitch.
- MIDI In – standard 5-pin DIN.
- USB – USB 2.0 Type-B, USB Audio 2.0 interface, editing and firmware updates; class compliant on macOS and Windows 10.
- Power – 18V DC center-negative, 500 mA max, 5.5 x 2.1 mm barrel. This is 18V, not the 9V used by Ampero Mini, so a 9V pedal supply will not run it. No battery operation.
In the Box
- Ampero processor
- 18V DC power adapter
| Model | Ampero (MP-100) |
|---|---|
| Type | Amp modeler & multi-effects floor processor with built-in expression pedal |
| Effects | 240+ (64 amps, 60 cabs, 100+ pedal models, 50+ Hotone originals) |
| Modules / patches | 9 simultaneous / 198 (99 user + 99 factory) |
| Screen | 4" 800 x 480 color touchscreen |
| Footswitches | 4 assignable, halo LEDs; built-in expression pedal |
| Processing | 24-bit / 44.1 kHz, 120 dB S/N |
| IR support | 24-bit/44.1 kHz mono WAV, 1024 points; 20 user slots |
| Looper | 100 s mono / 50 s stereo |
| Drum machine | 100 rhythm patterns |
| Outputs | 2 x 1/4" TS unbalanced; 2 x XLR balanced with ground lift; 1/8" headphones |
| Inputs | 1/4" TS instrument (3 modes); 1/8" Aux In; 1/4" TRS EXP 2/FS |
| MIDI | 5-pin MIDI In |
| USB | USB 2.0 Type-B, USB Audio 2.0 |
| Input impedance | E.GT 1 MΩ / A.GT 4.7 MΩ / LINE 10 kΩ; Aux 10 kΩ |
| Output impedance | Unbalanced 3.2 kΩ; balanced 2 kΩ; headphones 66 Ω |
| Power | 18V DC center-negative, 5.5 x 2.1 mm |
| Current draw | 500 mA max |
| Dimensions | 12.6 x 5.8 x 1.8 in (320 x 147 x 46 mm) |
| Weight | 3.1 lb (1408 g) |
FAQ
What power supply does Ampero need? 18V DC center-negative with at least 500 mA, on a 5.5 x 2.1 mm plug. An 18V adapter is included. A standard 9V pedal supply, or the 9V supply of Ampero Mini, will not run it.
Does it have MIDI Out? No. Ampero has a 5-pin MIDI In only, so it can receive program changes and control messages from a controller such as Ampero Control, but it cannot send MIDI to other gear.
Can I add an external expression pedal or footswitch? Yes. The EXP 2/FS jack takes an expression pedal or the Ampero Switch: connect it, then set GLOBAL > EXP2/FS > MODE to Dual FS for the footswitch.
Does Ampero support NAM or captured amp tones? Current firmware adds Sound Clone: up to 10 clone files can be imported with Ampero Editor and used one at a time in place of the amp or drive module. Update both the firmware and Ampero Editor to see the Sound Clone tab. NAM files are not loaded natively, but NAM A1 and A2 files can be converted with Ampero Editor V1.6.0 or later on firmware V5.2 or later.
Can I record with it? Yes. The USB 2.0 Type-B port works as a USB Audio 2.0 interface; it is plug-and-play on macOS and Windows 10, and older Windows versions use the Hotone ASIO driver. A USB cable is not included.
Does it have an effects loop? No. There is no send/return loop, so the four-cable method with external pedals is not available.
Can I plug in an acoustic guitar or a line-level source? Yes. The three-way input selector has electric guitar (1 MΩ), acoustic guitar (4.7 MΩ) and line (10 kΩ) modes.
What is the difference between Ampero and Ampero One? Ampero has a 5-pin MIDI In and a dedicated 18V supply; Ampero One has no MIDI In jack, so a MIDI controller reaches it only through USB with a Bluetooth MIDI bridge app.








