T-Rex Fat Shuga Boost and Reverb

3 reviews

Price:
Sale price€94,95 EUR
Stock:
Sold out

About This Item

A digital reverb and an analog-style clean boost in one enclosure, each with its own footswitch. Reverb sets the wet mix, Decay the length of the tail and Tone its brightness, while the Boost knob drives the separate output stage.

Power is 9 V DC on a negative-centre 2.1 mm barrel, or a 9 V battery, at about 66 mA. Bypass is buffered through a FET stage, which also helps drive long cable runs into the amp.

Description

Boost and reverb in one enclosure — the Fat Shuga sweetens your dry tone with a lush T-Rex reverb algorithm, then pushes it into the front of your amp with a fat, transparent boost.

Which T-Rex reverb is this?

The Fat Shuga is T-Rex's boost-plus-reverb combo pedal — half of it is a warm, always-usable digital reverb with an analog dry path; the other half is a dedicated fat clean boost. For a reverb-only pedal with three algorithm modes and a Tone control, see the T-Rex Creamer Reverb.

Why guitarists choose this pedal

  • Two independent stages — Reverb and Boost — with separate footswitches.
  • Analog dry path preserves your guitar's core tone with zero-latency signal integrity.
  • Fat Boost is voiced to add body and sparkle rather than sterile gain — perfect for solos over a clean amp.
  • Compact, pedalboard-friendly with top-mounted jacks.
  • 9 V DC or 9 V battery operation.

Controls and switches

  • Reverb — mix of the wet reverb signal.
  • Decay — how long the reverb tail rings out.
  • Tone — high-frequency shape of the reverb signal.
  • Boost — output level of the boost stage.
  • Footswitch Reverb — engages the reverb stage.
  • Footswitch Boost — engages the boost stage.

Power and pedalboard compatibility

  • 9 V DC only, negative-center, 2.1 mm barrel (accepts 8.5–12.5 V DC).
  • Current draw ~66 mA — modest for a digital reverb.
  • 9 V battery capable — battery life ~5–7 hours with regular use.
  • Buffered (FET) bypass — place the Fat Shuga late in the chain, after drives and modulation. The buffered output also helps drive long cable runs into the amp.

Technical specifications

Model T-Rex Fat Shuga Boost and Reverb
Effect type Reverb + Clean Boost
Circuit Digital reverb with analog-style boost
Controls Reverb, Decay, Tone, Boost
Bypass Buffered (FET) bypass
Input impedance > 1 MΩ
Output impedance < 1 kΩ
Power 9 V DC (center-negative, 2.1 mm) or 9 V battery
Current draw 66 mA
Jacks Top-mounted input and output
Enclosure dimensions 11.5 × 7.0 × 5.0 cm
Weight 218 g
MPN / SKU 811059011783
GTIN (UPC/EAN) 811059011783
ASIN B00ER81LKO
Country of manufacture China (T-Rex Effects, Denmark)

FAQ

How does it differ from a stand-alone reverb?
The Fat Shuga pairs the reverb with a dedicated clean boost, so you can lift your signal for solos while adding space in one enclosure. If you only need reverb with more voicing options, look at the Creamer Reverb instead.

Is the boost analog?
Yes — the boost stage is analog-style. The reverb runs as a digital algorithm alongside an analog dry path.

Where does it belong in my signal chain?
Reverb goes near the end of the chain — after distortion and modulation, before delay when running in series. The boost stage can also be used before the amp to push the front end harder.

Battery life?
Around 5–7 hours from a fresh 9 V alkaline — battery is fine for occasional use, but a regulated power supply is the daily-driver choice.

Warranty?
2-year manufacturer warranty.

Video Review: T-Rex Fat Shuga Boost and Reverb

You May Also Like

Recently viewed