About This Item
Description
Need drive, chorus and delay without hauling three pedals to practice? The Dapper Mini packs a tuner, an OD/DIST-switchable drive, a chorus and a tap-tempo delay into a 197 mm metal strip, with a cab-sim headphone output so you can practice without waking the house.
Why guitarists choose the Dapper Mini
- The OD/DIST toggle on the DRIVE module gives you two gain characters from one control set — a warm, thick overdrive or a British-style high-gain distortion — instead of needing separate overdrive and distortion pedals.
- The analog-voiced DELAY module goes up to 1000 ms and has tap tempo, so you can match delay time to the song on the fly.
- The adjustable PHONES output includes a cab simulator, so headphone practice still sounds like an amp instead of a raw DI signal; it also works as a line out for recording or a PA.
- Hold the CHORUS module's footswitch to access the built-in tuner; the output mutes while you tune.
Which Dapper effects strip fits your playing?
The Dapper Mini covers compact electric-guitar essentials. The Dapper Indie is a wider 320 mm board with two gain stages (Indie Drive and Fuzz Wall) plus modulation, delay and ambient modules; the Dapper Acoustic Mini swaps drive, chorus and delay for a compressor, an EQ preamp with notch filter and reverb for acoustic-electric guitar.
Controls and modules
- TUNER — first in the chain; hold the CHORUS footswitch to engage it.
- DRIVE — VOL, TONE and GAIN knobs with an OD/DIST toggle.
- CHORUS — LEVEL, RATE and DEPTH knobs.
- DELAY — LEVEL, REGEN and TIME knobs, up to 1000 ms; hold the DELAY footswitch to enter tap tempo, then tap along (the TAP/PHONES LED pulses with the set time); hold again to return to knob-set time.
- TAP/PHONES — knob sets headphone output level; PHONES output with built-in cab simulation.
Connections & Power
- 1/4" INPUT and OUTPUT jacks; PHONES jack with cab sim, also usable as a line out.
- Runs on 9V DC center-negative at 110 mA current draw. No battery operation.
In the Box
- Valeton Dapper Mini effects strip
- 9V DC power adapter
| Model | Valeton Dapper Mini (MES-1) |
|---|---|
| Type | Combined effects strip for electric guitar |
| Modules | TUNER, DRIVE (OD/DIST), CHORUS, DELAY (tap tempo), PHONES with cab sim |
| Max delay time | 1000 ms |
| Footswitches | DRIVE, CHORUS (hold: tuner), DELAY (hold: tap tempo) |
| Connections | 1/4" INPUT, 1/4" OUTPUT, PHONES, 9V DC |
| Power | 9V DC center-negative, 110 mA |
| Dimensions | 7.8 x 2.6 x 1.7 in (197 x 65 x 42 mm) |
| Weight | 14.7 oz (417 g) |
FAQ
Does it come with a power adapter? Yes, a 9V DC center-negative adapter is included. Any replacement or shared supply output should be rated for at least 110 mA.
What's the maximum delay time? Up to 1000 ms. Set it with the TIME knob, or hold the DELAY footswitch to tap it in.
Does the headphone output sound like a real amp? The PHONES output includes a built-in cab simulator, so it's shaped for headphone practice rather than a raw DI signal, and it can also feed a recorder or PA.
How do I access the tuner? Hold the CHORUS module's footswitch; the unit mutes and the tuner activates.
Can I run it on batteries? No, it runs only from a 9V DC adapter.
How is this different from the Dapper Indie? Dapper Indie is a wider 320 mm board with two gain stages (Indie Drive and Fuzz Wall) and more modulation, delay and ambient options; the Dapper Mini is a compact single-drive, single-delay strip.