About This Item
Description
Running a modeler through a guitar cab and getting a muffled, colored tone? The VFR-110 is a flat-response 2-way active speaker built specifically to let your multi-effects processor or amp modeler sound the way it was designed, without a traditional guitar cabinet's tonal coloration.
Why modeler users choose the VFR-110
- Full-range flat response means your modeler's amp/cab sims come through accurately instead of being recolored by a guitar speaker.
- 1300W peak (650W program, 325W rated) Class D power and up to 124 dB max SPL handle stage volume.
- A 10-inch woofer plus a 1-inch tweeter in a 2-way design covers the low end and high-frequency detail modelers need to sound convincing, from 55 Hz to 20 kHz.
- Doubles as a stage monitor wedge for personal monitoring setups, not just a guitar cabinet replacement; it can also go on a speaker stand.
Pairs with your modeler
The VFR-110 works with Valeton multi-effects processors such as the GP-200 family, and with any other amp modeler or multi-effects unit, letting their amp/cab modeling reach the stage without a traditional guitar cabinet's coloration.
Controls
- Independent volume control for each of the two input channels.
- Contour switch: about -3 dB at 1 kHz for a gentle midrange scoop.
- Bass switch: about -8.5 dB at 65 Hz to tame low end on boomy stages.
- Ground lift switch to reduce hum.
Connections & Power
- 2 combo XLR/TRS inputs, one per channel.
- 1 XLR link output to feed a second VFR-110 or another device in parallel.
- Mains powered: 100–240V AC, 50–60 Hz.
| Model | Valeton VFR-110 |
|---|---|
| Type | Active 2-way FRFR speaker / stage monitor wedge |
| Drivers | 10 in LF woofer, 1 in HF tweeter |
| Crossover | 2.6 kHz |
| Amplifier | Class D |
| Power | 1300W peak / 650W program / 325W rated |
| Frequency range | 55 Hz – 20 kHz |
| Max SPL | 124 dB |
| Inputs | 2 x combo XLR/TRS (balanced 44 kΩ / unbalanced 22 kΩ) |
| Output | 1 x XLR link (200 Ω) |
| EQ switches | Contour (-3 dB @ 1 kHz), Bass (-8.5 dB @ 65 Hz) |
| Other | Ground lift, wedge shape, speaker-stand mountable |
| Power input | 100–240V AC, 50–60 Hz; 375W consumption |
| Dimensions | 11.2 x 20.1 x 11.8 in (W x D x H; 285 x 510 x 300 mm) |
| Weight | 23.4 lb (10.6 kg) |
FAQ
What is FRFR and why does it matter for a modeler? Full-range, flat-response means the speaker doesn't color the sound the way a traditional guitar cabinet does, so a multi-effects processor's amp and cab simulations come through as designed.
How much power does the VFR-110 have? 1300W peak, 650W program and 325W rated, with a max SPL of 124 dB.
Can I use it as a stage monitor? Yes, the wedge-shaped cabinet works as a floor monitor, not just a guitar cabinet replacement. It can also be mounted on a speaker stand.
Can I connect two sources or a second speaker? Yes. It has two combo XLR/TRS inputs with independent volume controls, plus an XLR link output to run a second VFR-110 in parallel.
Does it work for bass? It reproduces 55 Hz – 20 kHz, so it suits bass modelers at moderate volume; the Bass switch cuts low end when a room gets boomy.
Is this a passive or active speaker? Active — it has its own built-in Class D amplifier and plugs into the wall (100–240V AC).